What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningMethylheptyl Isostearate
Skin ConditioningCyclopentasiloxane
EmollientCetyl Alcohol
EmollientDiglycerin
HumectantDimethicone
EmollientPentylene Glycol
Skin ConditioningPrunus Armeniaca Kernel Oil
MaskingGlyceryl Stearate
EmollientPEG-100 Stearate
SurfactantIsohexadecane
EmollientPropanediol
SolventGlycerin
HumectantNiacinamide
SmoothingPalmitoyl Tetrapeptide-7
Skin ConditioningSodium Ascorbyl Phosphate
AntioxidantAlgae Extract
EmollientRetinol
Skin ConditioningSaccharomyces Lysate Extract
HumectantPalmitoyl Tripeptide-5
Skin ConditioningAvena Sativa Kernel Extract
AbrasiveDunaliella Salina Extract
Skin ConditioningPanthenol
Skin ConditioningHydrolyzed Lupine Protein
Skin ConditioningDipeptide-2
Skin ConditioningAscorbyl Palmitate
AntioxidantSodium Hyaluronate
HumectantMedicago Sativa Seed Extract
Skin ConditioningHydrolyzed Soy Protein
HumectantGlycyrrhiza Glabra Root Extract
BleachingBisabolol
AntioxidantCaffeine
Skin ConditioningGlucosamine Hcl
Aleurites Moluccanus Seed Oil
Skin ConditioningFraxinus Excelsior Bark Extract
Skin ConditioningTocopherol
AntioxidantSilanetriol
Palmitoyl Tripeptide-1
Skin ConditioningCeramide NP
Skin ConditioningLecithin
EmollientArginine/Lysine Polypeptide
Skin ConditioningTremella Fuciformis Polysaccharide
Emulsion StabilisingCamellia Sinensis Leaf Extract
AntimicrobialCucumis Sativus Fruit Extract
EmollientTocopheryl Acetate
AntioxidantCorallina Officinalis Extract
Skin ConditioningDimethiconol
EmollientHesperidin Methyl Chalcone
AntioxidantPantolactone
HumectantSodium Lactate
BufferingLeuconostoc/Radish Root Ferment Filtrate
AntimicrobialAcrylates/C10-30 Alkyl Acrylate Crosspolymer
Emulsion StabilisingLaureth-23
CleansingOryza Sativa Bran Extract
Skin ConditioningUrea
BufferingPolyglycerin-3
HumectantHelianthus Annuus Seed Oil
EmollientCetyl Palmitate
EmollientTrideceth-6 Phosphate
EmulsifyingButylene Glycol
HumectantCarbomer
Emulsion StabilisingPotassium Sorbate
PreservativeOleth-20
CleansingSodium Acrylates Copolymer
Isostearic Acid
CleansingSteareth-20
CleansingPolysorbate 20
EmulsifyingCaprylic/Capric Triglyceride
MaskingDisodium EDTA
Sodium Benzoate
MaskingBHA
AntioxidantPotassium Citrate
BufferingCitric Acid
BufferingBHT
AntioxidantSodium Hydroxide
BufferingAminomethyl Propanol
BufferingEthylhexylglycerin
Skin ConditioningPhenoxyethanol
PreservativeWater, Methylheptyl Isostearate, Cyclopentasiloxane, Cetyl Alcohol, Diglycerin, Dimethicone, Pentylene Glycol, Prunus Armeniaca Kernel Oil, Glyceryl Stearate, PEG-100 Stearate, Isohexadecane, Propanediol, Glycerin, Niacinamide, Palmitoyl Tetrapeptide-7, Sodium Ascorbyl Phosphate, Algae Extract, Retinol, Saccharomyces Lysate Extract, Palmitoyl Tripeptide-5, Avena Sativa Kernel Extract, Dunaliella Salina Extract, Panthenol, Hydrolyzed Lupine Protein, Dipeptide-2, Ascorbyl Palmitate, Sodium Hyaluronate, Medicago Sativa Seed Extract, Hydrolyzed Soy Protein, Glycyrrhiza Glabra Root Extract, Bisabolol, Caffeine, Glucosamine Hcl, Aleurites Moluccanus Seed Oil, Fraxinus Excelsior Bark Extract, Tocopherol, Silanetriol, Palmitoyl Tripeptide-1, Ceramide NP, Lecithin, Arginine/Lysine Polypeptide, Tremella Fuciformis Polysaccharide, Camellia Sinensis Leaf Extract, Cucumis Sativus Fruit Extract, Tocopheryl Acetate, Corallina Officinalis Extract, Dimethiconol, Hesperidin Methyl Chalcone, Pantolactone, Sodium Lactate, Leuconostoc/Radish Root Ferment Filtrate, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Laureth-23, Oryza Sativa Bran Extract, Urea, Polyglycerin-3, Helianthus Annuus Seed Oil, Cetyl Palmitate, Trideceth-6 Phosphate, Butylene Glycol, Carbomer, Potassium Sorbate, Oleth-20, Sodium Acrylates Copolymer, Isostearic Acid, Steareth-20, Polysorbate 20, Caprylic/Capric Triglyceride, Disodium EDTA, Sodium Benzoate, BHA, Potassium Citrate, Citric Acid, BHT, Sodium Hydroxide, Aminomethyl Propanol, Ethylhexylglycerin, Phenoxyethanol
Water
Skin ConditioningDimethicone
EmollientPentylene Glycol
Skin ConditioningSorbitol
HumectantSimmondsia Chinensis Seed Oil
EmollientButylene Glycol
HumectantGlycerin
HumectantPEG-40 Hydrogenated Castor Oil
EmulsifyingSaccharomyces Ferment Lysate Filtrate
Skin ConditioningTephrosia Purpurea Seed Extract
Skin ConditioningHydrolyzed Sodium Hyaluronate
Skin ConditioningNiacinamide
SmoothingDiglucosyl Gallic Acid
Citrus Reticulata Leaf Oil
MaskingAmmonium Acryloyldimethyltaurate/Vp Copolymer
Maris Aqua
HumectantPropanediol
SolventSodium Hyaluronate
HumectantVetiveria Zizanoides Root Oil
MaskingLavandula Angustifolia Oil
MaskingRosa Damascena Flower Oil
MaskingSalvia Sclarea Oil
MaskingHydrolyzed Algin
Aniba Rosaeodora Wood Oil
AstringentCananga Odorata Flower Oil
MaskingGlyceryl Stearate Se
EmulsifyingMethyl Lactate
PerfumingPEG-100 Stearate
SurfactantAcrylates/C10-30 Alkyl Acrylate Crosspolymer
Emulsion StabilisingTocopherol
AntioxidantSucrose
HumectantCaprylic/Capric Triglyceride
MaskingEthylhexylglycerin
Skin ConditioningSodium Hydroxide
BufferingTetrasodium Glutamate Diacetate
Aminomethyl Propanol
BufferingXanthan Gum
EmulsifyingLinalool
PerfumingGeraniol
PerfumingPhenoxyethanol
PreservativeWater, Dimethicone, Pentylene Glycol, Sorbitol, Simmondsia Chinensis Seed Oil, Butylene Glycol, Glycerin, PEG-40 Hydrogenated Castor Oil, Saccharomyces Ferment Lysate Filtrate, Tephrosia Purpurea Seed Extract, Hydrolyzed Sodium Hyaluronate, Niacinamide, Diglucosyl Gallic Acid, Citrus Reticulata Leaf Oil, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Maris Aqua, Propanediol, Sodium Hyaluronate, Vetiveria Zizanoides Root Oil, Lavandula Angustifolia Oil, Rosa Damascena Flower Oil, Salvia Sclarea Oil, Hydrolyzed Algin, Aniba Rosaeodora Wood Oil, Cananga Odorata Flower Oil, Glyceryl Stearate Se, Methyl Lactate, PEG-100 Stearate, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Tocopherol, Sucrose, Caprylic/Capric Triglyceride, Ethylhexylglycerin, Sodium Hydroxide, Tetrasodium Glutamate Diacetate, Aminomethyl Propanol, Xanthan Gum, Linalool, Geraniol, Phenoxyethanol
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic polymer. It is used to thicken, emulsify, and improve the texture of products.
As an emulsifier, it helps stabilize oil-in-water emulsions to give products an elegant feel when applied.
It can also form a thin protective film on skin. One study found that a formula using this polymer helped slow down how quickly other ingredients (like DEET) were absorbed through skin.
A 2024 study of over 1,300 patients confirmed that sensitization to this ingredient is rare. It is also non-mutagenic and has a clean track record.
Learn more about Acrylates/C10-30 Alkyl Acrylate CrosspolymerAminomethyl Propanol is used to adjust the pH of products. It is also used as a base to create other organic compounds. Having a balanced pH is important for protecting your skin.
Aminomethyl propanol is safe to use in cosmetics up to 1%. It is soluble in water.
Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:
Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
Learn more about Butylene GlycolCaprylic/Capric Triglyceride (aka MCT Oil) is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping to prevent moisture loss.
Though it behaves like an oil, it is not technically one due to its chemical composition. One perk of this ingredient is that it is very stable, resistant to oxidation, and unlikely to go rancid.
In practice, that translates to a long shelf life and a consistently elegant skin feel.
While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Just patch test if you have concerns.
Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.
This ingredient is treated as the gold standard fungal acne safe oil. Even though it is coconut derived, the problematic lauric acid is stripped out.
This leaves just caprylic (C8) and capric (C10) acid. These chain lengths actually trend antifungal; a 2020 study found caprylic acid was enough to disrupt Malassezia furfur cell membrane, with a caprylic acid derivative damaging membrane structures at concentrations as low as 0.2%.
Learn more about Caprylic/Capric TriglycerideDimethicone is a type of synthetic silicone created from natural materials such as quartz. It is also known as polydimethylsiloxane.
What it does:
Dimethicone comes in different viscosities:
Depending on the viscosity, dimethicone has different properties.
Ingredients lists don't always show which type is used, so we recommend reaching out to the brand if you have questions about the viscosity.
This ingredient is unlikely to cause irritation because it does not get absorbed into skin. However, people with silicone allergies should be careful about using this ingredient.
Note: Dimethicone may contribute to pilling. This is because it is not oil or water soluble, so pilling may occur when layered with products. When mixed with heavy oils in a formula, the outcome is also quite greasy.
Learn more about DimethiconeEthylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Learn more about EthylhexylglycerinGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinNiacinamide is a multitasking form of vitamin B3 that strengthens the skin barrier, reduces pores and dark spots, regulates oil, and improves signs of aging.
And the best part? It's gentle and well-tolerated by most skin types, including sensitive and reactive skin.
You might have heard of "niacin flush", or the reddening of skin that causes itchiness. Niacinamide has not been found to cause this.
In very rare cases, some individuals may not be able to tolerate niacinamide at all or experience an allergic reaction to it.
If you are experiencing flaking, irritation, and dryness with this ingredient, be sure to double check all your products as this ingredient can be found in all categories of skincare.
When incorporating niacinamide into your routine, look out for concentration amounts. Typically, 5% niacinamide provides benefits such as fading dark spots. However, if you have sensitive skin, it is better to begin with a smaller concentration.
When you apply niacinamide to your skin, your body converts it into nicotinamide adenine dinucleotide (NAD). NAD is an essential coenzyme that is already found in your cells as "fuel" and powers countless biological processes.
In your skin, NAD helps repair cell damage, produce new healthy cells, support collagen production, strengthen the skin barrier, and fight environmental stressors (like UV and pollution).
Our natural NAD levels start to decline with age, leading to slower skin repair, visible aging, and a weaker skin barrier. By providing your skin niacinamide, you're recharging your skin's NAD levels. This leads to stronger, healthier, and younger looking skin.
Another name for vitamin B3 is nicotinamide. This vitamin is water-soluble and our bodies don't store it. We obtain Vitamin B3 from either food or skincare. Meat, fish, wheat, yeast, and leafy greens contain vitamin B3.
The type of niacinamide used in skincare is synthetically created.
Learn more about NiacinamidePeg-100 Stearate is an emollient and emulsifier. As an emollient, it helps keep skin soft by trapping moisture in. On the other hand, emulsifiers help prevent oil and water from separating in a product.
PEGS are a hydrophilic polyether compound . There are 100 ethylene oxide monomers in Peg-100 Stearate. Peg-100 Stearate is polyethylene glycol ester of stearic acid.
Pentylene Glycol (1,2-pentanediol) is a multitasking little diol with three main roles in a formula:
Research on alkanediols (the family pentylene glycol belongs to) show they work by disrupting microbial cell membranes. This disruption helps the primary preservative system in a product work more effectively at lower doses.
On the safety side, the Cosmetic Ingredient Review Expert Panel has concluded this ingredient to be safe as used in current cosmetic practices + concentrations.
Typical use levels in a formula run about 1-5%.
Learn more about Pentylene GlycolPhenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).
It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.
On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.
Another perk of this ingredient is that it stays functional across a wide pH range (3-10).
You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.
Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.
Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.
Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.
Learn more about PhenoxyethanolPropanediol is an all-star ingredient. It softens, hydrates, and smooths the skin.
It’s often used to:
Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.
Learn more about PropanediolSodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.
In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.
Interestingly, the size of the molecule affects its behavior:
Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.
Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.
You'll typically see concentrations between 0.1-2% for this ingredient.
Learn more about Sodium HyaluronateSodium Hydroxide is also known as lye or caustic soda. It is used to adjust the pH of products; many ingredients require a specific pH to be effective.
In small amounts, sodium hydroxide is considered safe to use. However, large amounts may cause chemical burns due to its high alkaline.
Your skin has a natural pH and acid mantle. This acid mantle helps prevent harmful bacteria from breaking through. The acid mantle also helps keep your skin hydrated.
"Alkaline" refers to a high pH level. A low pH level would be considered acidic.
Learn more about Sodium HydroxideTocopherol is a fat-soluble antioxidant known as Vitamin E.
You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.
Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.
It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.
This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.
This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.
In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.
Concentrations usually range from 0.1-1% in most leave-on products.
Learn more about TocopherolWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water