The Saem Eco Soul Vegan Skin Balance BB Cream

Phenyl Trimethicone is a silicon-based polymer. It is derived from silica.

Phenyl Trimethicone is used as an emollient and prevents products from foaming.

Ethylhexyl Methoxycinnamate is an organic compound that provides UVB protection. It often goes by the more common name of octinoxate. It is created from methoxycinnamic acid and 2-ethylhexanol.

Ethylhexyl Methoxycinnamate absorbs UVB rays with wavelengths between 280-320 nm. UV absorbers protect your skin by using chemical reactions to convert UV rays into heat and energy.

Glycerin is already naturally found in your skin. It helps moisturize and protect your skin.

A study from 2016 found glycerin to be more effective as a humectant than AHAs and hyaluronic acid.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

• It is a solvent, meaning that it helps to dissolve other ingredients. This also enhances the absorption of the product into one's skin.
• It is a humectant, which means that it helps attract moisture into the skin.
• It helps improve product application.
• It has mild preservative properties.

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Dicaprylyl Carbonate comes from carbonic acid and caprylyl alcohol, a fatty alcohol. It is an emollient and gives skin a velvet feel. The sources of Dicaprylyl Carbonate may be synthetic or from animals.

As an emollient, Dicaprylyl Carbonate creates a film on the skin. This film traps moisture in, keeping your skin soft and hydrated.

Zinc Oxide is a mineral broad-spectrum UV filter; it is the broadest UVA and UVB reflector approved by the FDA. While it is most commonly man-made for cosmetics, it can naturally occur in zincite, a rare mineral.

Today, traditional and nano-sized zinc oxide can be found in beauty products. Nano-sized zinc oxide can enhance a product's UV protection. While it is not believed to have a negative effect on skin, nano-zinc oxide may be harmful to coral reefs - though the verdict is not entirely out on this one.

Cyclopentasiloxane, or D5, is a silicone used to improve texture of products and trap moisture.

D5 is considered lightweight and volatile. Volatile means it evaporates quickly after application. Once evaporated, D5 leaves a thin barrier that helps keep skin hydrated.

Butyloctyl Salicylate is similar to octisalate. It a photostabilizer, SPF booster, emollient and solvent. Its main purpose is to evenly spread out ingredients.

This ingredient is a common sunscreen ingredient carrier and photostabilizer. According to a manufacturer, it is suitable for carrying micro Titanium Dioxide, Zinc Oxide, and pigments.

Peg-10 Dimethicone is silicone with conditioner and emulsifier properties. It mostly acts as an emollient in skincare and and humectant in haircare.

According to the manufacturer, acidic formulations decrease the stability of this ingredient. It works best in neutral or near neutral formulations.

This ingredient is more commonly known as Ensulizole, a chemical sunscreen ingredient.

Ensulizole mainly protects UV-B (290-340 nm) but offers a little UV-A (320-400 nm) protection. It is often paired with less photo-stable sunscreen ingredients due to its photo-stability.

Cyclohexasiloxane is a type of silicone more commonly known as D6. It is an emollient and solvent.

Cyclohexasiloxane is used to evenly distribute ingredients throughout the product. When applied to the skin, Cyclohexasiloxane evaporates and leaves behind a silky feel.

Dimethicone is a type of synthetic silicone created from natural materials such as quartz.

What it does:

Niacinamide has emerged as an all-star ingredient due to its many benefits.

It is known to treat acne by reducing inflammation. It also helps fade dark-spots and strengthen the skin by promoting the growth of the ceramide barrier.

Tromethamine helps balance the pH and improve the texture of a product. It is synthetically created.

As an emulsifier, Tromethamine prevents oil and water ingredients from separating. This helps stabilize the product and elongate a product's shelf life. Tromethamine also makes a product thicker.

We don't have a description for Chromium Hydroxide Green yet.

Cetyl Dimethicone is a type of silicone.

Diisostearyl Malate is an emollient and most often used in lip products. It comes from isostearyl alcohol, a fatty acid, and malic acid, an AHA.

As an emollient, Diisostearyl Malate helps create a thin film on your skin to trap moisture in. This helps keep your skin soft and smooth.

Lauryl PEG-8 Dimethicone is a type of silicone.

Octyldodecanol is a fatty alcohol. It is primarily used to enhance the texture of products.

As an emulsifier, Octyldodecanol helps prevent the oils and waters from separating. It also prevents ingredients from creating foam when shaken.

Chances are, you eat sodium chloride every day. Sodium Chloride is also known as table salt.

This ingredient has many purposes in skincare: thickener, emulsifier, and exfoliator.

Disteardimonium Hectorite comes from the clay mineral named hectorite. It is used to add thickness to a product.

It can also help stabilize a product by helping to disperse other ingredients.

Polymethylsilsesquioxane is a silicone used as a film forming agent.

When applied to the skin, this ingredient creates an invisible film on the surface. This film still allows oxygen to pass through, but prevents moisture from escaping. This can help condition and hydrate the skin. It also leaves a silky feel when applied.

Synthetic beeswax is created to be identical in structure to beeswax. It possesses the same occlusive and emulsion properties.

A blend of fatty acid esters, fatty acids, and alcohols are used to create synthetic beeswax. Whether or not this ingredient is vegan depends on the source. Sometimes, lanolin is used for its creation.

Silica is a mineral naturally found in our skin. It helps to thicken and smooth the texture of a product. It also acts as an agent for other ingredients by increasing the absorption of other ingredients into the skin.

Silica is often used for absorption and can help reduce shine when products are applied. Silica occurs in naturally in materials like clay and sandstone, and it can also be produced synthetically.

We don't have a description for Ferric Chloride yet.

Aluminum Hydroxide is a form of aluminum. It can be naturally found in nature as the mineral gibbsite. In cosmetics, Aluminum Hydroxide is used as a colorant, pH adjuster, and absorbent.

As a colorant, Aluminum Hydroxide may add opacity, or reduce the transparency. Aluminum hydroxide is contains both basic and acidic properties.

This ingredient comes from a fatty acid (lauric acid) and amino acid (lysine). It is used to add a silky feel to cosmetics.

According to a manufacturer, its fatty acid base leaves a silky feeling on the skin. It also has emollient properties because of this. Emollients help soften skin by preventing water from evaporating.

Triethoxycaprylylsilane is a silicone used to bind and stabilize ingredients.

As an emulsifier, it helps prevent ingredients from separating. This can help elongate the shelf life of products.

Sodium Benzoate is a preservative. It's used in both cosmetic and food products to inhibit the growth of mold and bacteria. It is typically produced synthetically.

Both the US FDA and EU Health Committee have approved the use of sodium benzoate. In the US, levels of 0.1% (of the total product) are allowed.

Hydrogen Dimethicone is a type of silicone.

Parfum is a catch-all term for an ingredient or more that is used to give a scent to products.

Also called "fragrance", this ingredient can be a blend of hundreds of chemicals or plant oils. This means every product with "fragrance" or "parfum" in the ingredients list is a different mixture.

We don't have a description for Cuprous Oxide yet.

Potassium Sorbate is a preservative used to prevent yeast and mold in products. It is commonly found in both cosmetic and food products.

This ingredient comes from potassium salt derived from sorbic acid. Sorbic acid is a natural antibiotic and effective against fungus.

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Disodium EDTA plays a role in making products more stable by aiding other preservatives.

It is a chelating agent, meaning it neutralizes metal ions that may be found in a product.

Ethylhexylglycerin (we can't pronounce this either) is commonly used as a preservative and skin softener. It is derived from glyceryl.

You might see Ethylhexylglycerin often paired with other preservatives such as phenoxyethanol. Ethylhexylglycerin has been found to increase the effectiveness of these other preservatives.

Adenosine is in every living organism. It is one of four components in nucleic acids that helps store our DNA.

Adenosine has many benefits when used. These benefits include hydrating the skin, smoothing skin, and reducing wrinkles. Once applied, adenosine increases collagen production. It also helps with improving firmness and tissue repair.

We don't have a description for Hydrangea Macrophylla Leaf Extract yet.

1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse. 

It is a:

• Humectant, drawing moisture into the skin
• Emollient, helping to soften skin
• Solvent, dispersing and stabilizing formulas
• Preservative booster, enhancing the antimicrobial activity of other preservatives 

We don't have a description for Hydrolyzed Soy Flour yet.

We don't have a description for Juniperus Chinensis Xylem Extract yet.

We don't have a description for Angelica Tenuissima Root Extract yet.

This flowering plant is more commonly known as Capillary wormwood.

According to a manufacturer, the flowers of this plant are used for their anti-inflammation and moisturizing properties.

We don't have a description for Chamaecyparis Obtusa Leaf Extract yet.

We don't have a description for Cryptomeria Japonica Leaf Extract yet.

Cupressus Sempervirens Leaf Extract is a fragrance.

We don't have a description for Chrysanthemum Zawadskii Extract yet.

We don't have a description for Pinus Palustris Leaf Extract yet.

We don't have a description for Thuja Orientalis Extract yet.

Tocopherol (also known as Vitamin E) is a common antioxidant used to help protect the skin from free-radicals and strengthen the skin barrier. It's also fat soluble - this means our skin is great at absorbing it.

Vitamin E also helps keep your natural skin lipids healthy. Your lipid skin barrier naturally consists of lipids, ceramides, and fatty acids. Vitamin E offers extra protection for your skin’s lipid barrier, keeping your skin healthy and nourished.

Caprylyl Glycol is a humectant and emollient, meaning it attracts and preserves moisture.

It is a common ingredient in many products, especially those designed to hydrate skin. The primary benefits are retaining moisture, skin softening, and promoting a healthy skin barrier.