What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Phenylbenzimidazole Sulfonic Acid 2.7%
UV AbsorberDimethicone
EmollientWater
Skin ConditioningIsododecane
EmollientAlcohol Denat.
AntimicrobialTrimethylsiloxysilicate
EmollientPropylene Glycol
HumectantPEG/PPG-18/18 Dimethicone
EmulsifyingGlycerin
HumectantNiacinamide
SmoothingSilica
AbrasiveSynthetic Fluorphlogopite
Polysilicone-11
Hydroxyethylpiperazine Ethane Sulfonic Acid
BufferingSodium Chloride
MaskingPhenoxyethanol
PreservativePEG-10 Dimethicone
Skin ConditioningSilica Silylate
EmollientSodium Hydroxide
BufferingDisodium Stearoyl Glutamate
CleansingTocopherol
AntioxidantParfum
MaskingAlpha-Glucan Oligosaccharide
CleansingAluminum Hydroxide
EmollientPolymnia Sonchifolia Root Juice
Skin ConditioningLimonene
PerfumingMaltodextrin
AbsorbentAlpha-Isomethyl Ionone
PerfumingLactobacillus
Skin ConditioningGeraniol
PerfumingCitronellol
PerfumingCitric Acid
BufferingTitanium Dioxide
Cosmetic ColorantIron Oxides
Phenylbenzimidazole Sulfonic Acid 2.7%, Dimethicone, Water, Isododecane, Alcohol Denat., Trimethylsiloxysilicate, Propylene Glycol, PEG/PPG-18/18 Dimethicone, Glycerin, Niacinamide, Silica, Synthetic Fluorphlogopite, Polysilicone-11, Hydroxyethylpiperazine Ethane Sulfonic Acid, Sodium Chloride, Phenoxyethanol, PEG-10 Dimethicone, Silica Silylate, Sodium Hydroxide, Disodium Stearoyl Glutamate, Tocopherol, Parfum, Alpha-Glucan Oligosaccharide, Aluminum Hydroxide, Polymnia Sonchifolia Root Juice, Limonene, Maltodextrin, Alpha-Isomethyl Ionone, Lactobacillus, Geraniol, Citronellol, Citric Acid, Titanium Dioxide, Iron Oxides
Cyclohexasiloxane
EmollientWater
Skin ConditioningTrimethylsiloxysilicate
EmollientEthylhexyl Methoxycinnamate
UV AbsorberPEG-10 Dimethicone
Skin ConditioningTitanium Dioxide
Cosmetic ColorantButylene Glycol
HumectantDimethicone
EmollientPhenyl Trimethicone
Skin ConditioningPEG/PPG-18/18 Dimethicone
EmulsifyingGlycerin
HumectantCyclopentasiloxane
Emollient1,2-Hexanediol
Skin ConditioningAlcohol Denat.
AntimicrobialAloe Barbadensis Leaf Juice
Skin ConditioningAlumina
AbrasiveCaprylyl Glycol
EmollientCarbomer
Emulsion StabilisingCentaurea Cyanus Flower Extract
AstringentCeramide AP
Skin ConditioningCeramide EOP
Skin ConditioningCeramide NP
Skin ConditioningChamomilla Recutita Flower Extract
MaskingCholesterol
EmollientCucumis Sativus Seed Extract
Skin ConditioningCymbidium Grandiflorum Flower Extract
Skin ConditioningDimethicone/Silsesquioxane Copolymer
Dimethiconol
EmollientDisteardimonium Hectorite
StabilisingHexylene Glycol
EmulsifyingHibiscus Sabdariffa Flower Extract
Skin ConditioningHydrogen Dimethicone
Lactobacillus/Eriodictyon Californicum Ferment Extract
Skin ConditioningLavandula Angustifolia Flower Extract
CleansingLecithin
EmollientLilium Candidum Bulb Extract
Skin ConditioningMagnesium Sulfate
Maltodextrin
AbsorbentMalva Sylvestris Extract
AstringentMaris Sal
Skin ConditioningMethicone
EmollientMica
Cosmetic ColorantMorus Alba Bark Extract
Skin ConditioningNelumbo Nucifera Flower Extract
Skin ConditioningNymphaea Alba Flower Extract
Skin ConditioningPhytosphingosine
Skin ConditioningPolyquaternium-51
Skin ConditioningPolysilicone-11
Pullulan
Sclerotium Gum
Emulsion StabilisingSerica
HumectantSilica
AbrasiveSodium Carrageenan
Emulsion StabilisingSodium Hyaluronate
HumectantSodium Lauroyl Lactylate
EmulsifyingSodium PCA
HumectantTetrahexyldecyl Ascorbate
AntioxidantTetrasodium EDTA
Tocopheryl Acetate
AntioxidantTrehalose
HumectantTriethoxycaprylylsilane
Triethyl Citrate
MaskingUrea
BufferingXanthan Gum
EmulsifyingZinc Oxide
Cosmetic ColorantPhenoxyethanol
PreservativeCyclohexasiloxane, Water, Trimethylsiloxysilicate, Ethylhexyl Methoxycinnamate, PEG-10 Dimethicone, Titanium Dioxide, Butylene Glycol, Dimethicone, Phenyl Trimethicone, PEG/PPG-18/18 Dimethicone, Glycerin, Cyclopentasiloxane, 1,2-Hexanediol, Alcohol Denat., Aloe Barbadensis Leaf Juice, Alumina, Caprylyl Glycol, Carbomer, Centaurea Cyanus Flower Extract, Ceramide AP, Ceramide EOP, Ceramide NP, Chamomilla Recutita Flower Extract, Cholesterol, Cucumis Sativus Seed Extract, Cymbidium Grandiflorum Flower Extract, Dimethicone/Silsesquioxane Copolymer, Dimethiconol, Disteardimonium Hectorite, Hexylene Glycol, Hibiscus Sabdariffa Flower Extract, Hydrogen Dimethicone, Lactobacillus/Eriodictyon Californicum Ferment Extract, Lavandula Angustifolia Flower Extract, Lecithin, Lilium Candidum Bulb Extract, Magnesium Sulfate, Maltodextrin, Malva Sylvestris Extract, Maris Sal, Methicone, Mica, Morus Alba Bark Extract, Nelumbo Nucifera Flower Extract, Nymphaea Alba Flower Extract, Phytosphingosine, Polyquaternium-51, Polysilicone-11, Pullulan, Sclerotium Gum, Serica, Silica, Sodium Carrageenan, Sodium Hyaluronate, Sodium Lauroyl Lactylate, Sodium PCA, Tetrahexyldecyl Ascorbate, Tetrasodium EDTA, Tocopheryl Acetate, Trehalose, Triethoxycaprylylsilane, Triethyl Citrate, Urea, Xanthan Gum, Zinc Oxide, Phenoxyethanol
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Alcohol Denat. is an alcohol with a denaturant property. It is created by mixing ethanol with other additives.
This ingredient gets a bad rep because it is irritating and drying - mostly due to its astringent property. Astringents draw out natural oils in tissue, constricting pores and leaving your skin dried out.
However, alcohol denat. is not all that bad.
Due to its low molecular weight, alcohol denat. tends to evaporate quickly. One study on pig skin found half of applied alcohol evaporated in 10 seconds and less than 3% stayed on skin.
This also helps other ingredients become better absorbed upon application.
Studies are conflicted about whether this ingredient causes skin dehydration. One study from 2005 found adding emollients to propanol-based sanitizer decreased skin dryness and irritation. Another study found irritation only occurs if your skin is already damaged.
Small amounts of alcohol are generally tolerated by oily skin or people who live in humid environments.
The rule of thumb is if this alcohol is near the end of an ingredients list, it will probably not affect your skin much.
Also...
This ingredient has antimicrobial and solvent properties.
The antimicrobial property helps preserve products and increase their shelf life. As a solvent, it helps dissolve other ingredients.
Other types of astringent alcohols include:
Learn more about Alcohol Denat.Dimethicone is a type of synthetic silicone created from natural materials such as quartz.
What it does:
Dimethicone comes in different viscosities:
Depending on the viscosity, dimethicone has different properties.
Ingredients lists don't always show which type is used, so we recommend reaching out to the brand if you have questions about the viscosity.
This ingredient is unlikely to cause irritation because it does not get absorbed into skin. However, people with silicone allergies should be careful about using this ingredient.
Note: Dimethicone may contribute to pilling. This is because it is not oil or water soluble, so pilling may occur when layered with products. When mixed with heavy oils in a formula, the outcome is also quite greasy.
Learn more about DimethiconeGlycerin is already naturally found in your skin. It helps moisturize and protect your skin.
A study from 2016 found glycerin to be more effective as a humectant than AHAs and hyaluronic acid.
As a humectant, it helps the skin stay hydrated by pulling moisture to your skin. The low molecular weight of glycerin allows it to pull moisture into the deeper layers of your skin.
Hydrated skin improves your skin barrier; Your skin barrier helps protect against irritants and bacteria.
Glycerin has also been found to have antimicrobial and antiviral properties. Due to these properties, glycerin is often used in wound and burn treatments.
In cosmetics, glycerin is usually derived from plants such as soybean or palm. However, it can also be sourced from animals, such as tallow or animal fat.
This ingredient is organic, colorless, odorless, and non-toxic.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinMaltodextrin is a polysaccharide. It is derived from starch such as rice, corn, wheat, or potato starch.
In food, Maltodextrin is used to improve the texture and thicken a product. Due to its structure, it can help create a gel texture. As an emulsion stabilizer, it helps keep the ingredients in a product together.
As a polysaccharide, Maltodextrin has moisturizing properties. Polysaccharides are a type of carbohydrate. The top layer of skin uses polysaccharides to retain water, keeping the skin hydrated.
Maltodextrin is water soluble and has a sweet taste.
Learn more about MaltodextrinPeg-10 Dimethicone is silicone with conditioner and emulsifier properties. It mostly acts as an emollient in skincare and and humectant in haircare.
According to the manufacturer, acidic formulations decrease the stability of this ingredient. It works best in neutral or near neutral formulations.
PEG/PPG-18/18 Dimethicone is a type of silicone.
Phenoxyethanol is a preservative that has germicide, antimicrobial, and aromatic properties. Studies show that phenoxyethanol can prevent microbial growth. By itself, it has a scent that is similar to that of a rose.
It's often used in formulations along with Caprylyl Glycol to preserve the shelf life of products.
Polysilicone-11 is a film-forming silicone that creates a non-tacky and matte finish on the skin. It's commonly used to improve texture, absorb excess oil, and help active ingredients spread evenly.
Due to its "rubber-like" structure, it stays on the skin's surface instead of being absorbed. On the skin, it creates a flexible layer that enhances wearability and stability.
Silica, also known as silicon dioxide, is a naturally occurring mineral. It is used as a fine, spherical, and porous powder in cosmetics.
Though it has exfoliant properties, the function of silica varies depending on the product.
The unique structure of silica enhances the spreadability and adds smoothness, making it a great texture enhancer.
It is also used as an active carrier, emulsifier, and mattifier due to its ability to absorb excess oil.
In some products, tiny microneedles called spicules are made from silica or hydrolyzed sponge. When you rub them in, they lightly polish away dead skin layers and enhance the penetration of active ingredients.
Learn more about SilicaTitanium dioxide is a mineral UV filter widely used in sunscreens and cosmetics.
It is one of only two UV filters officially classified as âmineralâ by regulatory agencies, the other being zinc oxide.
Titanium dioxide provides broad-spectrum protection mostly in the UVB and UVAII range, with some protection in the UVAI range.
While its UVA protection isnât as strong as zinc oxideâs, the difference is minor.
A common myth is that mineral UV filters reflect UV light. However, modern research shows titanium dioxide absorbs UV radiation like chemical filters (~95% absorption & 5% reflection).
Thanks to its non-irritating nature, titanium dioxide is suitable for sensitive, acne-prone, or redness-prone skin. It is unlikely to cause "eye sting" like other sunscreen ingredients.
A major drawback of this ingredient is its white cast and thick texture. This is why mineral sunscreens often leave a white cast and are less cosmetically elegant than chemical/hybrid sunscreens.
To improve white cast and spreadability, micronized or nano-sized titanium dioxide is often used.
There are ongoing concerns surrounding nano-titanium oxide's impact on marine ecosystems.
There is no conclusive evidence that any form of titanium oxide (or any other sunscreen ingredients) will cause harm to marine ecosystems or coral reefs. The science is still developing but many consumers are keeping a close eye on this issue.
Please note, many destinations have reef-safety sunscreen rules. For instance, the U.S. Virgin Islands advises all visitors to use non-nano mineral sunscreens.
Nano mineral sunscreens once raised safety concerns about absorption into skin.
Extensive research has shown that they do not penetrate healthy or damaged skin; they remain safely on the surface and the top layer of dead skin (stratum corneum).
You'll likely find titanium dioxide bundled with alumina, silica, or dimethicone. These ingredients help make titanium dioxide highly photostable; this prevents it from interacting with other formula components under UV light.
Learn more about Titanium DioxideThis silicone is an emollient. Emollients create a thin film on the skin to prevent moisture from escaping.
It is not soluble in water and helps increase water-resistance in products.
According to a manufacturer, it can blend seamlessly with silicone oils, such as Cyclopentasiloxane.
Learn more about TrimethylsiloxysilicateWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Stay hydrated!
Learn more about Water