This brightening treatment is formulated around Niacinamide and Ascorbic Acid to brighten dull-looking skin and refine skin texture.
This brightening serum is formulated around Ascorbyl Tetraisopalmitate and Ferulic Acid to fade the look of dark spots and brighten dull-looking skin.
What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningDipropylene Glycol
HumectantGlycerin
HumectantNiacinamide
SmoothingPolyglycerin-3
HumectantCaprylic/Capric Triglyceride
Masking1,2-Hexanediol
Skin ConditioningBetaine
HumectantSodium Carbomer
Emulsion StabilisingAmmonium Acryloyldimethyltaurate/Vp Copolymer
Silica
AbrasiveEthylhexylglycerin
Skin ConditioningAcrylates/C10-30 Alkyl Acrylate Crosspolymer
Emulsion StabilisingC12-14 Alketh-12
EmulsifyingHydroxyethylcellulose
Emulsion StabilisingHydroxyacetophenone
AntioxidantCaprylyl Glycol
EmollientAdenosine
Skin ConditioningTromethamine
BufferingButylene Glycol
HumectantMelia Azadirachta Leaf Extract
Skin ConditioningDisodium EDTA
Melia Azadirachta Flower Extract
Skin ConditioningCyamopsis Tetragonoloba Gum
Emulsion StabilisingCurcuma Longa Root Extract
AntioxidantAgar
MaskingXanthan Gum
EmulsifyingUbiquinone
AntioxidantCentella Asiatica Extract
CleansingOcimum Sanctum Leaf Extract
Skin ConditioningTocopherol
AntioxidantAscorbic Acid
AntioxidantHydrogenated Polydecene
EmollientHippophae Rhamnoides Fruit Oil
Skin ProtectingGlutathione
Hippophae Rhamnoides Water
MaskingPropanediol
SolventCorallina Officinalis Extract
Skin ConditioningPolyglyceryl-10 Laurate
Skin ConditioningAstaxanthin
Skin ConditioningHydrogenated Phosphatidylcholine
EmulsifyingDisodium Phosphate
BufferingPolysorbate 60
EmulsifyingRetinyl Palmitate
Skin ConditioningEriobotrya Japonica Leaf Extract
Skin ConditioningSodium Phosphate
BufferingSodium Lauroyl Glutamate
SurfactantMentha Viridis Extract
MaskingSodium Hyaluronate
HumectantPropolis Extract
Skin ConditioningFerulic Acid
AntimicrobialAsiaticoside
AntioxidantAsiatic Acid
Skin ConditioningMadecassic Acid
Skin ConditioningMadecassoside
AntioxidantWater, Dipropylene Glycol, Glycerin, Niacinamide, Polyglycerin-3, Caprylic/Capric Triglyceride, 1,2-Hexanediol, Betaine, Sodium Carbomer, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Silica, Ethylhexylglycerin, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, C12-14 Alketh-12, Hydroxyethylcellulose, Hydroxyacetophenone, Caprylyl Glycol, Adenosine, Tromethamine, Butylene Glycol, Melia Azadirachta Leaf Extract, Disodium EDTA, Melia Azadirachta Flower Extract, Cyamopsis Tetragonoloba Gum, Curcuma Longa Root Extract, Agar, Xanthan Gum, Ubiquinone, Centella Asiatica Extract, Ocimum Sanctum Leaf Extract, Tocopherol, Ascorbic Acid, Hydrogenated Polydecene, Hippophae Rhamnoides Fruit Oil, Glutathione, Hippophae Rhamnoides Water, Propanediol, Corallina Officinalis Extract, Polyglyceryl-10 Laurate, Astaxanthin, Hydrogenated Phosphatidylcholine, Disodium Phosphate, Polysorbate 60, Retinyl Palmitate, Eriobotrya Japonica Leaf Extract, Sodium Phosphate, Sodium Lauroyl Glutamate, Mentha Viridis Extract, Sodium Hyaluronate, Propolis Extract, Ferulic Acid, Asiaticoside, Asiatic Acid, Madecassic Acid, Madecassoside
Water
Skin ConditioningPropanediol
SolventPEG-40 Hydrogenated Castor Oil
EmulsifyingEthoxydiglycol
HumectantAscorbyl Tetraisopalmitate
AntioxidantPhenoxyethanol
PreservativeSargassum Filipendula Extract
Skin ProtectingHypnea Musciformis Extract
Skin ProtectingXanthan Gum
EmulsifyingFerulic Acid
AntimicrobialHydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Emulsion StabilisingSodium
Glycerin
HumectantSodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Emulsion StabilisingSclerotium Gum
Emulsion StabilisingLecithin
EmollientIsohexadecane
EmollientPullulan
Zinc Gluconate
Skin ConditioningCaprylyl Glycol
EmollientSorbitol
HumectantSodium Hyaluronate
HumectantPolysorbate 60
EmulsifyingEpigallocatechin Gallatyl Glucoside
AntioxidantAscorbic Acid
AntioxidantSorbitan Isostearate
EmulsifyingSilica
Abrasive1,2-Hexanediol
Skin ConditioningEthylhexylglycerin
Skin ConditioningSodium Benzoate
MaskingPotassium Sorbate
PreservativeGold
Cosmetic ColorantGlutathione
Water, Propanediol, PEG-40 Hydrogenated Castor Oil, Ethoxydiglycol, Ascorbyl Tetraisopalmitate, Phenoxyethanol, Sargassum Filipendula Extract, Hypnea Musciformis Extract, Xanthan Gum, Ferulic Acid, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Sodium, Glycerin, Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Sclerotium Gum, Lecithin, Isohexadecane, Pullulan, Zinc Gluconate, Caprylyl Glycol, Sorbitol, Sodium Hyaluronate, Polysorbate 60, Epigallocatechin Gallatyl Glucoside, Ascorbic Acid, Sorbitan Isostearate, Silica, 1,2-Hexanediol, Ethylhexylglycerin, Sodium Benzoate, Potassium Sorbate, Gold, Glutathione
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.
It is a:
- Humectant, drawing moisture into the skin
- Emollient, helping to soften skin
- Solvent, dispersing and stabilizing formulas
- Preservative booster, enhancing the antimicrobial activity of other preservatives
Ascorbic Acid is is pure Vitamin C and is the biologically active form used directly by skin.
Not only is vitamin C great for your overall health and immune system, but it also has plenty of benefits for your skin. It is best supported by academic literature for:
Topical vitamin C has been shown to help neutralize oxidative stress from UV and pollution, helping to improve photoaging and hyperpigmentation when used consistently.
One clinical study found that using 5% topical vitamin C for six months improved signs of photodamaged skin, both on the surface and in the deeper structural layers of the skin.
While vitamin C doesn’t replace sunscreen, studies show it can boost photoprotection when combined with Vitamin E and ferulic acid. These two ingredients help improve stability and protective effects.
The big downside of this ingredient is formulation difficulty. Vitamin C is prone to oxidation and doesn't penetrate the skin unless formulated correctly. Research found that vitamin C absorbs into the skin best at a low pH (< 3.5) with about 20% being the upper limit for effective absorption.
Skin levels can saturate after repeated application; this means your skin won’t keep absorbing more once it’s full of vitamin C. This is why more isn’t always better with vitamin C and why very high concentrations don’t necessarily give extra benefits.
Ascorbic acid generally works well with many skincare ingredients but can be irritating when combined with other active ingredients. Strong oxidizing acne treatments like benzoyl peroxide can reduce the effectiveness of vitamin C if they are used at the same time; they are often recommended for use at different times of day.
Read more about other types of Vitamin C:
Foods rich with vitamin C include oranges, strawberries, broccoli, bell peppers, and more. When consuming Vitamin C, your skin receives a portion of the nutrients.
Learn more about Ascorbic AcidCaprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.
Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.
Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).
Learn more about Caprylyl GlycolEthylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Learn more about EthylhexylglycerinFerulic Acid is a plant based antioxidant that can be naturally found in the cell walls of grains like rice, oats, and corn. It has antioxidant and antimicrobial properties, and has the ability to boost the performance of other antioxidants as well.
A well-known study found that adding Ferulic Acid to a solution of Vitamins C and E doubled the photoprotection of skin. This is why you'll often see it paired with Vitamin C or Vitamin E serums rather than sold on its own.
A 2025 review of 18 human studies found that using Ferulic Acid (0.5-1%) daily for one to three months showed improvements in:
As far as allergies go, Ferulic acid is generally well-tolerated but can cause an allergic reaction in very rare cases. It's also worth noting that Ferulic acid is often extracted from plant sources like rice bran or wheat bran, so be sure to path test if you have known grain allergies.
Outside of skincare, researchers are also looking into Ferulic Acid for its potential benefits in areas like diabetes, Alzheimer's, and heart health.
Learn more about Ferulic AcidGlutathione is a tiny protein-like molecule (a "tripeptide" build from 3 amino acids: glycine, cysteine, and glutamic acid) that your body already makes on its own.
Inside your body, it acts as one of the skin's main antioxidants that help fight against free radicals.
In skincare, it's best known as a brightening ingredient that slows down tyrosinase, the key enzyme that makes skin pigment. It also nudges the skin toward making a lighter type of pigment instead of a darker one.
This is why you'll see it in products aimed at dark spots and uneven tone.
A small number of real human trials have found a topical glutathione lotion:
The honest caveat is that the current evidence is still thin (few studies, small groups, short timelines). Glutathione also doesn't absorb into skin very easily so results tend to be modest and fade if you stop using it.
One thing worth clearing up:
The scary side effects you may have heard about come from glutathione injected intravenously, which has real safety concerns. Applying it topically is a completely different thing and has a clean track record.
Most human studies used it around 2% (as Glutathione or Glutathione Disulfide) and a 2% oxidized glutathione lotion and a 2% S-acyl glutathione cream are the concentrations with actual clinical data behind them.
There's no established "ideal" percentage yet but 1-2% is the evidence-backed range.
Allergy-wise, there is very low risk for this ingredient; it was well-tolerated across the topical trials. Only one participant had mild temporary redness that cleared up on its own and another study reported no adverse reactions at all.
One trial had ~10% of users drop out for irritation was using a combination cream that also had 10% azelaic acid so the irritation likely wasn't from the glutathione. There's no notable contact-allergy signal for topical glutathione in the literature but patch-testing before first use is still sensible for those with sensitive skin.
Learn more about GlutathioneGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinPolysorbate 60 is used to help stabilize products. It is a surfactant and emulsifier. These properties help keep ingredients together in a product. Surfactants help reduce surface tension between ingredients with different states, such as liquids and solids. Emulsifiers help prevent oils and waters from separating.
Polysorbate 60 is sorbitol-based and created from the ethoxylation of sorbitan. Ethoxylation is a chemical reaction used to add ethylene oxide. Sorbitan is a the dehydrated version of sorbitol, a sugar found in fruits.
In this case, the 60 comes from reacting 60 units of ethylene oxide with sorbitan.
Polysorbates are commonly used in medicine and foods.
Learn more about Polysorbate 60Propanediol is an all-star ingredient. It softens, hydrates, and smooths the skin.
It’s often used to:
Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.
Learn more about PropanediolSilica, also known as silicon dioxide, is a naturally occurring mineral. It is used as a fine, spherical, and porous powder in cosmetics.
Though it has exfoliant properties, the function of silica varies depending on the product.
The unique structure of silica enhances the spreadability and adds smoothness, making it a great texture enhancer.
It is also used as an active carrier, emulsifier, and mattifier due to its ability to absorb excess oil.
In some products, tiny microneedles called spicules are made from silica or hydrolyzed sponge. When you rub them in, they lightly polish away dead skin layers and enhance the penetration of active ingredients.
Learn more about SilicaSodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.
In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.
Interestingly, the size of the molecule affects its behavior:
Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.
Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.
You'll typically see concentrations between 0.1-2% for this ingredient.
Learn more about Sodium HyaluronateWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about WaterXanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.
On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.
Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.
Learn more about Xanthan Gum