What's inside

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Show highlights for:

Water

Skin Conditioning

Dibutyl Adipate

Emollient

Glycerin

Humectant
0 / 0 Helps hydrate Dry Skin IconGood for Scar Healing IconGood for Barrier Repair Icon

Alcohol

Antimicrobial
Alcohol IconCan worsen Dry Skin IconMay worsen Eczema IconMay cause irritation IconMay worsen Rosacea Icon

Ethylhexyl Triazone

UV Absorber
UV Protection IconChemical UV Filter Icon

C12-15 Alkyl Benzoate

Antimicrobial

Dicaprylyl Carbonate

Emollient

Propanediol

Solvent
Helps hydrate Dry Skin IconGood for Barrier Repair Icon

CI 77891

Cosmetic Colorant

Glycereth-26

Humectant
0 / 0 Helps hydrate Dry Skin Icon

Polymethyl Methacrylate

Good for Oily Skin Icon

Diethylamino Hydroxybenzoyl Hexyl Benzoate

UV Filter
Chemical UV Filter Icon

1,2-Hexanediol

Skin Conditioning
Helps hydrate Dry Skin Icon

Betaine

Humectant
Helps hydrate Dry Skin IconHelps reduce irritation IconGood for Barrier Repair Icon

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

Skin Conditioning
UV Protection IconChemical UV Filter Icon

Brassica Oleracea Capitata Leaf Extract

Skin Conditioning

Lupinus Albus Seed Extract

Skin Conditioning

Brassica Oleracea Italica Extract

Astringent

Brassica Oleracea Acephala Leaf Extract

Humectant

Daucus Carota Sativa Root Extract

Skin Conditioning
Helps reduce irritation Icon

Camellia Sinensis Leaf Extract

Antimicrobial
Antioxidant IconHelps with Anti-Aging IconHelps hydrate Dry Skin IconHelps brighten skin IconHelps reduce irritation IconGood for Oily Skin IconGood for Minimizing Pores IconHelps reduce Skin Redness Icon

Perilla Frutescens Leaf Extract

Masking

Pyrus Malus Leaf Extract

Skin Conditioning

Rosmarinus Officinalis Leaf Extract

Antimicrobial

Origanum Vulgare Extract

Skin Conditioning

Lavandula Angustifolia Flower Extract

Cleansing
May cause irritation IconEU Allergen Icon

Thymus Vulgaris Flower/Leaf/Stem Extract

Skin Conditioning

Tocopherol

Antioxidant
0-3 / 0-3 Vitamin E IconAntioxidant IconHelps with Anti-Aging IconHelps hydrate Dry Skin IconHelps brighten skin IconHelps reduce Skin Redness IconGood for Dark Spots IconGood for Barrier Repair Icon

Glycyrrhiza Glabra Root Extract

Bleaching
Helps hydrate Dry Skin IconHelps brighten skin IconHelps reduce irritation IconHelps reduce Skin Redness IconGood for Scar Healing IconGood for Dark Spots IconGood for Barrier Repair Icon

Agrimonia Eupatoria Extract

Astringent

Inositol

Humectant
Helps hydrate Dry Skin Icon

Alumina

Abrasive
Exfoliant Icon

Vanilla Planifolia Fruit Extract

Skin Conditioning
Helps reduce irritation Icon

Ammonium Acryloyldimethyltaurate/Beheneth-25 Methacrylate Crosspolymer

Emulsion Stabilising

Jasminum Officinale Flower Extract

Masking
Fragrance IconMay cause irritation IconEU Allergen Icon

Aluminum Stearate

Cosmetic Colorant

Cardiospermum Halicacabum Flower/Leaf/Vine Extract

Skin Conditioning

Butylene Glycol

Humectant
1 / 0 Helps hydrate Dry Skin IconGood for Barrier Repair Icon

Cucurbita Pepo Fruit Extract

Skin Conditioning
Helps reduce irritation IconGood for Scar Healing Icon

Echium Plantagineum Seed Oil

Skin Conditioning
Oil IconHelps reduce Skin Redness IconNot safe for Fungal Acne Icon

Polyhydroxystearic Acid

Emulsifying
Not safe for Fungal Acne Icon

Helianthus Annuus Seed Oil Unsaponifiables

Emollient
Oil IconNot safe for Fungal Acne Icon

Styrene/Acrylates Copolymer

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Emulsion Stabilising

Tromethamine

Buffering

Pentylene Glycol

Skin Conditioning
Good for Barrier Repair Icon

Ethylhexylglycerin

Skin Conditioning

Xanthan Gum

Emulsifying

Carbomer

Emulsion Stabilising
1 / 0

Octyldodecanol

Emollient
Fatty Alcohol Icon

Arachidyl Alcohol

Emollient
Fatty Alcohol Icon

Behenyl Alcohol

Emollient
Fatty Alcohol Icon

Arachidyl Glucoside

Emulsifying

Helianthus Annuus Seed Oil

Emollient
0 / 0 Oil IconHelps hydrate Dry Skin IconNot safe for Fungal Acne Icon

Prunus Amygdalus Amara Kernel Oil

Masking
Oil IconFragrance Icon

Glucose

Humectant
Helps hydrate Dry Skin IconGood for Barrier Repair Icon

Reviews

3.66
Overall rating
5
4
3
2
1
What people say
Hydrating 54% No Scent 44% Absorbs Well 42%
2.00
Overall rating
5
4
3
2
1
What people say
Absorbs Well 100% Broke Me Out 100% Hydrating 100%

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic polymer. It is used to thicken, emulsify, and improve the texture of products.

As an emulsifier, it helps stabilize oil-in-water emulsions to give products an elegant feel when applied.

It can also form a thin protective film on skin. One study found that a formula using this polymer helped slow down how quickly other ingredients (like DEET) were absorbed through skin.

A 2024 study of over 1,300 patients confirmed that sensitization to this ingredient is rare. It is also non-mutagenic and has a clean track record.

Learn more about Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Emollient, Emulsion Stabilising

Behenyl Alcohol is a type of fatty alcohol (these are different from the drying, solvent alcohols).

Fatty Alcohols have hydrating properties and are most often used as an emollient or to thicken a product. They are usually derived from natural fats and oils; behenyl alcohol is derived from the fats of vegetable oils.

Emollients help keep your skin soft and hydrated by creating a film that traps moisture in.

In 2000, Behenyl Alcohol was approved by the US as medicine to reduce the duration of cold sores.

Learn more about Behenyl Alcohol
Skin Conditioning, UV Absorber, UV Filter

This ingredient is better known as bemotrizinol or Tinosorb S and is one of the best broad-spectrum UV filters in modern sunscreen.

It works by absorbing UV light across a whole range (280-400 nm) with peaks around 310 nm (UVB) and 340-345 nm (UVA). This means it covers UVB plus the deeper UVA wavelengths that drive photoaging and pigmentation.

Another pro?

It's exceptionally photostable, barely degrades in sunlight, and acts as a "bodyguard" for less stable filters.

That's why you'll see it paired with avobenzone or octinoxate; this team up ensures they keep working through sun exposure.

Safety reviews have been reassuring across the board. This ingredient shows low absorption through the skin, rarely irritates, and lab studies found it doesn't act like a hormone in the body (a concern that's been raised about some older sunscreen filters).

On maximum concentrations:

In 2026, the US F.D.A finally added it as an OTC sunscreen ingredient at concentrations up to 6% for adults / children 6 months and older

Learn more about Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Humectant, Masking, Skin Conditioning

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Learn more about Butylene Glycol
Emulsion Stabilising, Gel Forming

Carbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.

Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.

It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.

Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.

A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.

Learn more about Carbomer
Emollient, Skin Conditioning, Solvent

Dibutyl Adipate is a lightweight, oil-soluble ester that acts as an emollient and solvent. It helps products spread more easily and leaves a soft, silky, dry-touch finish without being greasy.

You'll likely see this ingredient in sunscreens because it does a nice job dissolving UV filters and keeping them evenly distributed.

This ingredient has been found to be safe as used in cosmetics, wasn't a skin or eye irritant in clinical patch testing, and wasn't phototoxic.

In a clinical comedogenicity test, this ingredient tested negative so it isn't likely to clog pores.

Typical use levels are about 5-8% for sunscreens + nail products, but can range from 0.005%-8% depending on the product.

Learn more about Dibutyl Adipate
Emollient, Skin Conditioning

Dicaprylyl Carbonate comes from carbonic acid and caprylyl alcohol, a fatty alcohol. It is an emollient and gives skin a velvet feel. The sources of Dicaprylyl Carbonate may be synthetic or from animals.

As an emollient, Dicaprylyl Carbonate creates a film on the skin. This film traps moisture in, keeping your skin soft and hydrated.

Diethylamino Hydroxybenzoyl Hexyl Benzoate (DHHB) is a chemical UV-A absorber. It is formulated for high UVA protection (320-400 nm).

DHHB is well-liked for:

DHHB has been approved by the EU, Japan, Taiwan, and South America for use up to 10%. Unfortunately, it has not been approved for use in the US or Canada due to slow regulatory processes.

This ingredient is soluble in oils, fats, and lipids.

Learn more about Diethylamino Hydroxybenzoyl Hexyl Benzoate
UV Absorber, UV Filter

Ethylhexyl Triazone (aka Octyl Triazone) is an oil-soluble organic UVB filter. It has peak absorption around 314 nm, right in the middle of the UVB range.

This ingredient is described as one of the most effective UVB filters available and small concentrations are enough to deliver a high SPF thanks to its strong UV absorbing power.

Formulators love it for its stability; its ability to filter UV stays practically unchanged even under intense radiation and it can also help boost the photostability of less stable filters like avobenzone.

It's also a great pick for water resistant products because it's insoluble in water and has a good affinity for keratin.

Because it's a big, heavy molecule, the European Scientific Committee has found to to have very low dermal penetration and negative results for allergenicity.

In vitro testing also showed a low absorption rate and clean results on irritation.

Typical use levels are 1-5% with 5% being the maximum in the EU, Japan, and other markets that allow it. However, this ingredient is not approved yet in the US or Canada.

Learn more about Ethylhexyl Triazone
Humectant, Skin Conditioning, Skin Protecting

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Learn more about Glycerin
Solvent

Propanediol is an all-star ingredient. It softens, hydrates, and smooths the skin. 

It’s often used to:

Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.

Learn more about Propanediol
Antioxidant, Masking, Skin Conditioning

Tocopherol is a fat-soluble antioxidant known as Vitamin E.

You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.

Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.

It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.

This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.

Concentrations usually range from 0.1-1% in most leave-on products.

Learn more about Tocopherol
Buffering, Masking

Tromethamine (aka THAM) is a synthetic amino acid that shows up in skincare as a helper ingredient.

It functions as a pH adjuster to help neutralize acidic ingredients and set a formula's pH to the right spot.

This matters a lot because a lot of actives (like vitamin C) needs a specific pH to work well and feel comfortable on skin.

Concentration use ranges from 0.1-1.0% depending on the formula.

Learn more about Tromethamine
Skin Conditioning, Solvent

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Learn more about Water
Emulsifying, Emulsion Stabilising, Gel Forming

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Learn more about Xanthan Gum

Similar Comparisons