AlumierMD Sheer Hydration Broad Spectrum SPF 30 Versus Peter Thomas Roth Max Mineral Tinted Sunscreen Broad Spectrum SPF 45
What's inside
What's inside
Key Ingredients
Benefits
Concerns
No concerns
Ingredients Side-by-side
Titanium Dioxide 7%
Cosmetic ColorantZinc Oxide 6.28%
Cosmetic ColorantWater
Skin ConditioningC12-15 Alkyl Benzoate
AntimicrobialCaprylic/Capric Triglyceride
MaskingPropanediol
SolventButyloctyl Salicylate
Skin ConditioningCetearyl Alcohol
EmollientAluminum Stearate
Cosmetic ColorantGlycerin
HumectantGlyceryl Stearate
EmollientPEG-100 Stearate
SurfactantLecithin
EmollientVitis Vinifera Seed Extract
AntimicrobialResveratrol
AntioxidantGlutathione
Tocopheryl Acetate
AntioxidantMagnesium Ascorbyl Phosphate
AntioxidantAcacia Senegal Gum
MaskingSynthetic Wax
AbrasivePolyhydroxystearic Acid
EmulsifyingCeteareth-20
CleansingAlumina
AbrasiveMicrocrystalline Cellulose
AbsorbentTriethoxycaprylylsilane
Xanthan Gum
EmulsifyingCellulose Gum
Emulsion StabilisingC20-40 Pareth-10
EmulsifyingHydroxyethyl Behenamidopropyl Dimonium Chloride
Polyquaternium-67
Disodium EDTA
Ethylhexylglycerin
Skin ConditioningPhenoxyethanol
PreservativeTitanium Dioxide 7%, Zinc Oxide 6.28%, Water, C12-15 Alkyl Benzoate, Caprylic/Capric Triglyceride, Propanediol, Butyloctyl Salicylate, Cetearyl Alcohol, Aluminum Stearate, Glycerin, Glyceryl Stearate, PEG-100 Stearate, Lecithin, Vitis Vinifera Seed Extract, Resveratrol, Glutathione, Tocopheryl Acetate, Magnesium Ascorbyl Phosphate, Acacia Senegal Gum, Synthetic Wax, Polyhydroxystearic Acid, Ceteareth-20, Alumina, Microcrystalline Cellulose, Triethoxycaprylylsilane, Xanthan Gum, Cellulose Gum, C20-40 Pareth-10, Hydroxyethyl Behenamidopropyl Dimonium Chloride, Polyquaternium-67, Disodium EDTA, Ethylhexylglycerin, Phenoxyethanol
Titanium Dioxide 1.93%
Cosmetic ColorantZinc Oxide 19.24%
Cosmetic ColorantWater
Skin ConditioningButyloctyl Salicylate
Skin ConditioningC9-12 Alkane
SolventCarthamus Tinctorius Oleosomes
EmollientIsodecyl Neopentanoate
EmollientDicaprylyl Carbonate
EmollientCetyl Alcohol
EmollientCoco-Caprylate/Caprate
EmollientPropanediol
SolventEthylhexyl Olivate
Skin ConditioningGlyceryl Stearate
EmollientPEG-100 Stearate
SurfactantCetearyl Olivate
Stearyl Phosphate
EmulsifyingTriethoxycaprylylsilane
Phenoxyethanol
PreservativeOleth-3 Phosphate
SurfactantSorbitan Olivate
EmulsifyingHdi/Trimethylol Hexyllactone Crosspolymer
Alumina
AbrasiveXanthan Gum
EmulsifyingPolymethylsilsesquioxane
Polyhydroxystearic Acid
EmulsifyingSqualane
EmollientGluconolactone
Skin ConditioningSodium Phytate
Isopropyl Titanium Triisostearate
EmollientSodium Benzoate
MaskingHydrogen Dimethicone
Potassium Sorbate
PreservativeSilica
AbrasiveTocopheryl Acetate
AntioxidantAscorbic Acid
AntioxidantDiamond Powder
AbrasiveIron Oxides
Mica
Cosmetic ColorantTitanium Dioxide 1.93%, Zinc Oxide 19.24%, Water, Butyloctyl Salicylate, C9-12 Alkane, Carthamus Tinctorius Oleosomes, Isodecyl Neopentanoate, Dicaprylyl Carbonate, Cetyl Alcohol, Coco-Caprylate/Caprate, Propanediol, Ethylhexyl Olivate, Glyceryl Stearate, PEG-100 Stearate, Cetearyl Olivate, Stearyl Phosphate, Triethoxycaprylylsilane, Phenoxyethanol, Oleth-3 Phosphate, Sorbitan Olivate, Hdi/Trimethylol Hexyllactone Crosspolymer, Alumina, Xanthan Gum, Polymethylsilsesquioxane, Polyhydroxystearic Acid, Squalane, Gluconolactone, Sodium Phytate, Isopropyl Titanium Triisostearate, Sodium Benzoate, Hydrogen Dimethicone, Potassium Sorbate, Silica, Tocopheryl Acetate, Ascorbic Acid, Diamond Powder, Iron Oxides, Mica
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Alumina is another name for the compound aluminum oxide. It is a white powder used as a thickener, absorbent, and abrasive.
As an absorbent, alumina can give a mattifying effect. It is used in mineral sunscreens to help coat nano-sized filters, such as titanium dioxide. By increasing the size of the UV filters, these ingredients stay on the skin for a longer time. By coating small sized ingredients, alumina helps thicken a product.
Alumina may be used as an abrasive, or exfoliant.
Alumina is naturally occurring in the mineral corundum. Certain varieties of corundum create rubies and sapphires. Corundum is also the crystalline form of alumina.
Learn more about AluminaButyloctyl Salicylate is a chemical UV filter structurally similar to octisalate. It is a photostabilizer, SPF booster, emollient and solvent. This ingredient helps evenly spread out ingredients.
According to a manufacturer, it is suitable for pairing with micro Titanium Dioxide, Zinc Oxide, and pigments.
Photostabilizers help stabilize UV-filters and prevents them from degrading quickly.
Learn more about Butyloctyl SalicylateGlyceryl Stearate is made by reacting glycerin with stearic acid (typically sourced from plant oils like palm or coconut). It's an emulsifier, emollient, and mild occlusive.
Emulsifiers help ingredients like oil and water stay mixed so your formula stays nicely blended and uniform in texture.
This ingredient is typically used in concentrations between 1-10%. Studies have found it to be non-sensitizing, non-phototoxic, and non-photoallergenic.
A close cousin of this ingredient is Glyceryl Stearate SE ("self-emulsifying"). This just has a small amount of sodium or potassium stearate added so it can emulsify without a co-emulsifier.
Since this ingredient is an ester of a C18 fatty acid, it may not be fungal acne safe. The Malassezia yeast can potentially metabolize within the C11-C24 range.
Fun fact: The human body also creates Glyceryl Stearate naturally.
Learn more about Glyceryl StearatePeg-100 Stearate is an emollient and emulsifier. As an emollient, it helps keep skin soft by trapping moisture in. On the other hand, emulsifiers help prevent oil and water from separating in a product.
PEGS are a hydrophilic polyether compound . There are 100 ethylene oxide monomers in Peg-100 Stearate. Peg-100 Stearate is polyethylene glycol ester of stearic acid.
Phenoxyethanol is a preservative that has germicide, antimicrobial, and aromatic properties. Studies show that phenoxyethanol can prevent microbial growth. By itself, it has a scent that is similar to that of a rose.
It's often used in formulations along with Caprylyl Glycol to preserve the shelf life of products.
Polyhydroxystearic Acid is a vegetable-derived soft wax made from castor oil. It's an emulsion stabilizer, thickener, and film former.
You'll likely see it in sunscreens because it helps disperse pigments and UV-reflecting minerals like titanium dioxide and zinc oxide evenly.
Depending on the concentration, it can drastically change the texture of a product from pasty solid (like lipstick) to sprayable liquid.
The CIR Expert Panel for Cosmetic Ingredient Safety has concluded this ingredient to be safe in cosmetics. The highest reported use concentration is 14.2% in lipsticks.
Learn more about Polyhydroxystearic AcidPropanediol is an all-star ingredient. It softens, hydrates, and smooths the skin.Â
Itâs often used to:
Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.
Learn more about PropanediolTitanium dioxide is a mineral UV filter widely used in sunscreens and cosmetics.
It is one of only two UV filters officially classified as âmineralâ by regulatory agencies, the other being zinc oxide.
Titanium dioxide provides broad-spectrum protection mostly in the UVB and UVAII range, with some protection in the UVAI range.
While its UVA protection isnât as strong as zinc oxideâs, the difference is minor.
A common myth is that mineral UV filters reflect UV light. However, modern research shows titanium dioxide absorbs UV radiation like chemical filters (~95% absorption & 5% reflection).
Thanks to its non-irritating nature, titanium dioxide is suitable for sensitive, acne-prone, or redness-prone skin. It is unlikely to cause "eye sting" like other sunscreen ingredients.
A major drawback of this ingredient is its white cast and thick texture. This is why mineral sunscreens often leave a white cast and are less cosmetically elegant than chemical/hybrid sunscreens.
To improve white cast and spreadability, micronized or nano-sized titanium dioxide is often used.
There are ongoing concerns surrounding nano-titanium oxide's impact on marine ecosystems.
There is no conclusive evidence that any form of titanium oxide (or any other sunscreen ingredients) will cause harm to marine ecosystems or coral reefs. The science is still developing but many consumers are keeping a close eye on this issue.
Please note, many destinations have reef-safety sunscreen rules. For instance, the U.S. Virgin Islands advises all visitors to use non-nano mineral sunscreens.
Nano mineral sunscreens once raised safety concerns about absorption into skin.
Extensive research has shown that they do not penetrate healthy or damaged skin; they remain safely on the surface and the top layer of dead skin (stratum corneum).
You'll likely find titanium dioxide bundled with alumina, silica, or dimethicone. These ingredients help make titanium dioxide highly photostable; this prevents it from interacting with other formula components under UV light.
Learn more about Titanium DioxideTocopheryl Acetate is AKA Vitamin E. It is an antioxidant and protects your skin from free radicals. Free radicals damage the skin by breaking down collagen.
One study found using Tocopheryl Acetate with Vitamin C decreased the number of sunburned cells.
Tocopheryl Acetate is commonly found in both skincare and dietary supplements.
Learn more about Tocopheryl AcetateTriethoxycaprylylsilane is a silicon-based surface modifier that makes sunscreens feel silky and makeup stay put.
Its main job is to coat mineral particles like titanium dioxide, zinc oxide, and color pigments in a thin, oily layer so they spread smoothly, don't clump, and stick to skin better.
This ingredient is typically used at low levels (up to 2.5% in eyeshadow and 1% in lipstick).
Learn more about TriethoxycaprylylsilaneWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about WaterXanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.
On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.
Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.
Learn more about Xanthan GumZinc Oxide is a mineral broad-spectrum UV filter; it is the broadest UVA and UVB reflector approved by the FDA. It also has skin protectant and skin soothing properties.
Zinc oxide is one of the most effective broad-spectrum UV filters. It protects against UVB, UVAII, and UVAI. In comparison to its counterpart titanium dioxide, zinc oxide provides uniform and extended UVA protection.
Another great benefit? This ingredient is highly photostable so it won't degrade easily under sunlight.
A common myth is that mineral UV filters are widely believed to primarily reflect UV light.
However, modern research shows titanium dioxide absorbs UV radiation like chemical filters (~95% absorption & 5% reflection).
Zinc oxide has great skin soothing properties so you'll likely find this in sunscreens formulated for sensitive skin or babies/children. It is unlikely to cause "eye sting" like other sunscreen ingredients.
Regulatory agencies consider zinc oxide to be non-toxic and safe. It has also been shown to not penetrate the skin.
Unfortunately, this ingredient does leave a visible white cast. This is why mineral sunscreens are often less cosmetically elegant than chemical or hybrid ones.
In cosmetics, zinc oxide can be found in both non-nano and nano-sized forms. The nano version is used to reduce white cast and improve the texture of sunscreen formulas.
There are ongoing concerns surrounding nano-zinc oxide's impact on marine ecosystems and whether it can be absorbed into skin.
Regarding marine ecosystems and coral reefs, there is no conclusive evidence that any form of zinc oxide (or any other sunscreen ingredients) will cause harm. The science is still developing but many consumers are keeping a close eye on this issue.
Please note, many destinations have reef-safety sunscreen rules. For instance, the U.S. Virgin Islands advises all visitors to use non-nano mineral sunscreens.
There has also been some stir about whether micronized or nano zinc oxide has potential photoxicity and absorption through the skin/lungs.
An in-vitro (done in a test tube or petri dish) study demonstrated micronized zinc oxide to have potential phototoxicity. There's no need to fret; the EU Commission's Scientific Committee on Consumer Safety has stated, "The relevance of these findings needs to be clarified by appropriate investigations in vivo." Or in other words, further studies done on living organisms are needed to prove this.
Current research shows zinc oxide nanoparticles do not penetrate intact or sunburned skin. They either remain on the surface or in the outermost layer of dead skin (stratum corneum).
Zinc oxide is one of only two classified mineral UV filters with titanium dioxide being the other one.
Fun fact: Zinc has been used throughout history as an ingredient in paint and medicine. An Indian text from 500BC is believed to list zinc oxide as a salve for open wound. The Ancient Greek physician Dioscorides has also mentioned the use of zinc as an ointment in 1AD.
Learn more about Zinc Oxide