This oil-control day moisturizer is formulated around Niacinamide and Zinc PCA to balance excess oil and refine the look of pores.
This barrier-repair moisturizer is formulated around Ectoin and Sodium Hyaluronate to strengthen the skin barrier and hydrate skin.
What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningGlycerin
HumectantCaprylic/Capric Triglyceride
MaskingCannabis Sativa Seed Oil
EmollientOleyl Erucate
EmollientNiacinamide
SmoothingZinc PCA
HumectantHydrolyzed Pea Protein
EmollientGlucose
HumectantSodium Chloride
MaskingSodium Succinate
BufferingAmmonium Acryloyldimethyltaurate/Vp Copolymer
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Emulsion StabilisingOenothera Biennis Oil
EmollientSqualane
EmollientAchillea Millefolium Flower Extract
AntioxidantEthylhexylglycerin
Skin ConditioningNeopentyl Glycol Diheptanoate
EmollientTocopheryl Acetate
AntioxidantPhenoxyethanol
PreservativeSodium Phytate
ChelatingSodium Hydroxide
BufferingWater, Glycerin, Caprylic/Capric Triglyceride, Cannabis Sativa Seed Oil, Oleyl Erucate, Niacinamide, Zinc PCA, Hydrolyzed Pea Protein, Glucose, Sodium Chloride, Sodium Succinate, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Oenothera Biennis Oil, Squalane, Achillea Millefolium Flower Extract, Ethylhexylglycerin, Neopentyl Glycol Diheptanoate, Tocopheryl Acetate, Phenoxyethanol, Sodium Phytate, Sodium Hydroxide
Water
Skin ConditioningGlycerin
HumectantButylene Glycol
Humectant1,2-Hexanediol
Skin ConditioningMethyl Trimethicone
Skin ConditioningHydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Emulsion StabilisingAmmonium Acryloyldimethyltaurate/Vp Copolymer
Cetyl Ethylhexanoate
EmollientMicrocrystalline Cellulose
AbsorbentCamellia Japonica Seed Oil
EmollientEctoin
Skin ConditioningSodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Emulsion StabilisingPolyisobutene
Sorbitan Isostearate
EmulsifyingEthylhexylglycerin
Skin ConditioningCellulose Gum
Emulsion StabilisingSodium Hyaluronate
HumectantDisodium EDTA
ChelatingSqualane
EmollientCaprylyl/Capryl Glucoside
CleansingSorbitan Oleate
EmulsifyingCaprylic/Capric Triglyceride
MaskingPolyglutamic Acid
Skin ConditioningHydrogenated Lecithin
EmulsifyingHydroxypropyltrimonium Hyaluronate
Hydrolyzed Hyaluronic Acid
HumectantHyaluronic Acid
HumectantHydrolyzed Sodium Hyaluronate
Skin ConditioningSodium Hyaluronate Crosspolymer
HumectantPotassium Hyaluronate
Skin ConditioningButyrospermum Parkii Butter
Skin ConditioningChlorella Vulgaris Extract
Skin ConditioningAloe Barbadensis Leaf Extract
EmollientCamellia Sinensis Leaf Extract
AntimicrobialCeramide NP
Skin ConditioningHouttuynia Cordata Extract
Skin ConditioningSoluble Collagen
HumectantPentylene Glycol
Skin ConditioningSodium Acetylated Hyaluronate
HumectantSodium Phytate
ChelatingCeramide AP
Skin ConditioningCeramide As
Skin ConditioningCeramide Ns
Skin ConditioningCholesterol
EmollientEucalyptus Globulus Leaf Extract
PerfumingSpirulina Platensis Extract
Skin ProtectingCodium Fragile Extract
Skin ConditioningEcklonia Cava Extract
Skin ConditioningEnteromorpha Compressa Extract
Skin ProtectingGelidium Cartilagineum Extract
Skin ProtectingHizikia Fusiforme Extract
Skin ConditioningLaminaria Japonica Extract
Skin ProtectingPlankton Extract
Skin ConditioningPorphyra Yezoensis Extract
Skin ConditioningSargassum Fulvellum Extract
Skin ConditioningUndaria Pinnatifida Extract
Skin ConditioningSodium DNA
Skin ConditioningAsiatic Acid
Skin ConditioningAsiaticoside
AntioxidantMadecassic Acid
Skin ConditioningPhytosphingosine
Skin ConditioningCeramide EOP
Skin ConditioningWater, Glycerin, Butylene Glycol, 1,2-Hexanediol, Methyl Trimethicone, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Cetyl Ethylhexanoate, Microcrystalline Cellulose, Camellia Japonica Seed Oil, Ectoin, Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Polyisobutene, Sorbitan Isostearate, Ethylhexylglycerin, Cellulose Gum, Sodium Hyaluronate, Disodium EDTA, Squalane, Caprylyl/Capryl Glucoside, Sorbitan Oleate, Caprylic/Capric Triglyceride, Polyglutamic Acid, Hydrogenated Lecithin, Hydroxypropyltrimonium Hyaluronate, Hydrolyzed Hyaluronic Acid, Hyaluronic Acid, Hydrolyzed Sodium Hyaluronate, Sodium Hyaluronate Crosspolymer, Potassium Hyaluronate, Butyrospermum Parkii Butter, Chlorella Vulgaris Extract, Aloe Barbadensis Leaf Extract, Camellia Sinensis Leaf Extract, Ceramide NP, Houttuynia Cordata Extract, Soluble Collagen, Pentylene Glycol, Sodium Acetylated Hyaluronate, Sodium Phytate, Ceramide AP, Ceramide As, Ceramide Ns, Cholesterol, Eucalyptus Globulus Leaf Extract, Spirulina Platensis Extract, Codium Fragile Extract, Ecklonia Cava Extract, Enteromorpha Compressa Extract, Gelidium Cartilagineum Extract, Hizikia Fusiforme Extract, Laminaria Japonica Extract, Plankton Extract, Porphyra Yezoensis Extract, Sargassum Fulvellum Extract, Undaria Pinnatifida Extract, Sodium DNA, Asiatic Acid, Asiaticoside, Madecassic Acid, Phytosphingosine, Ceramide EOP
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Ammonium Acryloyldimethyltaurate/Vp Copolymer is a synthetically created polymer. It's used as a film-forming agent and used to thicken the consistency of products.
Think of it as a supportive ingredient that helps your gel-creams feel silky, "cloud cream-like", and spread evenly without being greasy.
The Cosmetic Ingredient Review (CIR) Expert Panel evaluated it (along with 22 other acryloyldimethyltaurate polymers) and concluded it's:
Due to its large molecular size, it sits on the surface of skin rather than penetrating it.
Learn more about Ammonium Acryloyldimethyltaurate/Vp CopolymerCaprylic/Capric Triglyceride (aka MCT Oil) is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping to prevent moisture loss.
Though it behaves like an oil, it is not technically one due to its chemical composition. One perk of this ingredient is that it is very stable, resistant to oxidation, and unlikely to go rancid.
In practice, that translates to a long shelf life and a consistently elegant skin feel.
While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Just patch test if you have concerns.
Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.
This ingredient is treated as the gold standard fungal acne safe oil. Even though it is coconut derived, the problematic lauric acid is stripped out.
This leaves just caprylic (C8) and capric (C10) acid. These chain lengths actually trend antifungal; a 2020 study found caprylic acid was enough to disrupt Malassezia furfur cell membrane, with a caprylic acid derivative damaging membrane structures at concentrations as low as 0.2%.
Learn more about Caprylic/Capric TriglycerideEthylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Learn more about EthylhexylglycerinGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinSodium Phytate is the sodium salt of Phytic acid, a compound that plants store phosphorus in. It's the plant-derived alternative to ingredients like Disodium EDTA.
In skincare, this ingredient is a chelator that grabs onto trace metal ions like iron and copper that sneak into formulas through water/raw materials.
Those metals speed up oxidation so binding them keeps oils, fragrance, and actives from going off, stops color changes, and helps the preservative system work harder.
Survey data shows usage levels range from 0.0099%-0.5% in leave-on products, 0.025%-0.3% in rinse-off, and up to 0.05% in eye-area products. Suppliers typically recommend a range between 0.05-0.5%.
Learn more about Sodium PhytateSqualane is the hydrogenated and shelf-stable form of squalene (a lipid that naturally occurs in human sebum).
It is an emollient and skin conditioning agent that is able to integrate seamlessly into the skin's lipid barrier without clogging pores.
This is due to how structurally similar it is to what your skin already produces.
Though it is mostly an emollient that helps soften and hydrate skin, it also has some humectant and occlusive action. Humectants help the skin retain moisture while occlusives seal it in, making squalane a triple-threat moisturizer.
Research shows it has antioxidant capabilities that help protect against stressors like UV exposure, specifically UVA induced oxidative stress. This study also found that it supports collagen biosynthesis in human dermal fibroblasts.
No clinical study has reported significant adverse effects and irritation reactions are very rare from this ingredient (even at 100% concentration).
Overall, it's a fantastic ingredient for hydration and is suitable for all skin types.
This depends on the source. Squalane can be derived from both plants and animals. Most squalane used in skincare comes from plants.
Please note: the source of squalane is only known if disclosed by the brand. We recommend reaching out to the brand if you have any questions about their squalane.
Read more about squalene with an "e".
Though squalane is often called an oil, it’s technically not one. It is a hydrocarbon, meaning it is only made of carbon and hydrogen. True oils are triglycerides and made of fatty acids and glycerol.
The term “oil-free” isn’t regulated so companies can define it however they want. Some exclude all oils, while others just avoid mineral oil or comedogenic oils.
Squalane has a comedogenic rating of 1 from the original 1972 study that tested raw ingredients under occlusion on rabbit ears. This system is not standardized or peer-reviewed, and using the raw ingredients is very different from how diluted cosmetic formulations are used on human skin.
A comedogenic rating of 1 means it is "unlikely to clog pores" according to the original rating system.
The overall formula of a product matters more than the individual ingredients on whether or not it will cause clogged pores.
Learn more about SqualaneWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water