This anti-aging serum is formulated around Retinol and Alpha-Arbutin to soften the look of wrinkles and fade the look of dark spots.
This anti-aging serum is formulated around Niacinamide and Bakuchiol to soften the look of wrinkles and refine skin texture.
What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningRetinol
Skin ConditioningAlpha-Arbutin
AntioxidantButylene Glycol
HumectantAscorbyl Palmitate
AntioxidantSodium Hyaluronate
HumectantSodium Acrylates Copolymer
Xanthan Gum
EmulsifyingGlycerin
HumectantLinoleic Acid
CleansingLecithin
EmollientLinolenic Acid
CleansingArachidonic Acid
EmollientAzelamidopropyl Dimethyl Amine
AntimicrobialPalmitoyl Tripeptide-1
Skin ConditioningPalmitoyl Hexapeptide-12
Skin ConditioningHydroxyethylcellulose
Emulsion StabilisingPhloretin
AntioxidantTocopherol
AntioxidantFerulic Acid
AntimicrobialBHA
AntioxidantBHT
AntioxidantEthoxydiglycol
HumectantDisodium EDTA
Bisabolol
AntioxidantPolysorbate 80
EmulsifyingDehydroacetic Acid
PreservativeBenzoic Acid
MaskingPolysorbate 20
EmulsifyingBenzyl Alcohol
PerfumingPhenoxyethanol
PreservativePoloxamer 407
EmulsifyingEthylhexylglycerin
Skin ConditioningWater, Retinol, Alpha-Arbutin, Butylene Glycol, Ascorbyl Palmitate, Sodium Hyaluronate, Sodium Acrylates Copolymer, Xanthan Gum, Glycerin, Linoleic Acid, Lecithin, Linolenic Acid, Arachidonic Acid, Azelamidopropyl Dimethyl Amine, Palmitoyl Tripeptide-1, Palmitoyl Hexapeptide-12, Hydroxyethylcellulose, Phloretin, Tocopherol, Ferulic Acid, BHA, BHT, Ethoxydiglycol, Disodium EDTA, Bisabolol, Polysorbate 80, Dehydroacetic Acid, Benzoic Acid, Polysorbate 20, Benzyl Alcohol, Phenoxyethanol, Poloxamer 407, Ethylhexylglycerin
Water
Skin ConditioningMethylpropanediol
SolventNiacinamide
SmoothingGlycerin
HumectantNeopentyl Glycol Dicaprate
EmollientCyclodextrin
Absorbent1,2-Hexanediol
Skin ConditioningHydrogenated Lecithin
EmulsifyingPropanediol
SolventPolyglyceryl-10 Laurate
Skin ConditioningCaprylic/Capric Triglyceride
MaskingHydroxyacetophenone
AntioxidantBakuchiol
AntimicrobialButyrospermum Parkii Butter
Skin ConditioningSodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Emulsion StabilisingGlyceryl Stearate
EmollientPolyisobutene
Sodium Polyacrylate
AbsorbentPanthenol
Skin ConditioningMacadamia Ternifolia Seed Oil
EmollientHydrogenated Phosphatidylcholine
EmulsifyingHydroxypropyl Methylcellulose
Emulsion StabilisingSqualane
EmollientPullulan
BHT
AntioxidantDipropylene Glycol
HumectantPolysorbate 20
EmulsifyingAlcohol
AntimicrobialRetinol
Skin ConditioningCitric Acid
BufferingCitrus Reticulata Peel Extract
Skin ConditioningGleditsia Australis Fruit Extract
Skin ConditioningSophora Flavescens Root Extract
AntioxidantPEG-5 Rapeseed Sterol
CleansingBrassica Campestris Sterols
EmollientAdenosine
Skin ConditioningCaprylyl/Capryl Glucoside
CleansingSorbitan Oleate
EmulsifyingXanthan Gum
EmulsifyingCitrus Nobilis Peel Extract
MaskingDipotassium Glycyrrhizate
HumectantCeteth-5
EmulsifyingCeteth-3
EmulsifyingLarix Leptolepis Bark Extract
HumectantPoterium Officinale Root Extract
AntimicrobialAloe Barbadensis Leaf Extract
EmollientSodium Hyaluronate
HumectantCholesterol
EmollientCrithmum Maritimum Extract
Skin ConditioningPorphyridium Cruentum Extract
Skin ConditioningHexapeptide-61 Dimer
Skin ConditioningPotassium Cetyl Phosphate
EmulsifyingCaprylyl Glycol
EmollientGlucose
HumectantCopper Tripeptide-1
Skin ConditioningCeramide NP
Skin ConditioningAcetyl Tetrapeptide-15
Skin ConditioningDisodium EDTA
Hyaluronic Acid
HumectantHydrolyzed Hyaluronic Acid
HumectantHydrolyzed Sodium Hyaluronate
Skin ConditioningHydroxypropyltrimonium Hyaluronate
Potassium Hyaluronate
Skin ConditioningPentylene Glycol
Skin ConditioningSodium Hyaluronate Crosspolymer
HumectantSodium Acetylated Hyaluronate
HumectantWater, Methylpropanediol, Niacinamide, Glycerin, Neopentyl Glycol Dicaprate, Cyclodextrin, 1,2-Hexanediol, Hydrogenated Lecithin, Propanediol, Polyglyceryl-10 Laurate, Caprylic/Capric Triglyceride, Hydroxyacetophenone, Bakuchiol, Butyrospermum Parkii Butter, Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Glyceryl Stearate, Polyisobutene, Sodium Polyacrylate, Panthenol, Macadamia Ternifolia Seed Oil, Hydrogenated Phosphatidylcholine, Hydroxypropyl Methylcellulose, Squalane, Pullulan, BHT, Dipropylene Glycol, Polysorbate 20, Alcohol, Retinol, Citric Acid, Citrus Reticulata Peel Extract, Gleditsia Australis Fruit Extract, Sophora Flavescens Root Extract, PEG-5 Rapeseed Sterol, Brassica Campestris Sterols, Adenosine, Caprylyl/Capryl Glucoside, Sorbitan Oleate, Xanthan Gum, Citrus Nobilis Peel Extract, Dipotassium Glycyrrhizate, Ceteth-5, Ceteth-3, Larix Leptolepis Bark Extract, Poterium Officinale Root Extract, Aloe Barbadensis Leaf Extract, Sodium Hyaluronate, Cholesterol, Crithmum Maritimum Extract, Porphyridium Cruentum Extract, Hexapeptide-61 Dimer, Potassium Cetyl Phosphate, Caprylyl Glycol, Glucose, Copper Tripeptide-1, Ceramide NP, Acetyl Tetrapeptide-15, Disodium EDTA, Hyaluronic Acid, Hydrolyzed Hyaluronic Acid, Hydrolyzed Sodium Hyaluronate, Hydroxypropyltrimonium Hyaluronate, Potassium Hyaluronate, Pentylene Glycol, Sodium Hyaluronate Crosspolymer, Sodium Acetylated Hyaluronate
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
BHT is a synthetic antioxidant and preservative.
As an antioxidant, it helps your body fight off free-radicals. Free-radicals are molecules that may damage your skin cells.
As a preservative, it is used to stabilize products and prevent them from degrading. Specifically, BHT prevents degradation from oxidation.
The concerns related to BHT come from oral studies; this ingredient is currently allowed for use by both the FDA and EU.
However, it was recently restricted for use in the UK as of April 2024.
Learn more about BHTDisodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.
This ingredient mainly works behind the scenes and helps with:
On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.
One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).
Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.
You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.
Learn more about Disodium EDTAGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinPolysorbate 20 is a gentle, water-soluble emulsifier and mild surfactant. It stops oil and water from separating to keep your formulas blended and stable.
It also acts as a mild penetration enhancer by helping active ingredients absorb slightly better.
The common safety discussion around this ingredient involves a manufacturing byproduct called 1,4-dioxane.
Trace amounts can form during production but the EU's Scientific Committee on Consumer Safety has concluded that levels at/below 10 ppm in finished products are safe (commercial products consistently fall within acceptable margins).
True allergic reactions are uncommon and the CIR Expert Panel has confirmed this ingredient to be safe as used in cosmetics.
Because it is derived from lauric acid, it may not be fungal acne safe.
Learn more about Polysorbate 20Retinol is one of the most studied anti-aging ingredients in skincare (and for good reason!).
It's a form of vitamin A that your skin converts into Retinoic Acid, the active molecule that actually does the work in your cells.
That conversion happens in two steps: your skin first turns Retinol into Retinaldehyde (also called Retinal), then turns Retinaldehyde into Retinoic Acid.
Retinol is converted to biologically active retinoic acid via retinaldehyde by dehydrogenases in a two-step oxidation process.
Each step is a little "upgrade" toward the active form which is part of why Retinol is gentler than prescription Retinoic Acid; your skin does the work gradually. This also explains where Retinol sits in the retinoid family.
Here is the retinoid family ranked roughly by strength: Retinyl Esters (like Retinyl Palmitate) < Retinol < Retinaldehyde < Retinoic Acid.
Retinoid activity increases in that order, while tolerance runs in reverse; retinyl esters are the gentlest and retinoic acid the most irritating.
The more conversion steps an ingredient needs, the gentler (and slower) it tends to be, so Retinol lands in a nice middle spot. It's more effective than the esters, gentler than prescription options.
Once it becomes Retinoic Acid, it binds to receptors inside your cells' nuclei (called RARs and RXRs). These receptor pairs bind to specific DNA motifs called retinoic acid response elements and act like switches that turn certain genes on or off.
In practice, this means a few things happen in a formula. It:
That last two are worth a closer look.
A study that tested Retinol directly (not just prescription Retinoic Acid) found that four weeks of retinol thickened the epidermis and switched on the genes for Collagen I and Collagen III, with more procollagen I and III showing up in the skin. And after twelve weeks, facial wrinkles were visibly reduced.
Retinoids more broadly stimulate the skin's synthesis of hyaluronan and other glycosaminoglycans, part of what gives skin a plumper, more hydrated look over time.
So even the gentler OTC form is doing real structural work (not just sitting on the surface).
It's also worth knowing Retinol isn't only a wrinkle ingredient; it can help with uneven tone, dark spots, rough texture, and the look of pores as well because it speeds up turnover and influences pigment.
The research backs this up as well.
A pooled analysis of six clinical studies found that 0.1% stabilized retinol improved all signs of photoaging versus vehicle as early as week 4 and through 12 weeks, with only a few mild cases of irritation.
Another study comparing concentrations found that 0.3% and 1% Retinol were similarly effective at remodeling photodamaged skin, but 0.3% caused fewer adverse reactions when used daily (a useful reminder that more isn't always better).
Retinol is about tenfold less potent than Retinoic Acid. This is why it works as a gentler, non-prescription option that builds results over time.
Typical concentrations range from 0.1-1%, with 0.1% to 0.3% being a well-supported sweet spot for visible benefits with good tolerability.
One quirk worth mentioning: Retinol is famously unstable.
It's highly sensitive to light and oxygen, and UV exposure breaks it down into a range of degradation products.
Real-world testing bears this out, with retinoid content in some products dropping anywhere from 0% to 80% after six months at room temperature, and even more at higher temperatures.
This is why good formulations lean on opaque, air-tight packaging (think tubes and pumps, not clear jars) and often "encapsulate" the Retinol to shield it.
Signs of oxidation include your product turning yellow or smelling "off". Keeping it somewhere cool and dark, and using it up within a few months of opening helps it stay effective.
The most common side effects are mild and temporary: usually some dryness, redness, or light peeling as your skin adjusts. These tend to settle with consistent and lower-frequency use.
Like all retinoids, Retinol works best with nightly use, a good moisturizer, and daytime sunscreen.
The "ramp up" method works well: start with Retinol once a week to give your skin time to adjust, which keeps irritation low. Slowly add more nights until you reach your goal frequency once your skin feels comfortable.
Retinoids also make your skin more sensitive to the sun in the first few weeks, so wear sunscreen every morning and protect your skin from direct sun while you build up tolerance.
One safety note: topical Retinoids aren't recommended during pregnancy or breastfeeding. Systemic absorption from creams is low but because high oral vitamin A is a known teratogen and topical safety data are limited, most clinicians recommend stopping retinoids when pregnant or trying to conceive.
Learn more about RetinolSodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.
In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.
Interestingly, the size of the molecule affects its behavior:
Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.
Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.
You'll typically see concentrations between 0.1-2% for this ingredient.
Learn more about Sodium HyaluronateWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about WaterXanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.
On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.
Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.
Learn more about Xanthan Gum