What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningGlycerin
HumectantMyristic Acid
CleansingStearic Acid
CleansingKaolin
AbrasivePotassium Hydroxide
BufferingBentonite
AbsorbentPalmitic Acid
EmollientLauric Acid
CleansingGlyceryl Stearate
EmollientCoco-Glucoside
CleansingCI 77492
Cosmetic ColorantPolyquaternium-7
Lactose
HumectantCitrus Aurantium Dulcis Peel Oil
MaskingCellulose
AbsorbentArachidic Acid
CleansingSodium Cocoyl Isethionate
CleansingCitrus Grandis Peel Oil
MaskingDisodium EDTA
Eucalyptus Globulus Leaf Oil
PerfumingLavandula Angustifolia Oil
MaskingOleic Acid
Emollient1,2-Hexanediol
Skin ConditioningSodium Benzoate
MaskingQuillaja Saponaria Bark Extract
CleansingHydroxypropyl Methylcellulose
Emulsion StabilisingTocopheryl Acetate
AntioxidantCitric Acid
BufferingHippophae Rhamnoides Water
MaskingEthylhexylglycerin
Skin ConditioningAscorbic Acid
Antioxidant3-O-Ethyl Ascorbic Acid
Skin ConditioningAllantoin
Skin ConditioningGlyceryl Glucoside
HumectantCaprylic/Capric Triglyceride
MaskingButylene Glycol
HumectantHydrogenated Lecithin
EmulsifyingCeramide NP
Skin ConditioningPalmitoyl Tripeptide-5
Skin ConditioningCaprylyl Glycol
EmollientHyaluronic Acid
HumectantAcetyl Hexapeptide-8
HumectantTocopherol
AntioxidantHydrolyzed Hyaluronic Acid
HumectantSodium Hyaluronate
HumectantArbutin
AntioxidantNiacinamide
SmoothingTranexamic Acid
AstringentDipropylene Glycol
HumectantHydrolyzed Collagen
EmollientPentylene Glycol
Skin ConditioningLaurdimonium Hydroxypropyl Hydrolyzed Wheat Protein
Phytosterols
Skin ConditioningAscorbyl Glucoside
AntioxidantWater, Glycerin, Myristic Acid, Stearic Acid, Kaolin, Potassium Hydroxide, Bentonite, Palmitic Acid, Lauric Acid, Glyceryl Stearate, Coco-Glucoside, CI 77492, Polyquaternium-7, Lactose, Citrus Aurantium Dulcis Peel Oil, Cellulose, Arachidic Acid, Sodium Cocoyl Isethionate, Citrus Grandis Peel Oil, Disodium EDTA, Eucalyptus Globulus Leaf Oil, Lavandula Angustifolia Oil, Oleic Acid, 1,2-Hexanediol, Sodium Benzoate, Quillaja Saponaria Bark Extract, Hydroxypropyl Methylcellulose, Tocopheryl Acetate, Citric Acid, Hippophae Rhamnoides Water, Ethylhexylglycerin, Ascorbic Acid, 3-O-Ethyl Ascorbic Acid, Allantoin, Glyceryl Glucoside, Caprylic/Capric Triglyceride, Butylene Glycol, Hydrogenated Lecithin, Ceramide NP, Palmitoyl Tripeptide-5, Caprylyl Glycol, Hyaluronic Acid, Acetyl Hexapeptide-8, Tocopherol, Hydrolyzed Hyaluronic Acid, Sodium Hyaluronate, Arbutin, Niacinamide, Tranexamic Acid, Dipropylene Glycol, Hydrolyzed Collagen, Pentylene Glycol, Laurdimonium Hydroxypropyl Hydrolyzed Wheat Protein, Phytosterols, Ascorbyl Glucoside
Water
Skin ConditioningGlycerin
HumectantPalmitic Acid
EmollientLauric Acid
CleansingStearic Acid
CleansingPotassium Hydroxide
BufferingPEG-32
HumectantMyristic Acid
CleansingCocamidopropyl Betaine
CleansingGlyceryl Stearate
EmollientPEG-100 Stearate
SurfactantButylene Glycol
HumectantSorbitol
HumectantSodium Chloride
MaskingPhenoxyethanol
PreservativeParfum
MaskingChlorphenesin
AntimicrobialOlive Oil PEG-8 Esters
EmollientEthylhexylglycerin
Skin ConditioningCaprylyl Glycol
EmollientArachidic Acid
CleansingDisodium EDTA
Polyquaternium-7
Camellia Sinensis Leaf Extract
AntimicrobialSaponaria Officinalis Leaf Extract
AntimicrobialSodium Benzoate
MaskingAbelmoschus Esculentus Fruit Extract
Skin ConditioningMalva Sylvestris Extract
AstringentAloe Barbadensis Leaf Extract
EmollientDioscorea Villosa Root Extract
Skin ConditioningSea Water
Humectant1,2-Hexanediol
Skin ConditioningAlanine
MaskingGlutamic Acid
HumectantGlycine
BufferingSerine
MaskingThreonine
PCA
HumectantWater, Glycerin, Palmitic Acid, Lauric Acid, Stearic Acid, Potassium Hydroxide, PEG-32, Myristic Acid, Cocamidopropyl Betaine, Glyceryl Stearate, PEG-100 Stearate, Butylene Glycol, Sorbitol, Sodium Chloride, Phenoxyethanol, Parfum, Chlorphenesin, Olive Oil PEG-8 Esters, Ethylhexylglycerin, Caprylyl Glycol, Arachidic Acid, Disodium EDTA, Polyquaternium-7, Camellia Sinensis Leaf Extract, Saponaria Officinalis Leaf Extract, Sodium Benzoate, Abelmoschus Esculentus Fruit Extract, Malva Sylvestris Extract, Aloe Barbadensis Leaf Extract, Dioscorea Villosa Root Extract, Sea Water, 1,2-Hexanediol, Alanine, Glutamic Acid, Glycine, Serine, Threonine, PCA
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.Â
It is a:
- Humectant, drawing moisture into the skin
- Emollient, helping to soften skin
- Solvent, dispersing and stabilizing formulas
- Preservative booster, enhancing the antimicrobial activity of other preservativesÂ
Arachidic Acid (also known as Eicosanoic acid) is a fatty acid naturally found in peanut oil, corn oil, or cocoa butter. In cosmetics, it is an emollient, emulsifier, and cleansing ingredient.
Like other fatty acids, it functions as an emollient that helps hydrate and smooth the skin.
As an emulsifier and cleansing agent, it helps stabilize oil-in-water formulations. This also allows oils and other impurities to be easily rinsed away.
Arachidic acid is a natural component of human sebum and research has found that patients with papulopustular rosacea show reduced levels of these fatty acids compared to healthy control groups.
This ingredient may not be safe for fungal acne because it falls within the carbon chain range that Malassezia can metabolize.
Learn more about Arachidic AcidButylene Glycol (or BG) is used within cosmetic products for a few different reasons:
Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
Learn more about Butylene GlycolCaprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.
Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.
Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).
Learn more about Caprylyl GlycolDisodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.
This ingredient mainly works behind the scenes and helps with:
On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.
One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).
Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.
You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.
Learn more about Disodium EDTAEthylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Learn more about EthylhexylglycerinGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinGlyceryl Stearate is made by reacting glycerin with stearic acid (typically sourced from plant oils like palm or coconut). It's an emulsifier, emollient, and mild occlusive.
Emulsifiers help ingredients like oil and water stay mixed so your formula stays nicely blended and uniform in texture.
This ingredient is typically used in concentrations between 1-10%. Studies have found it to be non-sensitizing, non-phototoxic, and non-photoallergenic.
A close cousin of this ingredient is Glyceryl Stearate SE ("self-emulsifying"). This just has a small amount of sodium or potassium stearate added so it can emulsify without a co-emulsifier.
Since this ingredient is an ester of a C18 fatty acid, it may not be fungal acne safe. The Malassezia yeast can potentially metabolize within the C11-C24 range.
Fun fact: The human body also creates Glyceryl Stearate naturally.
Learn more about Glyceryl StearateLauric Acid is a saturated fatty acid naturally found in coconut oil, palm kernel oil, and even breast milk.
In cosmetics, it is an:
Lab studies have found that lauric acid is surprisingly good at killing acne-causing bacteria. However, these tests were done on bacteria in a petri dish and not on real skin, so we can't say for certain it works the same in a formulation on a real face.
The comedogenic rating of 4 comes from the 1972 rabbit ear model using undiluted ingredients. Comedogenicity is highly individual and one comedogenic ingredient cannot predict how a formula will behave on skin.
This ingredient is not fungal acne safe and research has confirmed Malassezia can use it as a food source.
Learn more about Lauric AcidMyristic Acid, aka tetradecanoic acid, is a naturally occurring fatty acid found in coconut oil and palm oil.
In skincare, it is an:
Research indicates that this ingredient posts a low risk of irritation and sensitization.
Since myristic acid is a C14 fatty acid, it falls within the range that Malassezia can metabolize, and therefore not fungal acne safe.
Learn more about Myristic AcidPalmitic Acid is a fatty acid naturally found in our skin and in many plant and animal sources.
In cosmetics, it is usually derived from palm oil. It serves many purposes in skincare, acting as a cleanser, emollient, and emulsifier.
Interestingly, topically applied Palmitic Acid can be elongated into longer chain fatty acids and ceramides. A 2019 study found low levels of Palmitic Acid lead to slower development of cells, suggesting it plays a role in keeping your skin's renewal process on track.
The CIR (Cosmetic Ingredient Review) panel determined it safe as used in cosmetics at concentrations up to 13%. It is non-irritating and non-sensitizing in clinical studies.
The culprit behind fungal acne, the Malassezia yeast, feeds on fatty acids with carbon chain lengths between C11-C24. Palmitic Acid, at C16, falls right into that sweet spot.
In vitro studies have shown that Palmitic Acid is one of the fatty acids that induce rapid Malassezia growth in lab settings.
It's worth noting that what feeds yeast in a lab doesn't necessarily feed it on your face since formulation and your skin's chemistry play a bigger role.
Learn more about Palmitic AcidPolyquaternium-7 is a light to clear colored liquid. It is commonly found in haircare products for its film-forming and anti-static properties.
According to a manufacturer, it is a non-paraben and specially developed for negatively charged surfactant systems. This makes it a great hairstyle holder and helps to improve wet hair detangling without adding buildup.
Potassium hydroxide is commonly known as caustic potash. It is used to fix the pH of a product or as a cleaning agent in soap. In cleansers, it is used for the saponification of oils.
Sapnification is the process of creating fatty acid metal salts from triglycerides and a strong base. During this process, Potassium Hydroxide is used up and is not present in the final product.
Using high concentrations of Potassium Hydroxide have shown to irritate the skin.
Learn more about Potassium HydroxideSodium Benzoate is a preservative. It's used in both cosmetic and food products to inhibit the growth of mold and bacteria. It is typically produced synthetically.
Both the US FDA and EU Health Committee have approved the use of sodium benzoate. In the US, levels of 0.1% (of the total product) are allowed.
Sodium benzoate works as a preservative by inhibiting the growth of bacteria inside of cells. It prevents the cell from fermenting a type of sugar using an enzyme called phosphofructokinase.
It is the salt of benzoic acid. Foods containing sodium benzoate include soda, salad dressings, condiments, fruit juices, wines, and snack foods.
Studies for using ascorbic acid and sodium benzoate in cosmetics are lacking, especially in skincare routines with multiple steps.
We always recommend speaking with a professional, such as a dermatologist, if you have any concerns.
Learn more about Sodium BenzoateStearic Acid is a fatty acid that is already found in your skin. It's one of the free fatty acids that works alongside ceramides and cholesterols to maintain your barrier.
In cosmetics, it is a multitasker:
Safety-wise, the CIR Expert Panel has concluded it to be safe in cosmetics when formulated to be non-irritating and non-sensitizing.
Free stearic acid is a C18 fatty acid that the Malassezia yeast can substrate, so this ingredient may not be fungal acne safe.
Learn more about Stearic AcidWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water