What's inside
What's inside
Key Ingredients
Benefits
Concerns
No concerns
Ingredients Side-by-side
Water
Skin ConditioningGlycerin
HumectantNiacinamide
SmoothingXylitylglucoside
HumectantEctoin
Skin ConditioningDiglycerin
HumectantAnhydroxylitol
HumectantPropylene Glycol
HumectantC15-19 Alkane
SolventPropylene Glycol Dicaprylate/Dicaprate
EmollientSqualane
EmollientSaccharide Isomerate
HumectantCaprylic/Capric Triglyceride
MaskingGlyceryl Acrylate/Acrylic Acid Copolymer
HumectantHydroxyethyl Urea
HumectantBetaine
HumectantXylitol
HumectantPolyacrylate Crosspolymer-6
Emulsion StabilisingLactobacillus Ferment Lysate
Skin ConditioningArginine
MaskingCamellia Sinensis Leaf Extract
AntimicrobialPolyglyceryl-4 Caprate
EmulsifyingHelianthus Annuus Seed Oil
EmollientCeramide NP
Skin ConditioningBentonite
AbsorbentCeramide Ng
Skin ConditioningCeramide AP
Skin ConditioningPhytosterols
Skin ConditioningPhytosphingosine
Skin ConditioningPropanediol
SolventAcacia Senegal Gum
MaskingAcetylphytosphingosine
Skin ConditioningQuartz
AbrasiveAstragalus Gummifer Gum
Emulsion StabilisingSodium Hyaluronate
HumectantHydrolyzed Hyaluronic Acid
HumectantSodium Acetylated Hyaluronate
HumectantAmmonium Acryloyldimethyltaurate/Vp Copolymer
Isododecane
EmollientNeopentyl Glycol Diheptanoate
EmollientPentylene Glycol
Skin ConditioningXanthan Gum
EmulsifyingCetyl Alcohol
EmollientDisodium EDTA
Methyl Diisopropyl Propionamide
MaskingEthylhexylglycerin
Skin ConditioningGlucose
HumectantGlyceryl Stearate
EmollientStearyl Alcohol
EmollientErythritol
HumectantPolyglycerin-3
HumectantAlcohol
AntimicrobialPvm/Ma Copolymer
Emulsion StabilisingPolyglyceryl-10 Stearate
Skin ConditioningCarbomer
Emulsion StabilisingTris(Tetramethylhydroxypiperidinol)Citrate
StabilisingButylene Glycol
HumectantEthyl Menthane Carboxamide
TonicMenthyl Lactate
MaskingIsopropyl Palmitate
EmollientHydroxypropylcellulose
EmulsifyingSodium Citrate
BufferingCitric Acid
BufferingHibiscus Sabdariffa Fruit Extract
1,2-Hexanediol
Skin ConditioningPotassium Hydroxide
BufferingPhenoxyethanol
PreservativeSodium Benzoate
MaskingPotassium Sorbate
PreservativeWater, Glycerin, Niacinamide, Xylitylglucoside, Ectoin, Diglycerin, Anhydroxylitol, Propylene Glycol, C15-19 Alkane, Propylene Glycol Dicaprylate/Dicaprate, Squalane, Saccharide Isomerate, Caprylic/Capric Triglyceride, Glyceryl Acrylate/Acrylic Acid Copolymer, Hydroxyethyl Urea, Betaine, Xylitol, Polyacrylate Crosspolymer-6, Lactobacillus Ferment Lysate, Arginine, Camellia Sinensis Leaf Extract, Polyglyceryl-4 Caprate, Helianthus Annuus Seed Oil, Ceramide NP, Bentonite, Ceramide Ng, Ceramide AP, Phytosterols, Phytosphingosine, Propanediol, Acacia Senegal Gum, Acetylphytosphingosine, Quartz, Astragalus Gummifer Gum, Sodium Hyaluronate, Hydrolyzed Hyaluronic Acid, Sodium Acetylated Hyaluronate, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Isododecane, Neopentyl Glycol Diheptanoate, Pentylene Glycol, Xanthan Gum, Cetyl Alcohol, Disodium EDTA, Methyl Diisopropyl Propionamide, Ethylhexylglycerin, Glucose, Glyceryl Stearate, Stearyl Alcohol, Erythritol, Polyglycerin-3, Alcohol, Pvm/Ma Copolymer, Polyglyceryl-10 Stearate, Carbomer, Tris(Tetramethylhydroxypiperidinol)Citrate, Butylene Glycol, Ethyl Menthane Carboxamide, Menthyl Lactate, Isopropyl Palmitate, Hydroxypropylcellulose, Sodium Citrate, Citric Acid, Hibiscus Sabdariffa Fruit Extract, 1,2-Hexanediol, Potassium Hydroxide, Phenoxyethanol, Sodium Benzoate, Potassium Sorbate
Water
Skin ConditioningButylene Glycol
HumectantPanthenol 5%
Skin ConditioningGlycerin
HumectantPropanediol
Solvent1,2-Hexanediol
Skin ConditioningSodium Hyaluronate
HumectantSodium Hyaluronate Crosspolymer
HumectantSodium Acetylated Hyaluronate
HumectantHydrolyzed Sodium Hyaluronate
Skin ConditioningHydrolyzed Hyaluronic Acid
HumectantAllantoin
Skin ConditioningSh-Oligopeptide-1
Skin ConditioningCarnosine
Skin ConditioningArginine/Lysine Polypeptide
Skin ConditioningPentylene Glycol
Skin ConditioningSorbitan Isostearate
EmulsifyingGlyceryl Caprylate
EmollientHydrogenated Polydecene
EmollientCetearyl Glucoside
EmulsifyingMethyl Glucose Sesquistearate
EmollientPolyglyceryl-3 Methylglucose Distearate
EmulsifyingCaprylyl Glycol
EmollientIsoamyl Laurate
EmollientGlyceryl Acrylate/Acrylic Acid Copolymer
HumectantAcrylates/C10-30 Alkyl Acrylate Crosspolymer
Emulsion StabilisingSqualane
EmollientTrisodium Ethylenediamine Disuccinate
Hydrogenated Lecithin
EmulsifyingCellulose
AbsorbentHydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Emulsion StabilisingPvm/Ma Copolymer
Emulsion StabilisingSodium Phosphate
BufferingXanthan Gum
EmulsifyingCarbomer
Emulsion StabilisingTromethamine
BufferingEthylhexylglycerin
Skin ConditioningArginine
MaskingMalachite Extract
AntioxidantWater, Butylene Glycol, Panthenol 5%, Glycerin, Propanediol, 1,2-Hexanediol, Sodium Hyaluronate, Sodium Hyaluronate Crosspolymer, Sodium Acetylated Hyaluronate, Hydrolyzed Sodium Hyaluronate, Hydrolyzed Hyaluronic Acid, Allantoin, Sh-Oligopeptide-1, Carnosine, Arginine/Lysine Polypeptide, Pentylene Glycol, Sorbitan Isostearate, Glyceryl Caprylate, Hydrogenated Polydecene, Cetearyl Glucoside, Methyl Glucose Sesquistearate, Polyglyceryl-3 Methylglucose Distearate, Caprylyl Glycol, Isoamyl Laurate, Glyceryl Acrylate/Acrylic Acid Copolymer, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Squalane, Trisodium Ethylenediamine Disuccinate, Hydrogenated Lecithin, Cellulose, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Pvm/Ma Copolymer, Sodium Phosphate, Xanthan Gum, Carbomer, Tromethamine, Ethylhexylglycerin, Arginine, Malachite Extract
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.
It is a:
- Humectant, drawing moisture into the skin
- Emollient, helping to soften skin
- Solvent, dispersing and stabilizing formulas
- Preservative booster, enhancing the antimicrobial activity of other preservatives
Arginine is a semi-essential amino acid. This just means our bodies can product a bit on its own, but sometimes needs a little boost from food sources.
It is a part of your skin's natural moisturizing factor (NMF), or the water-loving molecules in your outermost layer of skin (stratum corneum) that keeps everything hydrated and happy.
Here's an interesting thing about Arginine: your skin converts it into urea through the Krebs-Henseleit urea cycle. Urea is one of the most effective humectants your skin naturally produces.
A clinical study showed applying 2.5% arginine hydrochloride to atopic dermatitis skin showed significant urea levels in the stratum corneum and improved moisture in just four weeks.
Arginine is also a precursor to nitric oxide; nitric oxide improves microcirculation and supports wound healing and collagen synthesis.
One study found that an amino acid complex containing Arginine reduced skin irritation, improved hydration, and accelerated skin repair in clinical / in-vivo studies.
Arginine itself is an amino acid and not a fatty acid, oil, or ester. On its own, it's not a direct food source for Malassezia, or the yeast that causes fungal acne.
Learn more about ArginineButylene Glycol (or BG) is used within cosmetic products for a few different reasons:
Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
Learn more about Butylene GlycolCarbomer is a high-molecular weight polymer of acrylic acid. It is used to form gels and thicken formulas.
Due to its large molecular size, carbomer has minimal skin penetration and is considered an inert ingredient.
A high amount of carbomer can cause pilling or balling up of products. Don't worry, most products contain 1% or less of carbomer.
Learn more about CarbomerEthylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Learn more about EthylhexylglycerinGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinGlyceryl Acrylate/Acrylic Acid Copolymer is made up of glycerin and polyacrylic acid. It helps hydrate your skin as a humectant.
This ingredient forms a hydrogel that delivers moisturizing, water-based ingredients to the skin. It is also used to thicken a product and to give it a smooth texture.
Acrylic acid itself is toxic, but the polymer form (this ingredient) is too large to penetrate skin, making it non-toxic.
Learn more about Glyceryl Acrylate/Acrylic Acid CopolymerHydrolyzed Hyaluronic Acid is hyaluronic acid (HA) that is broken down into lower molecular weight fragments.
It's a humectant that pulls and holds water in the skin to help with hydration, plumpness, and reduce transepidermal water loss.
Because hydrolyzed hyaluronic acid is smaller in size, it can slip past your outermost layer of skin more easily than full-sized HA.
Most formulations will combine all sizes to get the best of both worlds.
Typical usage levels range from 0.01-1%. Any percentage higher than 2% might become goopy and tacky.
Learn more about Hydrolyzed Hyaluronic AcidPentylene glycol is typically used within a product to thicken it. It also adds a smooth, soft, and moisturizing feel to the product. It is naturally found in plants such as sugar beets.
The hydrophilic trait of Pentylene Glycol makes it a humectant. As a humectant, Pentylene Glycol helps draw moisture from the air to your skin. This can help keep your skin hydrated.
This property also makes Pentylene Glycol a great texture enhancer. It can also help thicken or stabilize a product.
Pentylene Glycol also acts as a mild preservative and helps to keep a product microbe-free.
Some people may experience mild eye and skin irritation from Pentylene Glycol. We always recommend speaking with a professional about using this ingredient in your routine.
Pentylene Glycol has a low molecular weight and is part of the 1,2-glycol family.
Learn more about Pentylene GlycolPropanediol is an all-star ingredient. It softens, hydrates, and smooths the skin.
It’s often used to:
Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.
Learn more about PropanediolPVM/MA Copolymer is a synthetic and high-molecular weight polymer. It is used to create a flexible film that helps ingredients "stick together" on hair or skin. It also helps reduce static, help emulsions behave, and tweaks the thickness and flow of a product.
You'll most likely find this ingredient in hair styling products because that film is what helps styles last.
Sodium Acetylated Hyaluronate is a type of Hyaluronic Acid.
Hyaluronic Acids help moisturize, soothe, and protect the skin.
Read about common types of Hyaluronic Acid here:
Learn more about Sodium Acetylated HyaluronateSodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.
In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.
Interestingly, the size of the molecule affects its behavior:
Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.
Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.
You'll typically see concentrations between 0.1-2% for this ingredient.
Learn more about Sodium HyaluronateSqualane is the hydrogenated and shelf-stable form of squalene (a lipid that naturally occurs in human sebum).
It is an emollient and skin conditioning agent that is able to integrate seamlessly into the skin's lipid barrier without clogging pores.
This is due to how structurally similar it is to what your skin already produces.
Though it is mostly an emollient that helps soften and hydrate skin, it also has some humectant and occlusive action. Humectants help the skin retain moisture while occlusives seal it in, making squalane a triple-threat moisturizer.
Research shows it has antioxidant capabilities that help protect against stressors like UV exposure, specifically UVA induced oxidative stress. This study also found that it supports collagen biosynthesis in human dermal fibroblasts.
No clinical study has reported significant adverse effects and irritation reactions are very rare from this ingredient (even at 100% concentration).
Overall, it's a fantastic ingredient for hydration and is suitable for all skin types.
This depends on the source. Squalane can be derived from both plants and animals. Most squalane used in skincare comes from plants.
Please note: the source of squalane is only known if disclosed by the brand. We recommend reaching out to the brand if you have any questions about their squalane.
Read more about squalene with an "e".
Though squalane is often called an oil, it’s technically not one. It is a hydrocarbon, meaning it is only made of carbon and hydrogen. True oils are triglycerides and made of fatty acids and glycerol.
The term “oil-free” isn’t regulated so companies can define it however they want. Some exclude all oils, while others just avoid mineral oil or comedogenic oils.
Squalane has a comedogenic rating of 1 from the original 1972 study that tested raw ingredients under occlusion on rabbit ears. This system is not standardized or peer-reviewed, and using the raw ingredients is very different from how diluted cosmetic formulations are used on human skin.
A comedogenic rating of 1 means it is "unlikely to clog pores" according to the original rating system.
The overall formula of a product matters more than the individual ingredients on whether or not it will cause clogged pores.
Learn more about SqualaneWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about WaterXanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.
On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.
Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.
Learn more about Xanthan Gum