AMUSE Vegan Peach Cream SPF 30 Versus Tropic Skincare Calm & Correct 4-In-1 Color-Correcting Treatment SPF 50 PA++++
What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningDibutyl Adipate
EmollientButylene Glycol
HumectantPropanediol
SolventTitanium Dioxide
Cosmetic ColorantGlycerin
HumectantPolyglyceryl-3 Methylglucose Distearate
EmulsifyingC12-15 Alkyl Benzoate
AntimicrobialNiacinamide
SmoothingPhenyl Trimethicone
Skin ConditioningPolysilicone-15
UV FilterMethylpropanediol
SolventTridecyl Trimellitate
Emollient1,2-Hexanediol
Skin ConditioningCetearyl Alcohol
EmollientEthylhexyl Triazone
UV AbsorberPanthenol
Skin ConditioningPentylene Glycol
Skin ConditioningPolysorbate 60
EmulsifyingPrunus Persica Fruit Extract
AbrasiveSimmondsia Chinensis Seed Oil
EmollientSodium Hyaluronate
HumectantBis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Skin ConditioningGlyceryl Stearate
EmollientPolymethylsilsesquioxane
Polyglyceryl-2 Caprate
EmulsifyingPalmitic Acid
EmollientPolyacrylate Crosspolymer-6
Emulsion StabilisingPolyacrylate-13
Ammonium Acryloyldimethyltaurate/Vp Copolymer
Sucrose Stearate
EmollientEthylhexylglycerin
Skin ConditioningPolyisobutene
Sodium Stearoyl Glutamate
CleansingStearic Acid
CleansingAlumina
AbrasiveXanthan Gum
EmulsifyingSaccharomyces Ferment Filtrate
HumectantAdenosine
Skin ConditioningGlyceryl Caprylate
EmollientDisodium EDTA
Squalane
EmollientPolysorbate 20
EmulsifyingSorbitan Isostearate
EmulsifyingT-Butyl Alcohol
PerfumingDimethylsilanol Hyaluronate
HumectantHydrolyzed Sodium Hyaluronate
Skin ConditioningHydrolyzed Hyaluronic Acid
HumectantMyristic Acid
CleansingPotassium Hyaluronate
Skin ConditioningHyaluronic Acid
HumectantSodium Hyaluronate Crosspolymer
HumectantHydroxypropyltrimonium Hyaluronate
Sodium Hyaluronate Dimethylsilanol
HumectantSodium Acetylated Hyaluronate
HumectantTocopherol
AntioxidantParfum
MaskingCI 77492
Cosmetic ColorantCI 77491
Cosmetic ColorantCI 77499
Cosmetic ColorantWater, Dibutyl Adipate, Butylene Glycol, Propanediol, Titanium Dioxide, Glycerin, Polyglyceryl-3 Methylglucose Distearate, C12-15 Alkyl Benzoate, Niacinamide, Phenyl Trimethicone, Polysilicone-15, Methylpropanediol, Tridecyl Trimellitate, 1,2-Hexanediol, Cetearyl Alcohol, Ethylhexyl Triazone, Panthenol, Pentylene Glycol, Polysorbate 60, Prunus Persica Fruit Extract, Simmondsia Chinensis Seed Oil, Sodium Hyaluronate, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, Glyceryl Stearate, Polymethylsilsesquioxane, Polyglyceryl-2 Caprate, Palmitic Acid, Polyacrylate Crosspolymer-6, Polyacrylate-13, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Sucrose Stearate, Ethylhexylglycerin, Polyisobutene, Sodium Stearoyl Glutamate, Stearic Acid, Alumina, Xanthan Gum, Saccharomyces Ferment Filtrate, Adenosine, Glyceryl Caprylate, Disodium EDTA, Squalane, Polysorbate 20, Sorbitan Isostearate, T-Butyl Alcohol, Dimethylsilanol Hyaluronate, Hydrolyzed Sodium Hyaluronate, Hydrolyzed Hyaluronic Acid, Myristic Acid, Potassium Hyaluronate, Hyaluronic Acid, Sodium Hyaluronate Crosspolymer, Hydroxypropyltrimonium Hyaluronate, Sodium Hyaluronate Dimethylsilanol, Sodium Acetylated Hyaluronate, Tocopherol, Parfum, CI 77492, CI 77491, CI 77499
Aloe Barbadensis Leaf Juice
Skin ConditioningDibutyl Adipate
EmollientDiethylamino Hydroxybenzoyl Hexyl Benzoate
UV FilterWater
Skin ConditioningPolyglyceryl-4 Diisostearate/Polyhydroxystearate/Sebacate
EmulsifyingEthylhexyl Triazone
UV AbsorberPropanediol
SolventDicaprylyl Carbonate
EmollientCoconut Alkanes
EmollientBis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Skin ConditioningPalmitic/Stearic Triglyceride
Glycerin
HumectantZinc Stearate
Cosmetic ColorantNiacinamide
SmoothingCaprylyl Caprylate/Caprate
EmollientLactobacillus Ferment
Skin ConditioningOryza Sativa Bran Cera
Skin ConditioningHydrogenated Coconut Oil
EmollientCoco-Caprylate/Caprate
EmollientHydroxystearic Acid
CleansingMagnesium Sulfate
Mica
Cosmetic ColorantCellulose
AbsorbentCeramide NP
Skin ConditioningAdansonia Digitata Fruit Extract
EmollientPanthenol
Skin ConditioningSodium Gluconate
Skin ConditioningFucoidan
AntioxidantTocopherol
AntioxidantSodium Hyaluronate
HumectantXanthan Gum
EmulsifyingAsiatic Acid
Skin ConditioningAsiaticoside
AntioxidantMadecassic Acid
Skin ConditioningButylene Glycol
HumectantMacrocystis Pyrifera Protein
Skin ConditioningJojoba Esters
EmollientCentella Asiatica Leaf Vesicles
Helianthus Annuus Seed Oil
EmollientZein
Skin ConditioningSodium Dehydroacetate
PreservativeSodium Levulinate
Skin ConditioningSodium Anisate
AntimicrobialAlgin
MaskingCI 77891
Cosmetic ColorantCI 77491
Cosmetic ColorantCI 77510
Cosmetic ColorantCI 77492
Cosmetic ColorantAloe Barbadensis Leaf Juice, Dibutyl Adipate, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Water, Polyglyceryl-4 Diisostearate/Polyhydroxystearate/Sebacate, Ethylhexyl Triazone, Propanediol, Dicaprylyl Carbonate, Coconut Alkanes, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, Palmitic/Stearic Triglyceride, Glycerin, Zinc Stearate, Niacinamide, Caprylyl Caprylate/Caprate, Lactobacillus Ferment, Oryza Sativa Bran Cera, Hydrogenated Coconut Oil, Coco-Caprylate/Caprate, Hydroxystearic Acid, Magnesium Sulfate, Mica, Cellulose, Ceramide NP, Adansonia Digitata Fruit Extract, Panthenol, Sodium Gluconate, Fucoidan, Tocopherol, Sodium Hyaluronate, Xanthan Gum, Asiatic Acid, Asiaticoside, Madecassic Acid, Butylene Glycol, Macrocystis Pyrifera Protein, Jojoba Esters, Centella Asiatica Leaf Vesicles, Helianthus Annuus Seed Oil, Zein, Sodium Dehydroacetate, Sodium Levulinate, Sodium Anisate, Algin, CI 77891, CI 77491, CI 77510, CI 77492
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
This ingredient is better known as bemotrizinol or Tinosorb S and is one of the best broad-spectrum UV filters in modern sunscreen.
It works by absorbing UV light across a whole range (280-400 nm) with peaks around 310 nm (UVB) and 340-345 nm (UVA). This means it covers UVB plus the deeper UVA wavelengths that drive photoaging and pigmentation.
Another pro?
It's exceptionally photostable, barely degrades in sunlight, and acts as a "bodyguard" for less stable filters.
That's why you'll see it paired with avobenzone or octinoxate; this team up ensures they keep working through sun exposure.
Safety reviews have been reassuring across the board. This ingredient shows low absorption through the skin, rarely irritates, and lab studies found it doesn't act like a hormone in the body (a concern that's been raised about some older sunscreen filters).
On maximum concentrations:
In 2026, the US F.D.A finally added it as an OTC sunscreen ingredient at concentrations up to 6% for adults / children 6 months and older
Learn more about Bis-Ethylhexyloxyphenol Methoxyphenyl TriazineButylene Glycol (or BG) is used within cosmetic products for a few different reasons:
Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
Learn more about Butylene GlycolCi 77491 is also hydrated iron III oxide. It's sole purpose is to give a red/pink hue to products.
Iron III oxides are classified as inorganic chemicals for coloring.
Synthetically created Ci 77491 is considered safer than those naturally found. This is because the synthetically created version may contain less impurities. Iron oxides are generally non-toxic and non-allergenic.
Learn more about CI 77491CI 77492 is also hydrated iron III oxide. It's sole purpose is to give a yellow hue to products.
Iron III oxides are classified as inorganic chemicals for coloring.
Synthetically created CI 77492 is considered safer than those naturally found. This is because the synthetically created version may contain less impurities. Iron oxides are generally non-toxic and non-allergenic.
Learn more about CI 77492Dibutyl Adipate is a lightweight, oil-soluble ester that acts as an emollient and solvent. It helps products spread more easily and leaves a soft, silky, dry-touch finish without being greasy.
You'll likely see this ingredient in sunscreens because it does a nice job dissolving UV filters and keeping them evenly distributed.
This ingredient has been found to be safe as used in cosmetics, wasn't a skin or eye irritant in clinical patch testing, and wasn't phototoxic.
In a clinical comedogenicity test, this ingredient tested negative so it isn't likely to clog pores.
Typical use levels are about 5-8% for sunscreens + nail products, but can range from 0.005%-8% depending on the product.
Learn more about Dibutyl AdipateEthylhexyl Triazone (aka Octyl Triazone) is an oil-soluble organic UVB filter. It has peak absorption around 314 nm, right in the middle of the UVB range.
This ingredient is described as one of the most effective UVB filters available and small concentrations are enough to deliver a high SPF thanks to its strong UV absorbing power.
Formulators love it for its stability; its ability to filter UV stays practically unchanged even under intense radiation and it can also help boost the photostability of less stable filters like avobenzone.
It's also a great pick for water resistant products because it's insoluble in water and has a good affinity for keratin.
Because it's a big, heavy molecule, the European Scientific Committee has found to to have very low dermal penetration and negative results for allergenicity.
In vitro testing also showed a low absorption rate and clean results on irritation.
Typical use levels are 1-5% with 5% being the maximum in the EU, Japan, and other markets that allow it. However, this ingredient is not approved yet in the US or Canada.
Learn more about Ethylhexyl TriazoneGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinNiacinamide is a multitasking form of vitamin B3 that strengthens the skin barrier, reduces pores and dark spots, regulates oil, and improves signs of aging.
And the best part? It's gentle and well-tolerated by most skin types, including sensitive and reactive skin.
You might have heard of "niacin flush", or the reddening of skin that causes itchiness. Niacinamide has not been found to cause this.
In very rare cases, some individuals may not be able to tolerate niacinamide at all or experience an allergic reaction to it.
If you are experiencing flaking, irritation, and dryness with this ingredient, be sure to double check all your products as this ingredient can be found in all categories of skincare.
When incorporating niacinamide into your routine, look out for concentration amounts. Typically, 5% niacinamide provides benefits such as fading dark spots. However, if you have sensitive skin, it is better to begin with a smaller concentration.
When you apply niacinamide to your skin, your body converts it into nicotinamide adenine dinucleotide (NAD). NAD is an essential coenzyme that is already found in your cells as "fuel" and powers countless biological processes.
In your skin, NAD helps repair cell damage, produce new healthy cells, support collagen production, strengthen the skin barrier, and fight environmental stressors (like UV and pollution).
Our natural NAD levels start to decline with age, leading to slower skin repair, visible aging, and a weaker skin barrier. By providing your skin niacinamide, you're recharging your skin's NAD levels. This leads to stronger, healthier, and younger looking skin.
Another name for vitamin B3 is nicotinamide. This vitamin is water-soluble and our bodies don't store it. We obtain Vitamin B3 from either food or skincare. Meat, fish, wheat, yeast, and leafy greens contain vitamin B3.
The type of niacinamide used in skincare is synthetically created.
Learn more about NiacinamidePanthenol is a common ingredient that helps hydrate and soothe the skin. It is found naturally in our skin and hair.
There are two forms of panthenol: D and L.
D-panthenol is also known as dexpanthenol. Most cosmetics use dexpanthenol or a mixture of D and L-panthenol.
Panthenol is famous due to its ability to go deeper into the skin's layers. Using this ingredient has numerous pros (and no cons):
Like hyaluronic acid, panthenol is a humectant. Humectants are able to bind and hold large amounts of water to keep skin hydrated.
This ingredient works well for wound healing. It works by increasing tissue in the wound and helps close open wounds.
Once oxidized, panthenol converts to pantothenic acid. Panthothenic acid is found in all living cells.
This ingredient is also referred to as pro-vitamin B5.
Learn more about PanthenolPropanediol is an all-star ingredient. It softens, hydrates, and smooths the skin.
It’s often used to:
Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.
Learn more about PropanediolSodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.
In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.
Interestingly, the size of the molecule affects its behavior:
Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.
Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.
You'll typically see concentrations between 0.1-2% for this ingredient.
Learn more about Sodium HyaluronateTocopherol is a fat-soluble antioxidant known as Vitamin E.
You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.
Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.
It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.
This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.
This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.
In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.
Concentrations usually range from 0.1-1% in most leave-on products.
Learn more about TocopherolWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about WaterXanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.
On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.
Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.
Learn more about Xanthan Gum