What's inside

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Show highlights for:

Butyl Methoxydibenzoylmethane 2.5%

UV Absorber
UV Protection IconChemical UV Filter Icon

Homosalate 9%

Skin Conditioning
UV Protection IconChemical UV Filter IconNon-Reef-Safe Icon

Octocrylene 9%

UV Absorber
UV Protection IconChemical UV Filter IconMay worsen Eczema IconMay cause irritation IconNon-Reef-Safe Icon

Ethylhexyl Salicylate 4.5%

UV Absorber
0 / 0 UV Protection IconChemical UV Filter IconNon-Reef-Safe Icon

Water

Skin Conditioning

Propanediol

Solvent
Helps hydrate Dry Skin IconGood for Barrier Repair Icon

Butyloctyl Salicylate

Skin Conditioning
Non-Reef-Safe Icon

Glycerin

Humectant
0 / 0 Helps hydrate Dry Skin IconGood for Scar Healing IconGood for Barrier Repair Icon

Dimethicone

Emollient
1 / 0 Silicon IconGood for Scar Healing Icon

Silica

Abrasive
Exfoliant IconGood for Oily Skin IconGood for Minimizing Pores Icon

Diphenylsiloxy Phenyl Trimethicone

Skin Conditioning
Silicon Icon

Behenyl Alcohol

Emollient
Fatty Alcohol Icon

Trisiloxane

Skin Conditioning
Silicon Icon

Vp/Eicosene Copolymer

Cyclopentasiloxane

Emollient
Silicon Icon

Trimethylsiloxysilicate

Emollient
Silicon Icon

C14-22 Alcohols

Emulsion Stabilising
Fatty Alcohol Icon

Ceramide AP

Skin Conditioning
Ceramide IconHelps with Anti-Aging IconHelps hydrate Dry Skin IconHelps reduce irritation IconHelps reduce Skin Redness IconGood for Barrier Repair Icon

1,2-Hexanediol

Skin Conditioning
Helps hydrate Dry Skin Icon

Glyceryl Stearate

Emollient
1 / 0 Not safe for Fungal Acne Icon

PEG-100 Stearate

0 / 0 Not safe for Fungal Acne Icon

Phenyl Trimethicone

Skin Conditioning
Silicon Icon

Cetyl Alcohol

Emollient
2 / 2 Fatty Alcohol IconCoconut Derived IconNot safe for Fungal Acne Icon

Potassium Cetyl Phosphate

Emulsifying

Caprylyl Methicone

Skin Conditioning
Silicon Icon

Polyacrylate-13

Parfum

Masking
Synthetic Fragrance IconFragrance IconMay worsen Eczema IconMay worsen Rosacea Icon

Polyisobutene

C12-20 Alkyl Glucoside

Emulsifying

Ethylhexylglycerin

Skin Conditioning

Disodium EDTA

Polysorbate 20

Emulsifying
0 / 0 Not safe for Fungal Acne Icon

Sorbitan Isostearate

Emulsifying
1-2 / 0 Not safe for Fungal Acne Icon

Lavandula Angustifolia Flower Water

Skin Conditioning
May cause irritation Icon

Butylphenyl Methylpropional

Perfuming
Synthetic Fragrance IconFragrance IconMay cause irritation IconEU Allergen Icon

Hydroxycitronellal

Perfuming
Synthetic Fragrance IconFragrance IconMay worsen Eczema IconMay cause irritation IconMay worsen Rosacea IconEU Allergen Icon

Limonene

Perfuming
Fragrance IconMay worsen Eczema IconMay cause irritation IconMay worsen Rosacea IconEU Allergen Icon

Benzyl Salicylate

Perfuming
Fragrance IconMay cause irritation IconEU Allergen Icon

Alpha-Isomethyl Ionone

Perfuming
Synthetic Fragrance IconFragrance IconMay cause irritation IconEU Allergen Icon

Geraniol

Perfuming
Fragrance IconMay worsen Eczema IconMay cause irritation IconMay worsen Rosacea IconEU Allergen Icon

Citronellol

Perfuming
Fragrance IconMay worsen Eczema IconMay cause irritation IconMay worsen Rosacea IconEU Allergen Icon

Butylene Glycol

Humectant
1 / 0 Helps hydrate Dry Skin IconGood for Barrier Repair Icon

Glucose

Humectant
Helps hydrate Dry Skin IconGood for Barrier Repair Icon

Aloe Barbadensis Leaf Extract

Emollient
Helps hydrate Dry Skin IconHelps reduce irritation IconHelps reduce Skin Redness Icon

Pentylene Glycol

Skin Conditioning
Good for Barrier Repair Icon

Centella Asiatica Flower/Leaf/Stem Extract

Skin Conditioning
Helps reduce irritation IconHelps reduce Skin Redness IconGood for Barrier Repair Icon

Brassica Oleracea Italica Extract

Astringent

Hibiscus Abelmoschus Extract

Masking

Magnesium Sulfate

Calcium Chloride

Astringent

Tocopherol

Antioxidant
0-3 / 0-3 Vitamin E IconAntioxidant IconHelps with Anti-Aging IconHelps hydrate Dry Skin IconHelps brighten skin IconHelps reduce Skin Redness IconGood for Dark Spots IconGood for Barrier Repair Icon

Xanthan Gum

Emulsifying

Citric Acid

Buffering
AHA IconHelps brighten skin IconMay worsen Rosacea Icon

Sodium Benzoate

Masking
Preservative Icon

Potassium Sorbate

Preservative
Preservative Icon

Manganese Sulfate

Skin Conditioning
Sulfate Icon

Chenopodium Quinoa Seed Extract

Skin Conditioning

Zinc Sulfate

Antimicrobial
Good for Oily Skin Icon

Ascorbyl Glucoside

Antioxidant
Vitamin C IconAntioxidant IconHelps brighten skin IconGood for Scar Healing Icon

Reviews

5.00
Overall rating
5
4
3
2
1
3.00
Overall rating
5
4
3
2
1
What people say
Absorbs Well 100% Irritating 100% Light 100%

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

UV Absorber, UV Filter

Also known as Avobenzone, this ingredient is a chemical sunscreen filter that provides protection in the UV-A range.

Avobenzone is globally approved and is the most commonly used UV-A filter in the world.

Studies have found that avobenzone becomes ineffective when exposed to UV light (it is not photostable; meaning that it breaks down in sunlight). Because of this, formulations that include avobenzone will usually contain stabilizers such as octocrylene.

However, some modern formulations (looking at you, EU!) are able to stabilize avobenzone by coating the molecules.

Avobenzone does not protect against the UV-B range, so it's important to check that the sunscreen you're using contains other UV filters that do!

The highest concentration of avobenzone permitted is 3% in the US, and 5% in the EU.

Learn more about Butyl Methoxydibenzoylmethane
Skin Conditioning, Solvent, UV Filter

Butyloctyl Salicylate is a chemical UV filter structurally similar to octisalate. It is a photostabilizer, SPF booster, emollient and solvent. This ingredient helps evenly spread out ingredients.

According to a manufacturer, it is suitable for pairing with micro Titanium Dioxide, Zinc Oxide, and pigments.

Photostabilizers help stabilize UV-filters and prevents them from degrading quickly.

Learn more about Butyloctyl Salicylate
Emollient, Skin Conditioning, Skin Protecting

Dimethicone is a type of synthetic silicone created from natural materials such as quartz. It is also known as polydimethylsiloxane.

What it does:

Dimethicone comes in different viscosities:

Depending on the viscosity, dimethicone has different properties.

Ingredients lists don't always show which type is used, so we recommend reaching out to the brand if you have questions about the viscosity.

This ingredient is unlikely to cause irritation because it does not get absorbed into skin. However, people with silicone allergies should be careful about using this ingredient.

Note: Dimethicone may contribute to pilling. This is because it is not oil or water soluble, so pilling may occur when layered with products. When mixed with heavy oils in a formula, the outcome is also quite greasy.

Learn more about Dimethicone

Disodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.

This ingredient mainly works behind the scenes and helps with:

On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.

One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).

Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.

You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.

Learn more about Disodium EDTA
UV Absorber, UV Filter

Ethylhexyl Salicylate is an organic compound used to block UV rays. It primarily absorbs UVB rays but offers a small amount of UVA protection as well.

Commonly found in sunscreens, Ethylhexyl Salicylate is created from salicylic acid and 2-ethylhexanol. You might know salicylic acid as the effective acne fighter ingredient and BHA.

The ethylhexanol in this ingredient is a fatty alcohol and helps hydrate your skin, similar to oils. It is an emollient, which means it traps moisture into the skin.

According to manufacturers, Ethylhexyl Salicylate absorbs UV wavelength of 295-315 nm, with a peak absorption at 307-310 nm. UVA rays are linked to long term skin damage, such as hyperpigmentation. UVB rays emit more energy and are capable of damaging our DNA. UVB rays cause sunburn.

Learn more about Ethylhexyl Salicylate
Humectant, Skin Conditioning, Skin Protecting

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Learn more about Glycerin
Emollient, Emulsifying

Glyceryl Stearate is made by reacting glycerin with stearic acid (typically sourced from plant oils like palm or coconut). It's an emulsifier, emollient, and mild occlusive.

Emulsifiers help ingredients like oil and water stay mixed so your formula stays nicely blended and uniform in texture.

This ingredient is typically used in concentrations between 1-10%. Studies have found it to be non-sensitizing, non-phototoxic, and non-photoallergenic.

A close cousin of this ingredient is Glyceryl Stearate SE ("self-emulsifying"). This just has a small amount of sodium or potassium stearate added so it can emulsify without a co-emulsifier.

Since this ingredient is an ester of a C18 fatty acid, it may not be fungal acne safe. The Malassezia yeast can potentially metabolize within the C11-C24 range.

Fun fact: The human body also creates Glyceryl Stearate naturally.

Learn more about Glyceryl Stearate
Skin Conditioning, UV Absorber, UV Filter

Homosalate is a chemical sunscreen filter that provides protection in the UV-B range (280nm - 320 nm), with a peak protection at 306 nm. It is internationally approved for use in sunscreens.

Homosalate is not photo-stable, meaning it's strength as a UV filter degrades over time with exposure to the sun. Because of this, it's often used in combination with other chemical sunscreen filters as avobenzone (which protects from the UV-A range). Homosalate also helps act as a solvent for harder-to-dissolve UV filters.

(Part of the reason that sunscreens need to be frequently re-applied is due to the photo instability of many chemical sunscreen filters)

Currently, homosalate is approved in concentrations up to 10% in the EU and 15% in the US. The FDA is currently doing further research on the effects of homosalate, and it is possible that these approved concentrations will change in the future.

Learn more about Homosalate
UV Absorber, UV Filter

Octocrylene protects skin from sun damage. It absorbs UV-B with peak absorption of 304 nm. It is a common sunscreen ingredient and often paired with avobenzone, a UVA filter. This is because octocrylene stabilizes other sunscreen ingredients by protecting them from degradation when exposed to sunlight. Octocrylene is a photostable ingredient and loses about 10% of SPF in 95 minutes.

Octocrylene also acts as an emollient, meaning it helps skin retain moisture and softens skin. It is oil-soluble and hydrophobic, enhancing water-resistant properties in a product.

Those who are using ketoprofen, a topical anti-inflammatory drug, may experience an allergic reaction when using octocrylene. It is best to speak with a healthcare professional about using sunscreens with octocrylene.

The EU allows a maximum of these concentrations:

Learn more about Octocrylene
Skin Conditioning, Solvent

Pentylene glycol is typically used within a product to thicken it. It also adds a smooth, soft, and moisturizing feel to the product. It is naturally found in plants such as sugar beets.

The hydrophilic trait of Pentylene Glycol makes it a humectant. As a humectant, Pentylene Glycol helps draw moisture from the air to your skin. This can help keep your skin hydrated.

This property also makes Pentylene Glycol a great texture enhancer. It can also help thicken or stabilize a product.

Pentylene Glycol also acts as a mild preservative and helps to keep a product microbe-free.

Some people may experience mild eye and skin irritation from Pentylene Glycol. We always recommend speaking with a professional about using this ingredient in your routine.

Pentylene Glycol has a low molecular weight and is part of the 1,2-glycol family.

Learn more about Pentylene Glycol
Abrasive, Absorbent

Silica, also known as silicon dioxide, is a naturally occurring mineral. It is used as a fine, spherical, and porous powder in cosmetics.

Though it has exfoliant properties, the function of silica varies depending on the product.

The unique structure of silica enhances the spreadability and adds smoothness, making it a great texture enhancer.

It is also used as an active carrier, emulsifier, and mattifier due to its ability to absorb excess oil.

In some products, tiny microneedles called spicules are made from silica or hydrolyzed sponge. When you rub them in, they lightly polish away dead skin layers and enhance the penetration of active ingredients.

Learn more about Silica
Skin Conditioning, Solvent

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Learn more about Water

Similar Comparisons