GLAMGLOW THIRSTYMUD™ Hydrating Treatment Mask Ingredients Explained

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

• It is a solvent, meaning that it helps to dissolve other ingredients. This also enhances the absorption of the product into one's skin.
• It is a humectant, which means that it helps attract moisture into the skin.
• It helps improve product application.

Overall, Butylene Glycol is a safe and well-rounded ingredient. It is unlikely to irritate skin, and works well with pretty much all other ingredients.

Cyclopentasiloxane is a silicone used to improve texture and trap moisture. An easier name for this is D5.

D5 is considered lightweight and volatile. Volatile means it evaporates quickly after application. Once evaporated, D5 leaves a thin barrier that helps keep skin hydrated.

We don't have a description for Glyceryl Polymethacrylate.

Pyrus Malus Fruit Extract is extract from Apples. Apples are rich in Vitamin C, sugars, and antioxidants.

The sugar in Apples are humectants and help hydrate the skin. On top of that, apples also contain some acids, such as malic acid. These acids may have a mild exfoliating effect.

PEG-8 is a synthetic polymer used as a humectant and solvent.

This ingredient is able to help dissolve active ingredients, including water. This gives it humectant properties.

Glyceryl Stearate is a mix of glycerin and stearic acid.

Glyceryl Stearate is used to stabilize the mixing of water and oil ingredients. By preventing these ingredients from separating, it can help elongate shelf life. It can also help thicken the product's texture.

Peg-100 Stearate is an emollient and emulsifier. PEGS are a hydrophilic polyether compound . There are 100 ethylene oxide monomers in Peg-100 Stearate. Peg-100 Stearate is polyethylene glycol ester of stearic acid.

Peg-100 Stearate helps keep skin soft by trapping moisture in. It helps prevent oil and water from separating in a product. By binding oil and water, it helps remove dirt and oil to be rinsed away.

Cetearyl alcohol is a mixture of two fatty alcohols: cetyl alcohol and stearyl alcohol. It is mainly used as an emulsifier. Emulsifiers help prevent the separation of oils and products. Due to its composition, it can also be used to thicken a product or help create foam.

Cetearyl alcohol is an emollient. Emollients help soothe and hydrate the skin by trapping moisture.

Sodium Polyacryloyldimethyl Taurate is a polymer and used to help stabilize other ingredients.

Emulsion stabilizers hold ingredients together, helping to create an even texture throughout the product.

Saccharide Isomerate comes from sugars found in corn. It is altered so the structure is more similar to the carbohydrates found in our skin. Its ability to match these carbohydrates makes it a great moisturizer and humectant.

Humectants help draw moisture from the air to our skin. Studies show Saccharide Isomerate to be an effective moisturizer.

Caprylyl Glycol is a humectant and emollient, meaning it attracts and preserves moisture.

It is a common ingredient in many products, especially those designed to hydrate skin. The primary benefits are retaining moisture, skin softening, and promoting a healthy skin barrier.

Olea Europaea Leaf Powder is an exfoliant.

Avena Sativa Bran Extract comes from oatmeal. The bran is the shell covering the oat.

This ingredient is an abrasive, meaning it exfoliates the top layer of your skin.

Hydrogenated Polydecene is an emollient. It creates a non-occlusive film on the skin that offers extra protection for your skin barrier.

The texture of Hydrogenated Polydecene ranges from light and silky to rich.

Polysorbate 60 is used to help stabilize products. It is a surfactant and emulsifier. These properties help keep ingredients together in a product. Surfactants help reduce surface tension between ingredients with different states, such as liquids and solids. Emulsifiers help prevent oils and waters from separating.

Polysorbate 60 is sorbitol-based and created from the ethoxylation of sorbitan. Ethoxylation is a chemical reaction used to add ethylene oxide. Sorbitan is a the dehydrated version of sorbitol, a sugar found in fruits.

Cetyl Alcohol is a fatty alcohol. Fatty Alcohols are most often used as an emollient or to thicken a product.

Cetyl Alcohol is not related to SD alcohol, denatured alcohol, or ethyl alcohol. The FDA allows products labeled "alcohol-free" to have fatty alcohols.

Zingiber Officinale is more commonly known as ginger.

Ginger root has antioxidant, anti-inflammation, and antimicrobial properties.

Menthoxypropanediol can cause irritation.

Honey comes from bees. It is mainly made up of fructose and glucose. Honey also contains amino acids, peptides, Vitamins A, C, and E. Vitamins A, C, and E all offer numerous skin benefits.

Honey is hydrating, antibacterial, anti-aging, and skin soothing.

Aminomethyl Propanol is used to adjust the pH of products. It is also used as a base to create other organic compounds. Having a balanced pH is important for protecting your skin.

Aminomethyl propanol is safe to use in cosmetics up to 1%. It is soluble in water.

Camellia Sinensis Leaf is the leaf of the tea plant. These leaves are used to make white, oolong, green, and black tea.

Tea leaves have many benefits. It contains polyphenols, a strong antioxidant. Antioxidants help fight off free-radical molecules that damage skin cells. The antioxidants in green tea neutralize free-radicals from the sun. This gives the skin some extra UV protection, but should not replace sunscreen.

Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic polymer. It is used to thicken and improve the texture of products.

Acrylates/C10-30 Alkyl Acrylate Crosspolymer is also an emulsifier. Due to its properties, it can prevent water and oil ingredients from separating.

Ethylhexylglycerin (we can't pronounce this either) is commonly used as a preservative and skin softener. It is derived from glyceryl.

You might see Ethylhexylglycerin often paired with other preservatives such as phenoxyethanol. Ethylhexylglycerin has been found to increase the effectiveness of these other preservatives.

Tocopheryl Acetate is AKA Vitamin E. It is an antioxidant and protects your skin from free radicals. Free radicals damage the skin by breaking down collagen.

One study found using Tocopheryl Acetate with Vitamin C decreased the number of sunburned cells.

Allantoin plays a role in soothing and moisturizing the skin. Because of this, it is often added to products with strong active ingredients.

Some studies have shown this ingredient can promote wound healing with higher concentrations.

Kaolin is a clay. It is used for oil control and to help minimize pores. Like other clays, kaolin has the ability to absorb excess sebum or oil. This can help clean out pores and mattify the skin.

Some types of kaolin may have exfoliating properties. When water is added to kaolin, it becomes a paste with small abrasive particles.

Hexylene Glycol is a surfactant. Glycols are a class of alcohols. Hexylene Glycol is a surfactant and emulsifier.

As a surfactant, Hexylene Glycol helps gather dirt and oil on your skin to be washed away.

We don't have a description for Buteth-3.

We don't have a description for Trideceth-10.

Benzophenone-4 is a water-soluble chemical sunscreen.

It protects in the UV-B range, but is considered a secondary UV absorber. This means that it needs to be paired with other sunscreen ingredients to provide effective protection.

We don't have a description for Sodium Benzotriazolyl Butylphenol Sulfonate.

Cocos Nucifera Fruit Extract comes from the meat of the coconut fruit. It is an emollient and skin conditioner with antioxidant properties.

Coconut fruit is naturally rich in amino acids, sugars, and nutrients including Vitamin C and small amounts of vitamin B. Malic acid can also be found in coconut fruit extract.

Sodium Hyaluronate is hyaluronic acid's salt form. It is commonly derived from the sodium salt of hyaluronic acid.

Like hyaluronic acid, it is great at holding water and acts as a humectant. This makes it a great skin hydrating ingredient.

Alcohol comes in many different forms. Different types of alcohol will have different effects on skin. This ingredient is usually an astringent alcohol.

These alcohols are drying on the skin. They may strip away your skin's natural oils and even damage your skin barrier. Astringent alcohols may also irritate skin.

We don't have a description for Tristearyl Citrate.

Parfum is a catch-all term for an ingredient or more that is used to give aroma to products. Parfum, or fragrance, can be a blend of hundreds of chemicals or plant oils. This means every product with "fragrance" or "Parfum" in the ingredients list is a different mixture.

In the US, the alternative name for parfum is 'fragrance'. The term 'fragrance' is not regulated in many countries. In many cases, it is up to the brand to define this term.

Coumarins are a group of substances found naturally in plants. There are over 1300 types of coumarins identified. It has a natural vanilla scent.

Coumarin is an identified EU known allergy, meaning it may cause an allergic reaction when applied to the skin.

Linalool is a fragrance and helps add scent to products. It's derived from common plants such as cinnamon, mint, citrus, and lavender.

Linalool has the same effect as Limonene when exposed to air. Oxidized linalool can cause allergies and skin sensitivity.

Ascorbyl Tetraisopalmitate is a version of ascorbic acid, or pure Vitamin C.

Ascorbyl Tetraisopalmitate has many benefits including reducing wrinkles, skin soothing, dark spot fading, and fighting against free radicals.

Disodium EDTA plays a role in making products more stable by aiding other preservatives.

It is a chelating agent, meaning it neutralizes metal ions that may be found in a product.

Sodium Benzoate is a preservative. It's used in both cosmetic and food products to inhibit the growth of mold and bacteria. It is typically produced synthetically.

Both the US FDA and EU Health Committee have approved the use of sodium benzoate. In the US, levels of 0.1% (of the total product) are allowed.

Potassium Sorbate is a preservative used to prevent yeast and mold in products. It is commonly found in both cosmetic and food products.

Potassium sorbate is potassium salt derived from sorbic acid. Sorbic acid is a natural antibiotic and effective against fungus.

Phenoxyethanol is a preservative that has germicide, antimicrobial, and aromatic properties. Studies show that phenoxyethanol can prevent germ and microbial growth. By itself, it has a scent that is similar to that of a rose.

It's often used in formulations along with Caprylyl Glycol to preserve the shelf life of products.