The Face Shop Power Long-Lasting Sun SPF50+ PA+++

Zinc Oxide is a mineral broad-spectrum UV filter; it is the broadest UVA and UVB reflector approved by the FDA. While it is most commonly man-made for cosmetics, it can naturally occur in zincite, a rare mineral.

Today, traditional and nano-sized zinc oxide can be found in beauty products. Nano-sized zinc oxide can enhance a product's UV protection. While it is not believed to have a negative effect on skin, nano-zinc oxide may be harmful to coral reefs - though the verdict is not entirely out on this one.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

• It is a solvent, meaning that it helps to dissolve other ingredients. This also enhances the absorption of the product into one's skin.
• It is a humectant, which means that it helps attract moisture into the skin.
• It helps improve product application.
• It has mild preservative properties.

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Ethylhexyl Methoxycinnamate is an organic compound that provides UVB protection. It often goes by the more common name of octinoxate. It is created from methoxycinnamic acid and 2-ethylhexanol.

Ethylhexyl Methoxycinnamate absorbs UVB rays with wavelengths between 280-320 nm. UV absorbers protect your skin by using chemical reactions to convert UV rays into heat and energy.

Peg-10 Dimethicone is silicone with conditioner and emulsifier properties. It mostly acts as an emollient in skincare and and humectant in haircare.

According to the manufacturer, acidic formulations decrease the stability of this ingredient. It works best in neutral or near neutral formulations.

Titanium dioxide is known for its UVA and UVB protection properties. It is non-comedogenic and non-irritating. Titanium Dioxide is a physical sunscreen. Physical sunscreens reflect light and prevent it from reaching your skin.

Protecting your skin against UV radiation can prevent the signs of aging. Sun damage is associated with fine-lines, wrinkles, loss of firmness, and hyperpigmentation. Titanium dioxide can help prevent premature aging.

Cyclomethicone is a class of silicones used to improve the texture of products.

Their cyclic or circular structure decreases stability. This causes quick evaporation when applied to skin. Cyclomethicones are often used as a carrier for other ingredients. Once it evaporates, it leaves a silky barrier on the skin.

Dipropylene Glycol is a synthetically created stabilizer and solvent. It is a part of the glycol class in the alcohol family.

Dipropylene Glycol helps dissolve and evenly distribute ingredients. It also helps decrease viscosity and thin out texture.

Ethylhexyl Salicylate is an organic compound used to block UV rays. It primarily absorbs UVB rays but offers a small amount of UVA protection as well.

Commonly found in sunscreens, Ethylhexyl Salicylate is created from salicylic acid and 2-ethylhexanol. You might know salicylic acid as the effective acne fighter ingredient and BHA.

Dimethicone is a type of synthetic silicone created from natural materials such as quartz.

What it does:

We don't have a description for Dimethicone/Methicone Copolymer yet.

Panthenol is a common ingredient that helps hydrate and soothe the skin. It is found naturally in our skin and hair.

There are two forms of panthenol: D and L.

Magnesium Sulfate is a salt. It can be naturally found in sea water or mineral deposits.

In cosmetics, Magnesium Sulfate is used to thicken a product or help dilute other solids. It is a non-reactive and non-irritating ingredient.

Hexyl Laurate isn't fungal acne safe.

This ingredient is an emollient, solvent, and texture enhancer. It is considered a skin-softener by helping the skin prevent moisture loss.

It helps thicken a product's formula and makes it easier to spread by dissolving clumping compounds.

This ingredient is a silicone used to improve the texture of products and absorb oil. It does not get absorbed into the skin.

Like other silicones, Dimethicone/Vinyl Dimethicone Crosspolymer helps condition the skin by creating a barrier. In this sense, it can act as an emollient and trap moisture in.

Disteardimonium Hectorite comes from the clay mineral named hectorite. It is used to add thickness to a product.

It can also help stabilize a product by helping to disperse other ingredients.

Propanediol is an all-star ingredient. It softens, hydrates, and smooths the skin. 

It’s often used to:

Methicone is a type of silicone and is a simpler form of dimethicone.

Silicones are used to enhance the texture of products and have emollient properties. Methicone is used to give products a silky texture and improves spreadability.

Zinc Stearate is the metal salt of stearic acid. It is a white solid used to bind, thicken, and lubricate products.

This ingredient is common in powder makeup, where it helps keep the powder together.

Sorbitan Sesquioleate is derived from sorbitol and oleic acid. It is an emulsifier and prevents ingredients from separating.

Specifically, this ingredient is a water-in-oil emulsifier, meaning it helps water dissolve into oil.

Caprylic/capric glycerides are a mixture of fats from caprylic and capric acids.

As an emollient, Caprylic/Capric Glycerides helps soften and moisturize the skin. Emollients create a moisture-trapping film on the skin.

We don't have a description for Dimethicone/PEG-10/15 Crosspolymer yet.

Alumina is another name for the compound aluminum oxide. It is used as a thickener, absorbent, and abrasive.

As an absorbent, alumina can give a mattifying effect. It is used in mineral sunscreens to help coat nano-sized filters, such as titanium dioxide. By increasing the size of the UV filters, these ingredients stay on the skin for a longer time. By coating small sized ingredients, alumina helps thicken a product.

We don't have a description for Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer yet.

We don't have a description for Distearyldimonium Chloride yet.

Mica refers to a group of silicate minerals. Mica crystals are easily split to give products a shimmer. These crystals are able to reflect light to temporarily give your skin a glowy look.

Mica is found to be safe. Trace amounts of heavy metals may be found in mica, but these metals are not harmful in our personal products.

Nylon-12 is a polymer. It is derived from 12-aminododecanoic acid, an omega-amino fatty acid

According to a manufacturer, it is a talc substitute. Like talc, nylon-12 gives products a satin feel. The manufacturer also claims this ingredients does not block pores and has moderate oil absorption.

We don't have a description for Vp/Eicosene Copolymer yet.

Dipotassium Glycyrrhizate comes from licorice root.

Extracts of licorice have demonstrated to have antibacterial, anti‐inflammatory, antiviral, antioxidant properties.

We don't have a description for Alanyl Glutamine yet.

Caprylhydroxamic Acid is a chelating agent.

Chelating agents help prevent metal ions from binding to other ingredients. This helps prevent unwanted reactions and effects from using the product.

Adenosine is in every living organism. It is one of four components in nucleic acids that helps store our DNA.

Adenosine has many benefits when used. These benefits include hydrating the skin, smoothing skin, and reducing wrinkles. Once applied, adenosine increases collagen production. It also helps with improving firmness and tissue repair.

We don't have a description for Eel Extract yet.

Hydrogen Dimethicone is a type of silicone.

We don't have a description for Trisodium EDTA yet.

Tocopheryl Acetate is AKA Vitamin E. It is an antioxidant and protects your skin from free radicals. Free radicals damage the skin by breaking down collagen.

One study found using Tocopheryl Acetate with Vitamin C decreased the number of sunburned cells.

Sodium Citrate is the sodium salts of citric acid. In skincare, it is used to alter pH levels and acts as a preservative.

Its main functions are to maintain the pH of a product and neutralize metal ions.

Triethoxycaprylylsilane is a silicone used to bind and stabilize ingredients.

As an emulsifier, it helps prevent ingredients from separating. This can help elongate the shelf life of products.

Vanilla Tahitensis Fruit Extract comes from the vanilla plant now cultivated in the South Pacific.

This ingredient is known to sensitize and irritate skin.

We don't have a description for Helianthus Annuus Sprout Extract yet.

We don't have a description for Menthyl PCA yet.

Sodium PCA is the sodium salt of pyroglutamic acid. It is naturally occurring in our skin's natural moisturizing factors where it works to maintain hydration.

The PCA stands for pyrrolidone carboxylic acid, a natural amino acid derivative.

Tocopherol (also known as Vitamin E) is a common antioxidant used to help protect the skin from free-radicals and strengthen the skin barrier. It's also fat soluble - this means our skin is great at absorbing it.

Vitamin E also helps keep your natural skin lipids healthy. Your lipid skin barrier naturally consists of lipids, ceramides, and fatty acids. Vitamin E offers extra protection for your skin’s lipid barrier, keeping your skin healthy and nourished.

Ci 77492 is also hydrated iron III oxide. It's sole purpose is to give a yellow hue to products.

Iron III oxides are classified as inorganic chemicals for coloring.

Ci 77491 is also hydrated iron III oxide. It's sole purpose is to give a red/pink hue to products.

Iron III oxides are classified as inorganic chemicals for coloring.

Ci 77499 is also hydrated iron III oxide. It is created from mixing red and black iron oxides. This helps give shades of darkness to a product.

Iron III oxides are classified as inorganic chemicals for coloring.

Sodium Benzoate is a preservative. It's used in both cosmetic and food products to inhibit the growth of mold and bacteria. It is typically produced synthetically.

Both the US FDA and EU Health Committee have approved the use of sodium benzoate. In the US, levels of 0.1% (of the total product) are allowed.

Parfum is a catch-all term for an ingredient or more that is used to give a scent to products.

Also called "fragrance", this ingredient can be a blend of hundreds of chemicals or plant oils. This means every product with "fragrance" or "parfum" in the ingredients list is a different mixture.