This hybrid sunscreen covers the full UV range and blocks ~98% of UVB at SPF 50.

This mineral sunscreen covers the full UV range and blocks ~98% of UVB at SPF 50.

Sunscreen
Sunscreen
Thai Thailand
Thai Thailand

What's inside

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Show highlights for:

Water

Skin Conditioning

Butylene Glycol

Humectant
1 / 0 Helps hydrate Dry Skin IconGood for Barrier Repair Icon

Ethylhexyl Salicylate

UV Absorber
0 / 0 UV Protection IconChemical UV Filter IconNon-Reef-Safe Icon

Ethylhexyl Triazone

UV Absorber
UV Protection IconChemical UV Filter Icon

Diethylamino Hydroxybenzoyl Hexyl Benzoate

UV Filter
Chemical UV Filter Icon

Neopentyl Glycol Diheptanoate

Emollient

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

Skin Conditioning
UV Protection IconChemical UV Filter Icon

Isododecane

Emollient

PEG-20 Glyceryl Triisostearate

Emollient
May worsen Seborrheic Dermatitis IconNot safe for Fungal Acne Icon

Diisopropyl Adipate

Emollient
0 / 0

Propylene Glycol Dicaprylate/Dicaprate

Emollient
1 / 0

Caprylyl Methicone

Skin Conditioning
Silicon Icon

Silica

Abrasive
Exfoliant IconGood for Oily Skin IconGood for Minimizing Pores Icon

Propanediol

Solvent
Helps hydrate Dry Skin IconGood for Barrier Repair Icon

C12-15 Alkyl Benzoate

Antimicrobial

Diisopropyl Sebacate

Emollient

Cyclopentasiloxane

Emollient
Silicon Icon

Titanium Dioxide

Cosmetic Colorant
0 / 0 UV Protection IconMineral UV Filter IconNon-Reef-Safe Icon

Lauroyl Lysine

Skin Conditioning
Good for Oily Skin Icon

Aluminum Starch Octenylsuccinate

Absorbent
Good for Oily Skin Icon

Sorbitan Sesquiisostearate

Emulsifying
May worsen Seborrheic Dermatitis IconNot safe for Fungal Acne Icon

Acrylates/Beheneth-25 Methacrylate Copolymer

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol

UV Filter
Chemical UV Filter Icon

PPG-8-Ceteth-20

Emulsifying

Methylpropanediol

Solvent

Saccharomyces Ferment

Skin Conditioning
Helps hydrate Dry Skin IconMay worsen Seborrheic Dermatitis IconNot safe for Fungal Acne Icon

Caprylic/Capric Triglyceride

Masking
Coconut Derived IconHelps hydrate Dry Skin IconGood for Barrier Repair Icon

Caprylyl Glycol

Emollient
Fatty Alcohol Icon

Stearyl Glycyrrhetinate

Skin Conditioning

Maltodextrin

Absorbent
Helps hydrate Dry Skin Icon

Tocopheryl Acetate

Antioxidant
0 / 0 Vitamin E IconAntioxidant IconHelps brighten skin Icon

Polyquaternium-80

Cleansing

Octocrylene

UV Absorber
UV Protection IconChemical UV Filter IconMay worsen Eczema IconMay cause irritation IconNon-Reef-Safe Icon

Decyl Glucoside

Cleansing
Coconut Derived Icon

Pistacia Lentiscus Gum

Masking

Disodium EDTA

Hydrogenated Lecithin

Emulsifying
Helps hydrate Dry Skin IconGood for Barrier Repair Icon

Didecyldimonium Chloride

Emulsifying

Butyl Methoxydibenzoylmethane

UV Absorber
UV Protection IconChemical UV Filter Icon

Aloe Barbadensis Leaf Water

Masking

Phenethyl Alcohol

Masking

Polysilicone-14

Silicon Icon

Tremella Fuciformis Polysaccharide

Emulsion Stabilising
Helps hydrate Dry Skin IconHelps reduce Skin Redness Icon

Caesalpinia Spinosa Fruit Extract

Skin Protecting

Alteromonas Ferment Extract

Skin Conditioning
Helps reduce irritation Icon

Propylene Glycol

Humectant
0 / 0 Helps hydrate Dry Skin IconMay worsen Eczema IconMay worsen Rosacea Icon

3-Laurylglyceryl Ascorbate

Antioxidant
Antioxidant Icon

Ethylhexylglycerin

Skin Conditioning

Xanthan Gum

Emulsifying

Helianthus Annuus Sprout Extract

Skin Conditioning

Rosa Roxburghii Fruit Extract

Tonic

Camellia Sinensis Leaf Extract

Antimicrobial
Antioxidant IconHelps with Anti-Aging IconHelps hydrate Dry Skin IconHelps brighten skin IconHelps reduce irritation IconGood for Oily Skin IconGood for Minimizing Pores IconHelps reduce Skin Redness Icon

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Humectant, Masking, Skin Conditioning

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Learn more about Butylene Glycol
Antimicrobial, Antioxidant, Astringent

Camellia Sinensis Leaf Extract (tea extract) is one of the most well-researched plant extracts in skincare with an impressive resume.

Black tea, green tea, and oolong tea are all harvested from the Camellia Sinensis plant.

Studies show green tea extract and its catechins (like epigallocatechin gallate (EGCG)) help your skin cells product energy more efficiently and reducing the number of free-radicals that can damage your skin from the inside.

In lab-grown skin models, this translated to younger, healthier, and stronger skin.

There's also good sun protection data; researchers saw less DNA damage and redness on human skin when green tea was applied before UVB exposure. And the more they applied, the better the protection.

Needless to say, this ingredient shouldn't replace your sunscreen. But it is a great supportive ingredient that you can already find in many sunscreens and antioxidant serums.

A 2009 study found a 2% green tea lotion was effective for mild-to-moderate acne thanks to its anti-inflammatory and mild antimicrobial activity.

The quality of the extract matters a lot here:

Good extracts contain 50-90% catechins while lower quality ones are mostly there for marketing. We recommend reaching out to the brand if you have questions about the quality or source of their ingredients.

Human Repeated Insult Patch Testing showed no irritation or sensitization at use concentrations (0.86% in leave-on products and up to 30% as leaf water).

Learn more about Camellia Sinensis Leaf Extract
Skin Conditioning

Caprylyl Methicone is a synthetic and lightweight silicone fluid. It gives products a silky, dry-touch finish without the heaviness of pure oils.

Though the EU CosIng Database lists this ingredient as a skin conditioner, it is also used for sensory reasons. It spreads easily, cuts greasiness, and reduces tackiness.

This ingredient is volatile which means it will mostly evaporate (but it evaporates slower than older cyclomethicones, like Cyclotetrasiloxane).

Typical concentration ranges from 1-30% depending on if it's being used to tweak the feel of a product or acting as the main emollient.

Learn more about Caprylyl Methicone
Emollient, Skin Conditioning, Solvent

Cyclopentasiloxane (D5) is a lightweight silicone that mostly acts as an emollient and solvent in cosmetics. Its the reason your products feel silky, fast-spreading, and non-greasy.

Since D5 is volatile, it does its thing and then evaporates off the skin quickly.

The safety profile of this ingredient is reassuring; the US CIR Expert Panel concluded D5 is safe as used in cosmetics and Health Canada concluded that D5 is not harmful to human health or the environment as currently used in cosmetics

There's a study that people mention about D5 in a rat study showing tumors. This study is related to long-term inhalation of high D5 levels.

Regulatory bodies have judged this study to be not applicable in topical skincare since skin absorption of D5 is very low and we're not really inhaling huge amounts of D5.

The only restriction for this ingredient is environmental. The European Chemicals Agency (ECHA) restricted D5 in wash-off cosmetics at or above 0.1% due to their persistence in water.

Learn more about Cyclopentasiloxane

Disodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.

This ingredient mainly works behind the scenes and helps with:

On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.

One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).

Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.

You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.

Learn more about Disodium EDTA
Skin Conditioning

This ingredient comes from a fatty acid (lauric acid) and amino acid (lysine). It is used to add a silky feel to cosmetics.

According to a manufacturer, its fatty acid base leaves a silky feeling on the skin. It also has emollient properties because of this. Emollients help soften skin by preventing water from evaporating.

Lauroyl lysine is barely soluble in water.

Learn more about Lauroyl Lysine
Emollient, Skin Conditioning

Neopentyl Glycol Diheptanoate is a lightweight synthetic emollient that also helps improve how a product feels and spreads.

In a formula, it's a workhorse that:

The Cosmetic Ingredient Review panel has concluded this ingredient to be safe in cosmetics and found to be a non-ocular (eye) irritant at 100% in rabbits.

Usage levels vary depending on product type; industry surveys report it around 2.2% in baby products, 19.5% in hair sprays, and 1-20% in skincare.

Learn more about Neopentyl Glycol Diheptanoate
Solvent

Propanediol is an all-star ingredient. It softens, hydrates, and smooths the skin. 

It’s often used to:

Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.

Learn more about Propanediol
Abrasive, Absorbent

Silica, also known as silicon dioxide, is a naturally occurring mineral. It is used as a fine, spherical, and porous powder in cosmetics.

Though it has exfoliant properties, the function of silica varies depending on the product.

The unique structure of silica enhances the spreadability and adds smoothness, making it a great texture enhancer.

It is also used as an active carrier, emulsifier, and mattifier due to its ability to absorb excess oil.

In some products, tiny microneedles called spicules are made from silica or hydrolyzed sponge. When you rub them in, they lightly polish away dead skin layers and enhance the penetration of active ingredients.

Learn more about Silica
Cosmetic Colorant, UV Absorber, UV Filter

Titanium Dioxide (TD) is a mineral UV filter widely used in sunscreens and cosmetics.

It's one of only two UV filters officially classified as "mineral" by regulatory agencies (the other being Zinc Oxide).

A really common myth is that mineral filters work by reflecting UV light off your skin like tiny mirrors.

They don't only do that; modern research shows TD protects mostly by absorbing UV radiation, the same way chemical filters do.

When researchers measured this, reflection accounted for only about 4-5% of the protection (and less than SPF 2 on its own). The other ~95% comes from absorption: the UV photons hit the particle and their energy gets soaked up by its semiconductor band gap rather than bouncing off.

So "reflects vs. absorbs" was never really the right way to split mineral from chemical filters.

TD gives broad-spectrum protection that's strongest in the UVB and UVA-2 range and weaker in the UVA-1 range. Its UVA protection isn't quite as strong as Zinc Oxide's which is why you'll often see the two paired together.

Together, they make a solid broad-spectrum system.

TD is a great pick for sensitive, acne-prone, or redness-prone skin because it's non-irritating and chemically inert. Regulatory reviews classify it as a non-sensitizer and mild-to-non-irritant.

It's also unlikely to cause the "eye sting" some chemical filters are known for.

The main trade-off is cosmetic; TD can leave a white cast and has a thicker texture. This is why mineral sunscreens are often less cosmetically elegant than chemical or hybrid formulas (and harder to shade-match on deeper skin tones).

Formulators often use micronized or nano-sized TD to cut down on white case and improve spreadability. Smaller particles scatter less visible light so the formula looks less chalky while still filtering UV.

TD is almost always bundled with coatings like Alumina, Silica, Stearic Acid, or Dimethicone. These coatings do two important jobs:

TD can be used at up to 25% in a finished sunscreen; this is the regulatory ceiling in both the US and the EU.

In practice, the amount in any given product varies a lot depending on the target SPF and whether it's paired with other UV filters.

TD is one of the most heavily vetted sunscreen ingredients out there. It is approved as a UV filter in all major markets worldwide, including the US, EU, UK, Japan, Korea, China, Australia, and Canada.

The safety evidence is solid. There was an old worry that nano particles might absorb through skin into the body but multiple studies (including on damaged, sunburned, and UV-irradiated skin) have shown that TD stays on the surface and the layer of dead skin cells on top of everything else.

There's also no evidence of carcinogenicity, mutagenicity, or reproductive toxicity from dermal exposure of this ingredient.

For those who have seen the headline about a 2022 EU ban on TD, that was on TD as a food additive (a complete separate use from topical sunscreen).

There are ongoing questions about how nano-TD might affect marine ecosystems. As of now, there has been no conclusive evidence that any form of TD (or any other sunscreen filter) harms coral reefs or marine life.

The science is still developing and it's a space worth watching rather than packing over.

However, several destinations have reef-safety sunscreen rules that restrict certain chemical filters and steer visitors toward mineral, non-nano options. If you're traveling somewhere with these rules, a non-nano mineral sunscreen is the safe bet.

Learn more about Titanium Dioxide
Antioxidant, Skin Conditioning

Tocopheryl Acetate is a stable, shelf-friendly form of vitamin E.

Formulators love it because plain vitamin E oxidizes quickly once it hits air. This acetate version stays stable and resists going off, helping to extend a product's shelf life.

It's actually inactive on its own and works like a slow-release "storage" form; the enzymes in your skin called esterases gradually convert it into active vitamin E over time.

One in vivo study showed 5% of the acetate in the living layer of the epidermis converted to vitamin E after 5 days of application. This study also found the skin gained protection against UV damage even though the conversion was slow and small.

Once converted, vitamin E acts as a skin's main fat-soluble antioxidant that fights free radicals to protect skin from damage.

Topical vitamin E generally boosts the skin's photoprotection, and it reduced UV-damage in animal models.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

Overall, it has a pretty solid safety profile and has been found to be non-irritating and non-comedogenic. Allergic reactions may happen but stay rare due to how widely the ingredient gets used.

The concentration will vary depending on the formula; industry data shows 0.1% in baby lotions, 3% in lipsticks, and 5% in foot powders. You can also find this ingredient at 100% in a pure vitamin E oil.

Most leave-on skincare keeps it at the lower end, often between 0.5-1%.

Learn more about Tocopheryl Acetate
Skin Conditioning, Solvent

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Learn more about Water

Similar Comparisons