Numbuzin No.2 Rose PDRN Collagen 2X Plumping Serum Versus CeraVe Moisturizing Lotion Dry And Very Dry Skin
What's inside
What's inside
Key Ingredients
Benefits
Concerns
No concerns
Ingredients Side-by-side
Collagen Water
HumectantWater
Skin ConditioningGlycereth-26
HumectantButylene Glycol
HumectantGlycerin
HumectantNiacinamide
SmoothingPropanediol
SolventDipropylene Glycol
Humectant1,2-Hexanediol
Skin ConditioningDiethoxyethyl Succinate
SolventPEG-240/Hdi Copolymer Bis-Decyltetradeceth-20 Ether
StabilisingPolyacrylate Crosspolymer-6
Emulsion StabilisingTrehalose
HumectantOctyldodeceth-16
EmulsifyingMethyl Diisopropyl Propionamide
MaskingGardenia Florida Fruit Extract
Skin ConditioningEthylhexylglycerin
Skin ConditioningSodium Dna
Skin ConditioningRosa Damascena Flower Extract
MaskingPullulan
Polyglyceryl-10 Oleate
Skin ConditioningAdenosine
Skin ConditioningOctyldodecanol
EmollientHydrolyzed Sponge
Skin ConditioningMorus Alba Bark Extract
Skin ConditioningHydrogenated Lecithin
EmulsifyingArtemisia Capillaris Extract
Camellia Sinensis Leaf Extract
AntimicrobialSodium Hyaluronate Crosspolymer
HumectantHydrolyzed Glycosaminoglycans
HumectantDisodium EDTA
Polysorbate 20
EmulsifyingSodium Hyaluronate
HumectantCyanocobalamin
Skin ConditioningLecithin
EmollientTocopherol
AntioxidantPotassium Laurate
EmulsifyingBenzyl Glycol
SolventHyaluronic Acid
HumectantCaprylyl Glycol
EmollientPolylactic Acid
AbrasiveResveratrol
AntioxidantHydrolyzed Hyaluronic Acid
HumectantAcetyl Hexapeptide-1
Skin ConditioningSilica
AbrasivePentaerythrityl Tetraisostearate
EmollientSodium Ascorbyl Phosphate
AntioxidantHydrolyzed Collagen
EmollientAcetyl Hexapeptide-8
HumectantAcetyl Octapeptide-3
HumectantTripeptide-1
Skin ConditioningTripeptide-2
Skin ConditioningPalmitoyl Pentapeptide-4
Skin ConditioningPalmitoyl Tetrapeptide-7
Skin ConditioningCaprylic/Capric Triglyceride
MaskingRaspberry Ketone
MaskingCoptis Chinensis Root Extract
AntioxidantStearalkonium Hectorite
Gel FormingPropylene Carbonate
SolventPalmitoyl Tripeptide-1
Skin ConditioningTripeptide-3
Skin ConditioningCopper Tripeptide-1
Skin ConditioningSh-Oligopeptide-1
Skin ConditioningSh-Polypeptide-1
Skin ConditioningSh-Polypeptide-11
Palmitoyl Hexapeptide-12
Skin ConditioningSh-Polypeptide-22
Skin ConditioningCollagen Water, Water, Glycereth-26, Butylene Glycol, Glycerin, Niacinamide, Propanediol, Dipropylene Glycol, 1,2-Hexanediol, Diethoxyethyl Succinate, PEG-240/Hdi Copolymer Bis-Decyltetradeceth-20 Ether, Polyacrylate Crosspolymer-6, Trehalose, Octyldodeceth-16, Methyl Diisopropyl Propionamide, Gardenia Florida Fruit Extract, Ethylhexylglycerin, Sodium Dna, Rosa Damascena Flower Extract, Pullulan, Polyglyceryl-10 Oleate, Adenosine, Octyldodecanol, Hydrolyzed Sponge, Morus Alba Bark Extract, Hydrogenated Lecithin, Artemisia Capillaris Extract, Camellia Sinensis Leaf Extract, Sodium Hyaluronate Crosspolymer, Hydrolyzed Glycosaminoglycans, Disodium EDTA, Polysorbate 20, Sodium Hyaluronate, Cyanocobalamin, Lecithin, Tocopherol, Potassium Laurate, Benzyl Glycol, Hyaluronic Acid, Caprylyl Glycol, Polylactic Acid, Resveratrol, Hydrolyzed Hyaluronic Acid, Acetyl Hexapeptide-1, Silica, Pentaerythrityl Tetraisostearate, Sodium Ascorbyl Phosphate, Hydrolyzed Collagen, Acetyl Hexapeptide-8, Acetyl Octapeptide-3, Tripeptide-1, Tripeptide-2, Palmitoyl Pentapeptide-4, Palmitoyl Tetrapeptide-7, Caprylic/Capric Triglyceride, Raspberry Ketone, Coptis Chinensis Root Extract, Stearalkonium Hectorite, Propylene Carbonate, Palmitoyl Tripeptide-1, Tripeptide-3, Copper Tripeptide-1, Sh-Oligopeptide-1, Sh-Polypeptide-1, Sh-Polypeptide-11, Palmitoyl Hexapeptide-12, Sh-Polypeptide-22
Water
Skin ConditioningGlycerin
HumectantCaprylic/Capric Triglyceride
MaskingCetearyl Alcohol
EmollientCetyl Alcohol
EmollientDimethicone
EmollientPhenoxyethanol
PreservativePolysorbate 20
EmulsifyingCeteareth-20
CleansingBehentrimonium Methosulfate
SurfactantPolyglyceryl-3 Diisostearate
EmulsifyingSodium Lauroyl Lactylate
EmulsifyingEthylhexylglycerin
Skin ConditioningPotassium Phosphate
BufferingDisodium EDTA
Dipotassium Phosphate
BufferingCeramide NP
Skin ConditioningCeramide AP
Skin ConditioningPhytosphingosine
Skin ConditioningCholesterol
EmollientXanthan Gum
EmulsifyingCarbomer
Emulsion StabilisingSodium Hyaluronate
HumectantTocopherol
AntioxidantCeramide EOP
Skin ConditioningWater, Glycerin, Caprylic/Capric Triglyceride, Cetearyl Alcohol, Cetyl Alcohol, Dimethicone, Phenoxyethanol, Polysorbate 20, Ceteareth-20, Behentrimonium Methosulfate, Polyglyceryl-3 Diisostearate, Sodium Lauroyl Lactylate, Ethylhexylglycerin, Potassium Phosphate, Disodium EDTA, Dipotassium Phosphate, Ceramide NP, Ceramide AP, Phytosphingosine, Cholesterol, Xanthan Gum, Carbomer, Sodium Hyaluronate, Tocopherol, Ceramide EOP
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Caprylic/Capric Triglyceride (aka MCT Oil) is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping to prevent moisture loss.
Though it behaves like an oil, it is not technically one due to its chemical composition. One perk of this ingredient is that it is very stable, resistant to oxidation, and unlikely to go rancid.
In practice, that translates to a long shelf life and a consistently elegant skin feel.
While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Just patch test if you have concerns.
Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.
This ingredient is treated as the gold standard fungal acne safe oil. Even though it is coconut derived, the problematic lauric acid is stripped out.
This leaves just caprylic (C8) and capric (C10) acid. These chain lengths actually trend antifungal; a 2020 study found caprylic acid was enough to disrupt Malassezia furfur cell membrane, with a caprylic acid derivative damaging membrane structures at concentrations as low as 0.2%.
Learn more about Caprylic/Capric TriglycerideDisodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.
This ingredient mainly works behind the scenes and helps with:
On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.
One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).
Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.
You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.
Learn more about Disodium EDTAEthylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Learn more about EthylhexylglycerinGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinPolysorbate 20 is a gentle, water-soluble emulsifier and mild surfactant. It stops oil and water from separating to keep your formulas blended and stable.
It also acts as a mild penetration enhancer by helping active ingredients absorb slightly better.
The common safety discussion around this ingredient involves a manufacturing byproduct called 1,4-dioxane.
Trace amounts can form during production but the EU's Scientific Committee on Consumer Safety has concluded that levels at/below 10 ppm in finished products are safe (commercial products consistently fall within acceptable margins).
True allergic reactions are uncommon and the CIR Expert Panel has confirmed this ingredient to be safe as used in cosmetics.
Because it is derived from lauric acid, it may not be fungal acne safe.
Learn more about Polysorbate 20Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.
In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.
Interestingly, the size of the molecule affects its behavior:
Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.
Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.
You'll typically see concentrations between 0.1-2% for this ingredient.
Learn more about Sodium HyaluronateTocopherol is a fat-soluble antioxidant known as Vitamin E.
You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.
Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.
It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.
This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.
This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.
In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.
Concentrations usually range from 0.1-1% in most leave-on products.
Learn more about TocopherolWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water