VT Cosmetics Airy Sun Cream

Dibutyl Adipate is an emollient and solvent. It is created from butyl alcohol and adipic acid.

As a solvent, Dibutyl Adipate helps mix and disperse ingredients evenly.

Diethylamino Hydroxybenzoyl Hexyl Benzoate (DHHB) is a chemical UV-A absorber. It is formulated for high UVA protection (320-400 nm).

DHHB is well-liked for:

You might know this ingredient as Tinosorb S or Bemotrizinol. It is a UV filter that covers both UVA and UVB rays.

This ingredient has two peak UV absorption peaks ( 310 and 340 nm) and is able to absorb both UV-A and UV-B rays. This ingredient works by preventing UV rays from reaching and damaging your skin.

Ethylhexyl Triazone is a modern chemical sunscreen that protects from UV-B radiation.

It is the most effective of existing UV-B filters, as it provides the highest level of photo-stable absorption. It protects from the entire UV-B range (280 to 320nm), with it's highest level of protection at 314nm.

Caprylyl Methicone is a type of silicone.

It helps soften and soothe the skin by creating a thin film on top. This film helps trap moisture, keeping your skin hydrated.

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (Tinosorb M) is a hybrid and broad-spectrum UV ingredient. It is both a UV absorber and filter.

UV absorbers are an agent that absorbs UV rays. They protect your skin by using chemical reactions to convert UV rays into heat and energy. UV filters physically reduce the amount of UV rays from reaching your skin.

Butyloctyl Salicylate is similar to octisalate. It a photostabilizer, SPF booster, emollient and solvent. Its main purpose is to evenly spread out ingredients.

This ingredient is a common sunscreen ingredient carrier and photostabilizer. According to a manufacturer, it is suitable for carrying micro Titanium Dioxide, Zinc Oxide, and pigments.

C12-15 Alkyl Benzoate is made up of Benzoic Acid and long chain alcohols. It has a low molecular weight.

C12-15 Alkyl Benzoate is an emollient and texture enhancer. Due to its solubility, it is often used in sunscreens to help evenly distribute active ingredients.

Niacinamide is a multitasking form of vitamin B3 that strengthens the skin barrier, reduces pores and dark spots, regulates oil, and improves signs of aging.

And the best part? It's gentle and well-tolerated by most skin types, including sensitive and reactive skin.

Polymethylsilsesquioxane is a silicone used as a film forming agent.

When applied to the skin, this ingredient creates an invisible film on the surface. This film still allows oxygen to pass through, but prevents moisture from escaping. This can help condition and hydrate the skin. It also leaves a silky feel when applied.

We don't have a description for Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer yet.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

• It is a solvent, meaning that it helps to dissolve other ingredients. This also enhances the absorption of the product into one's skin.
• It is a humectant, which means that it helps attract moisture into the skin.
• It helps improve product application.
• It has mild preservative properties.

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse. 

It is a:

• Humectant, drawing moisture into the skin
• Emollient, helping to soften skin
• Solvent, dispersing and stabilizing formulas
• Preservative booster, enhancing the antimicrobial activity of other preservatives 

Pentylene glycol is typically used within a product to thicken it. It also adds a smooth, soft, and moisturizing feel to the product. It is naturally found in plants such as sugar beets.

The hydrophilic trait of Pentylene Glycol makes it a humectant. As a humectant, Pentylene Glycol helps draw moisture from the air to your skin. This can help keep your skin hydrated.

Cetearyl alcohol is a mixture of two fatty alcohols: cetyl alcohol and stearyl alcohol. It is mainly used as an emulsifier. Emulsifiers help prevent the separation of oils and products. Due to its composition, it can also be used to thicken a product or help create foam.

Cetearyl alcohol is an emollient. Emollients help soothe and hydrate the skin by trapping moisture.

Polyglyceryl-3 Methylglucose Distearate is created from the diester of stearic acid and the condensation product of methylglucose and Polyglycerin-3.

As an emulsifier, it is used to bind ingredients together. Many ingredients, such as oils and water, separate naturally. Emulsifiers prevent them from separating to ensure even consistency in texture.

Saccharomyces Ferment Filtrate is created from fermenting Saccharomyces, a yeast also known as baker's yeast or brewer's yeast.

As a humectant, Saccharomyces Ferment Filtrate helps draw moisture from the air to your skin to keep your skin hydrated. The humectant properties comes from its beta-glucan content.

Decyl Glucoside is a glucose-based surfactant and emulsion stabilizer. It is created by reacting glucose with the fatty acids from plants.

Surfactants help clean the skin by trapping oil, sebum, and dirt to be washed away. As an emulsion stabilizer, it stabilizes the ingredients in a product by preventing them from separating.

We don't have a description for Poly C10-30 Alkyl Acrylate yet.

Tromethamine helps balance the pH and improve the texture of a product. It is synthetically created.

As an emulsifier, Tromethamine prevents oil and water ingredients from separating. This helps stabilize the product and elongate a product's shelf life. Tromethamine also makes a product thicker.

Sodium Stearoyl Glutamate is an emulsifier and helps condition the skin. It is amino acid-based.

In higher amounts, it may act as a cleansing agent.

Carbomer is a polymer of acrylic acid. Its main role is to create a gel consistency.

A high amount of carbomer can cause pilling or balling up of products. Don't worry, most products contain 1% or less of carbomer.

Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic polymer. It is used to thicken and improve the texture of products. Due to its properties, it can prevent water and oil ingredients from separating.

Ammonium Acryloyldimethyltaurate/Vp Copolymer (let's call it AAVC for short) is a synthetically created polymer. It's used as a film-forming agent and used to thicken the consistency of products.

AAVC is able to increase the consistency and viscosity of products due to its large molecule size. It also prevents ingredients from separating.

Methylpropanediol is a synthetic solvent and humectant.

As a solvent, it helps dissolve other ingredients, helping to evenly distribute ingredients throughout the product. This ingredient has also been shown to have antimicrobial properties which makes it a preservative booster.

Ethylhexylglycerin (we can't pronounce this either) is commonly used as a preservative and skin softener. It is derived from glyceryl.

You might see Ethylhexylglycerin often paired with other preservatives such as phenoxyethanol. Ethylhexylglycerin has been found to increase the effectiveness of these other preservatives.

Adenosine is in every living organism. It is one of four components in nucleic acids that helps store our DNA.

Adenosine has many benefits when used. These benefits include hydrating the skin, smoothing skin, and reducing wrinkles. Once applied, adenosine increases collagen production. It also helps with improving firmness and tissue repair.

Trisodium Ethylenediamine Disuccinate is used to help stabilize a product.

It is a chelating agent, meaning it helps prevent metal ions from binding to other ingredients. This prevents unwanted reactions in products. Metal ions can come into a product via the water ingredient. They are found in trace amounts and are not known to be harmful.

Glycerin is already naturally found in your skin. It helps moisturize and protect your skin.

A study from 2016 found glycerin to be more effective as a humectant than AHAs and hyaluronic acid.

We don't have a description for Polyether-1 yet.

Albatrellus Confluens Extract is from a mushroom from Finland, known as the Nothern Truffle. (This mushroom is edible!) This ingredient helps soothe skin and provides antioxidants.

Albatrellus Confluens Extract helps decrease redness and irritation. It does this by blocking signals for our skin to get irritated.

Laureth-4 is created by reacting ethylene oxide with Lauryl Alcohol. It is a surfactant and emulsifier.

Surfactants reduce the surface tension of ingredients so they can mix better. Emulsifiers prevent ingredients such as oil and water from separating.

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Allantoin plays a role in soothing and moisturizing the skin. Because of this, it is often added to products with strong active ingredients.

Some studies have shown this ingredient can promote wound healing with higher concentrations.

Squalane is an emollient that helps the skin hold onto moisture. It's an oily liquid that occurs naturally in certain types of fish and plant oils.

Because squalane boosts hydration in the skin, it also comes with plenty of benefits: it is an antioxidant and can help fight free radicals and skin damage. Squalane is also found to have a detoxifying effect when applied.

Panthenol is a common ingredient that helps hydrate and soothe the skin. It is found naturally in our skin and hair.

There are two forms of panthenol: D and L.

We don't have a description for Hydrolyzed Rye Phytoplacenta Extract yet.

We don't have a description for Sparassis Crispa Extract yet.

This is the extract of the Reishi mushroom.

The Reishi mushroom has antioxidant, anti-inflammatory, and antimicrobial properties.

Lactobacillus Ferment is created by fermenting the Lactobacillus bacteria. It helps keep our skin's natural barrier and microbiome healthy.

Studies show lactobacillus ferment to be effective at repairing the skin barrier. Having a healthy skin barrier helps keep your skin healthy and hydrated. It also protects against bad bacteria.

We don't have a description for Lentinus Edodes Extract yet.

We don't have a description for Trametes Versicolor Extract yet.

Tremella Fuciformis Extract comes from the tremella fuciformis mushroom, also known as snow mushroom or white jelly mushroom.

The snow mushroom has moisturizing and antioxidant properties.

Tocopherol (also known as Vitamin E) is a common antioxidant used to help protect the skin from free-radicals and strengthen the skin barrier. It's also fat soluble - this means our skin is great at absorbing it.

Vitamin E also helps keep your natural skin lipids healthy. Your lipid skin barrier naturally consists of lipids, ceramides, and fatty acids. Vitamin E offers extra protection for your skin’s lipid barrier, keeping your skin healthy and nourished.

We don't have a description for Lentinus Edodes Mycelium Extract yet.

Beta-Glucan is a polysaccharide. It can be derived from the cell walls of seaweed, oats, yeast, and fungi. It hydrates the skin and helps boost your skin's natural barrier.

As an antioxidant, beta-glucan helps fight free-radicals. Free-radicals are molecules that may damage your skin cells, such as pollution.