What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningCetyl Alcohol
EmollientBehentrimonium Chloride
PreservativeCyclopentasiloxane
EmollientCetyl Esters
EmollientCetearyl Alcohol
EmollientParfum
MaskingStearyl Alcohol
EmollientCetrimonium Chloride
AntimicrobialCyclohexasiloxane
EmollientHydroxyethylcellulose
Emulsion StabilisingPhenoxyethanol
PreservativeIsopropyl Alcohol
SolventAmodimethicone
Dimethicone
EmollientVitis Vinifera Seed Oil
EmollientTocopheryl Acetate
AntioxidantArgania Spinosa Kernel Oil
EmollientPanthenol
Skin ConditioningDisodium EDTA
Ethylhexylglycerin
Skin ConditioningCitric Acid
BufferingSodium Acetate
BufferingTrideceth-12
EmulsifyingHydrolyzed Keratin
HumectantSodium PCA
HumectantSodium Lactate
BufferingCellulose
AbsorbentArginine
MaskingAspartic Acid
MaskingGlycerin
HumectantPCA
HumectantPotassium Sorbate
PreservativeGlycine
BufferingAlanine
MaskingCI 15985
Cosmetic ColorantCI 19140
Cosmetic ColorantSerine
MaskingValine
MaskingThreonine
Isoleucine
Skin ConditioningProline
Skin ConditioningBambusa Arundinacea Stem Extract
Skin ConditioningPhenylalanine
MaskingHistidine
HumectantSodium Benzoate
MaskingWater, Cetyl Alcohol, Behentrimonium Chloride, Cyclopentasiloxane, Cetyl Esters, Cetearyl Alcohol, Parfum, Stearyl Alcohol, Cetrimonium Chloride, Cyclohexasiloxane, Hydroxyethylcellulose, Phenoxyethanol, Isopropyl Alcohol, Amodimethicone, Dimethicone, Vitis Vinifera Seed Oil, Tocopheryl Acetate, Argania Spinosa Kernel Oil, Panthenol, Disodium EDTA, Ethylhexylglycerin, Citric Acid, Sodium Acetate, Trideceth-12, Hydrolyzed Keratin, Sodium PCA, Sodium Lactate, Cellulose, Arginine, Aspartic Acid, Glycerin, PCA, Potassium Sorbate, Glycine, Alanine, CI 15985, CI 19140, Serine, Valine, Threonine, Isoleucine, Proline, Bambusa Arundinacea Stem Extract, Phenylalanine, Histidine, Sodium Benzoate
Water
Skin ConditioningGlycerin
HumectantIsopropyl Myristate
EmollientBehentrimonium Chloride
PreservativeCetyl Alcohol
EmollientGlyceryl Stearate
EmollientDimethicone
EmollientQuaternium-80
Amodimethicone
Ethylhexyl Methoxycinnamate
UV AbsorberOlea Europaea Husk Oil
Skin ConditioningParfum
MaskingPhenoxyethanol
PreservativeIsopropyl Alcohol
SolventTriethanolamine
BufferingHexylene Glycol
EmulsifyingHoney
HumectantPEG-100 Stearate
SurfactantCitric Acid
BufferingDMDM Hydantoin
PreservativeHydrolyzed Silk
HumectantCetrimonium Chloride
AntimicrobialTrideceth-12
EmulsifyingEthylhexylglycerin
Skin ConditioningFructose
HumectantGlucose
HumectantPropylene Glycol
HumectantHydrolyzed Hyaluronic Acid
HumectantTocopheryl Acetate
AntioxidantCI 77220
Cosmetic ColorantSodium Hyaluronate
HumectantLactic Acid
BufferingDextrin
AbsorbentSucrose
HumectantUrea
BufferingAspartic Acid
MaskingGlutamic Acid
HumectantHexyl Nicotinate
EmollientWater, Glycerin, Isopropyl Myristate, Behentrimonium Chloride, Cetyl Alcohol, Glyceryl Stearate, Dimethicone, Quaternium-80, Amodimethicone, Ethylhexyl Methoxycinnamate, Olea Europaea Husk Oil, Parfum, Phenoxyethanol, Isopropyl Alcohol, Triethanolamine, Hexylene Glycol, Honey, PEG-100 Stearate, Citric Acid, DMDM Hydantoin, Hydrolyzed Silk, Cetrimonium Chloride, Trideceth-12, Ethylhexylglycerin, Fructose, Glucose, Propylene Glycol, Hydrolyzed Hyaluronic Acid, Tocopheryl Acetate, CI 77220, Sodium Hyaluronate, Lactic Acid, Dextrin, Sucrose, Urea, Aspartic Acid, Glutamic Acid, Hexyl Nicotinate
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
This water-soluble silicone is used for its hydrating and softening properties. It is used to add a silky feel to skincare products and has great benefits for haircare.
In haircare, this ingredient:
- Adds shine
- Protects color
- Offers thermal protection
- Boosts hair strength
- Does not build up as easily
Aspartic Acid is an amino acid that our bodies produce naturally. It is an antioxidant.
Our body uses Aspartic Acid to help build collagen and elastin. It also plays a role in hydrating skin.
This ingredient is a preservative and often used for it's anti-static properties. You'll most likely see this ingredient in hair conditioners.
It does not cause irritation or sensitization in leave-on products at 1-5%.
This ingredient is a preservative, antimicrobial, and emulsifier. It is often used in cosmetics for its ability to cleanse, condition, and reduce static.
Cetrimonium chloride is a quaternary ammonium salt, meaning it has a water-soluble structure.
Cetyl Alcohol is a fatty alcohol. Fatty Alcohols are most often used as an emollient or to thicken a product.
Its main roles are:
Though it has "alcohol" in the name, it is not related to denatured alcohol or ethyl alcohol.
The FDA allows products labeled "alcohol-free" to have fatty alcohols.
This ingredient may not be fungal acne safe. It is a primary fatty alcohol with a chain length above 12 carbons. A study from 2019 show Malassezia can feed on fatty alcohols in this range, so it may trigger fungal acne in those prone to it.
Learn more about Cetyl AlcoholCitric Acid is an alpha hydroxy acid (AHA) naturally found in citrus fruits like oranges, lemons, and limes.
Like other AHAs, citric acid can exfoliate skin by breaking down the bonds that hold dead skin cells together. This helps reveal smoother and brighter skin underneath.
However, this exfoliating effect only happens at high concentrations (20%) which can be hard to find in cosmetic products.
Due to this, citric acid is usually included in small amounts as a pH adjuster. This helps keep products slightly more acidic and compatible with skin's natural pH.
In skincare formulas, citric acid can:
While it can provide some skin benefits, research shows lactic acid and glycolic acid are generally more effective and less irritating exfoliants.
Most citric acid used in skincare today is made by fermenting sugars (usually from molasses). This synthetic version is identical to the natural citrus form but easier to stabilize and use in formulations.
Read more about some other popular AHA's here:
Learn more about Citric AcidDimethicone is a type of synthetic silicone created from natural materials such as quartz. It is also known as polydimethylsiloxane.
What it does:
Dimethicone comes in different viscosities:
Depending on the viscosity, dimethicone has different properties.
Ingredients lists don't always show which type is used, so we recommend reaching out to the brand if you have questions about the viscosity.
This ingredient is unlikely to cause irritation because it does not get absorbed into skin. However, people with silicone allergies should be careful about using this ingredient.
Note: Dimethicone may contribute to pilling. This is because it is not oil or water soluble, so pilling may occur when layered with products. When mixed with heavy oils in a formula, the outcome is also quite greasy.
Learn more about DimethiconeEthylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Learn more about EthylhexylglycerinGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinIsopropyl Alcohol is more commonly known as rubbing alcohol. It is most commonly used as a solvent, meaning it helps other ingredients dissolve.
This ingredient is an astringent alcohol. Astringent alcohols may also irritate skin as they high amounts may strip away your skin's natural oils.
Other types of astringent alcohols include:
According to the National Rosacea Society based in the US, you should be mindful of products with these alcohols in the top half of ingredients.
Any type of sanitizing product will have high amounts of alcohol to help kill bacteria and viruses.
Learn more about Isopropyl AlcoholParfum is a catch-all term for an ingredient or more that is used to give a scent to products.
Also called "fragrance", this ingredient can be a blend of hundreds of chemicals or plant oils. This means every product with "fragrance" or "parfum" in the ingredients list is a different mixture.
For instance, Habanolide is a proprietary trade name for a specific aroma chemical. When used as a fragrance ingredient in cosmetics, most aroma chemicals fall under the broad labeling category of “FRAGRANCE” or “PARFUM” according to EU and US regulations.
The term 'parfum' or 'fragrance' is not regulated in many countries. In many cases, it is up to the brand to define this term.
For instance, many brands choose to label themselves as "fragrance-free" because they are not using synthetic fragrances. However, their products may still contain ingredients such as essential oils that are considered a fragrance by INCI standards.
One example is Calendula flower extract. Calendula is an essential oil that still imparts a scent or 'fragrance'.
Depending on the blend, the ingredients in the mixture can cause allergies and sensitivities on the skin. Some ingredients that are known EU allergens include linalool and citronellol.
Parfum can also be used to mask or cover an unpleasant scent.
The bottom line is: not all fragrances/parfum/ingredients are created equally. If you are worried about fragrances, we recommend taking a closer look at an ingredient. And of course, we always recommend speaking with a professional.
Learn more about ParfumPhenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).
It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.
On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.
Another perk of this ingredient is that it stays functional across a wide pH range (3-10).
You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.
Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.
Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.
Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.
Learn more about PhenoxyethanolTocopheryl Acetate is a stable, shelf-friendly form of vitamin E.
Formulators love it because plain vitamin E oxidizes quickly once it hits air. This acetate version stays stable and resists going off, helping to extend a product's shelf life.
It's actually inactive on its own and works like a slow-release "storage" form; the enzymes in your skin called esterases gradually convert it into active vitamin E over time.
One in vivo study showed 5% of the acetate in the living layer of the epidermis converted to vitamin E after 5 days of application. This study also found the skin gained protection against UV damage even though the conversion was slow and small.
Once converted, vitamin E acts as a skin's main fat-soluble antioxidant that fights free radicals to protect skin from damage.
Topical vitamin E generally boosts the skin's photoprotection, and it reduced UV-damage in animal models.
This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.
Overall, it has a pretty solid safety profile and has been found to be non-irritating and non-comedogenic. Allergic reactions may happen but stay rare due to how widely the ingredient gets used.
The concentration will vary depending on the formula; industry data shows 0.1% in baby lotions, 3% in lipsticks, and 5% in foot powders. You can also find this ingredient at 100% in a pure vitamin E oil.
Most leave-on skincare keeps it at the lower end, often between 0.5-1%.
Learn more about Tocopheryl AcetateWe don't have a description for Trideceth-12 yet.
Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water