Skintegra Retiron 0.05 Versus Theramid A-Retinoate
What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningPentylene Glycol
Skin ConditioningCaprylic/Capric Triglyceride
MaskingCaprylyl Caprylate/Caprate
EmollientGlycerin
HumectantCaprylic/Capric/Succinic Triglyceride
EmollientIsopentyldiol
HumectantDimethicone
EmollientPolyglyceryl-6 Stearate
EmollientMethyl Gluceth-20
HumectantNiacinamide
SmoothingCeramide NP
Skin ConditioningCeramide AP
Skin ConditioningLactobacillus Ferment Lysate
Skin ConditioningPanthenol
Skin ConditioningCeramide EOP
Skin ConditioningPolyglyceryl-6 Behenate
Emulsion StabilisingBehenyl Alcohol
EmollientPhytosphingosine
Skin ConditioningBisabolol
AntioxidantMadecassoside
AntioxidantTocopherol
AntioxidantArachidyl Glucoside
EmulsifyingPolyglyceryl-6 Laurate
EmulsifyingSodium Hyaluronate
HumectantCyclodextrin
AbsorbentCetearyl Olivate
Helianthus Annuus Seed Oil
EmollientRetinal
Skin ConditioningPolyglycerin-6
HumectantLeuconostoc/Radish Root Ferment Filtrate
AntimicrobialLonicera Japonica Flower Extract
Skin ConditioningLonicera Caprifolium Flower Extract
PerfumingCholesterol
EmollientSorbitan Oleate
EmulsifyingGlycine Max Oil
EmollientRubus Chamaemorus Seed Oil
Skin ConditioningSorbitan Isostearate
EmulsifyingSodium Hydroxide
BufferingPhenoxyethanol
PreservativeSodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Emulsion StabilisingXanthan Gum
EmulsifyingCarbomer
Emulsion StabilisingSodium Lauroyl Lactylate
EmulsifyingBHT
AntioxidantSorbitan Olivate
EmulsifyingArachidyl Alcohol
EmollientC15-19 Alkane
SolventEthylhexylglycerin
Skin ConditioningWater, Pentylene Glycol, Caprylic/Capric Triglyceride, Caprylyl Caprylate/Caprate, Glycerin, Caprylic/Capric/Succinic Triglyceride, Isopentyldiol, Dimethicone, Polyglyceryl-6 Stearate, Methyl Gluceth-20, Niacinamide, Ceramide NP, Ceramide AP, Lactobacillus Ferment Lysate, Panthenol, Ceramide EOP, Polyglyceryl-6 Behenate, Behenyl Alcohol, Phytosphingosine, Bisabolol, Madecassoside, Tocopherol, Arachidyl Glucoside, Polyglyceryl-6 Laurate, Sodium Hyaluronate, Cyclodextrin, Cetearyl Olivate, Helianthus Annuus Seed Oil, Retinal, Polyglycerin-6, Leuconostoc/Radish Root Ferment Filtrate, Lonicera Japonica Flower Extract, Lonicera Caprifolium Flower Extract, Cholesterol, Sorbitan Oleate, Glycine Max Oil, Rubus Chamaemorus Seed Oil, Sorbitan Isostearate, Sodium Hydroxide, Phenoxyethanol, Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Xanthan Gum, Carbomer, Sodium Lauroyl Lactylate, BHT, Sorbitan Olivate, Arachidyl Alcohol, C15-19 Alkane, Ethylhexylglycerin
Water
Skin ConditioningCaprylic/Capric Triglyceride
MaskingCoco-Caprylate
EmollientGlycerin
HumectantDimethicone
EmollientTribehenin PEG-20 Esters
EmollientSilica
AbrasiveCoco-Caprylate/Caprate
EmollientBetaine
HumectantPanthenol
Skin ConditioningCetearyl Alcohol
EmollientPPG-13-Decyltetradeceth-24
EmulsifyingRetinal
Skin ConditioningRetinyl Retinoate
Skin ConditioningSodium Retinoyl Hyaluronate
Jojoba Esters
EmollientHelianthus Annuus Seed Wax
Skin ConditioningDimethicone/Vinyl Dimethicone Crosspolymer
Skin ConditioningCarbomer
Emulsion StabilisingButylene Glycol
HumectantMannitol
HumectantPhosphatidylcholine
EmulsifyingIsopropyl Lauroyl Sarcosinate
Skin ConditioningPotassium Cetyl Phosphate
EmulsifyingCetyl Alcohol
EmollientAcacia Decurrens Flower Wax
EmollientPolyglycerin-3
HumectantDiethylhexyl Syringylidenemalonate
Skin ProtectingBenzotriazolyl Dodecyl P-Cresol
UV AbsorberXanthan Gum
EmulsifyingTocopherol
AntioxidantPhosphoric Acid
BufferingCitric Acid
BufferingEthylhexylglycerin
Skin ConditioningSodium Benzoate
MaskingPotassium Sorbate
PreservativeSodium Chloride
MaskingPhenoxyethanol
PreservativeSodium Hydroxide
BufferingWater, Caprylic/Capric Triglyceride, Coco-Caprylate, Glycerin, Dimethicone, Tribehenin PEG-20 Esters, Silica, Coco-Caprylate/Caprate, Betaine, Panthenol, Cetearyl Alcohol, PPG-13-Decyltetradeceth-24, Retinal, Retinyl Retinoate, Sodium Retinoyl Hyaluronate, Jojoba Esters, Helianthus Annuus Seed Wax, Dimethicone/Vinyl Dimethicone Crosspolymer, Carbomer, Butylene Glycol, Mannitol, Phosphatidylcholine, Isopropyl Lauroyl Sarcosinate, Potassium Cetyl Phosphate, Cetyl Alcohol, Acacia Decurrens Flower Wax, Polyglycerin-3, Diethylhexyl Syringylidenemalonate, Benzotriazolyl Dodecyl P-Cresol, Xanthan Gum, Tocopherol, Phosphoric Acid, Citric Acid, Ethylhexylglycerin, Sodium Benzoate, Potassium Sorbate, Sodium Chloride, Phenoxyethanol, Sodium Hydroxide
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
This ingredient is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping the skin prevent moisture loss.
It helps thicken a product's formula and makes it easier to spread by dissolving clumping compounds.
Caprylic Triglyceride is made by combining glycerin with coconut oil, forming a clear liquid. Though it behaves like an oil, it is not technically one due to its chemical composition. It is very stable, resistant to oxidation, and unlikely to go rancid. In practice, that translates to a long shelf life and a consistently elegant skin feel.
While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Be sure to patch test if you have concerns.
Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.
Learn more about Caprylic/Capric TriglycerideCarbomer is a high-molecular weight polymer of acrylic acid. It is used to form gels and thicken formulas.
Due to its large molecular size, carbomer has minimal skin penetration and is considered an inert ingredient.
A high amount of carbomer can cause pilling or balling up of products. Don't worry, most products contain 1% or less of carbomer.
Learn more about CarbomerDimethicone is a type of synthetic silicone created from natural materials such as quartz. It is also known as polydimethylsiloxane.
What it does:
Dimethicone comes in different viscosities:
Depending on the viscosity, dimethicone has different properties.
Ingredients lists don't always show which type is used, so we recommend reaching out to the brand if you have questions about the viscosity.
This ingredient is unlikely to cause irritation because it does not get absorbed into skin. However, people with silicone allergies should be careful about using this ingredient.
Note: Dimethicone may contribute to pilling. This is because it is not oil or water soluble, so pilling may occur when layered with products. When mixed with heavy oils in a formula, the outcome is also quite greasy.
Learn more about DimethiconeEthylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Learn more about EthylhexylglycerinGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinPanthenol is a common ingredient that helps hydrate and soothe the skin. It is found naturally in our skin and hair.
There are two forms of panthenol: D and L.
D-panthenol is also known as dexpanthenol. Most cosmetics use dexpanthenol or a mixture of D and L-panthenol.
Panthenol is famous due to its ability to go deeper into the skin's layers. Using this ingredient has numerous pros (and no cons):
Like hyaluronic acid, panthenol is a humectant. Humectants are able to bind and hold large amounts of water to keep skin hydrated.
This ingredient works well for wound healing. It works by increasing tissue in the wound and helps close open wounds.
Once oxidized, panthenol converts to pantothenic acid. Panthothenic acid is found in all living cells.
This ingredient is also referred to as pro-vitamin B5.
Learn more about PanthenolPhenoxyethanol is a preservative that has germicide, antimicrobial, and aromatic properties. Studies show that phenoxyethanol can prevent microbial growth. By itself, it has a scent that is similar to that of a rose.
It's often used in formulations along with Caprylyl Glycol to preserve the shelf life of products.
Retinal is a form of retinoid. Retinoids are the gold-standard class of anti-aging ingredients.
Retinal has many benefits as other retinoids: improve skin texture, reduce large pores, reduce the effects of aging, reduce the visibility of dark spots, heal scars, and fight acne.
Studies show retinal may work at a faster rate than retinol due to its structure.
All retinoids have to be converted into retinoic acid before starting to work. Some retinoids take several steps of conversion before binding. Retinal is only one step away, making it more potent.
Like other retinoids, retinal may be irritating. It is best to ease into using this ingredient frequently.
Using the 'ramp up' method, start by using retinol once a week. This gives your skin time to adjust and decrease irritation. Once you feel ready, you can slowly increase the frequency of retinol use.
Using retinoids will increase sun-sensitivity in the first few weeks of use. Though studies show retinoids increase your skin's natural SPF with continuous use, it is best to always wear sunscreen and sun-protection.
Learn more about RetinalSodium Hydroxide is also known as lye or caustic soda. It is used to adjust the pH of products; many ingredients require a specific pH to be effective.
In small amounts, sodium hydroxide is considered safe to use. However, large amounts may cause chemical burns due to its high alkaline.
Your skin has a natural pH and acid mantle. This acid mantle helps prevent harmful bacteria from breaking through. The acid mantle also helps keep your skin hydrated.
"Alkaline" refers to a high pH level. A low pH level would be considered acidic.
Learn more about Sodium HydroxideTocopherol (also known as Vitamin E) is a common antioxidant used to help protect the skin from free-radicals and strengthen the skin barrier. It's also fat soluble - this means our skin is great at absorbing it.
Vitamin E also helps keep your natural skin lipids healthy. Your lipid skin barrier naturally consists of lipids, ceramides, and fatty acids. Vitamin E offers extra protection for your skin’s lipid barrier, keeping your skin healthy and nourished.
Another benefit is a bit of UV protection. Vitamin E helps reduce the damage caused by UVB rays. (It should not replace your sunscreen). Combining it with Vitamin C can decrease sunburned cells and hyperpigmentation after UV exposure.
You might have noticed Vitamin E + C often paired together. This is because it is great at stabilizing Vitamin C. Using the two together helps increase the effectiveness of both ingredients.
There are often claims that Vitamin E can reduce/prevent scarring, but these claims haven't been confirmed by scientific research.
Learn more about TocopherolWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about WaterXanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.
On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.
Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.
Learn more about Xanthan Gum