Mistine Aqua Base Ultra Protection Matte & Light Facial Sunscreen Pro SPF 50 Versus Nivea UV Super Water Gel SPF 50 PA+++
This hybrid sunscreen covers the full UV range and blocks ~98% of UVB at SPF 50.
This chemical sunscreen covers most of the UV range, lighter on the deep UVA that drives aging.
What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningOctocrylene
UV AbsorberHomosalate
Skin ConditioningDimethicone
EmollientIsohexadecane
EmollientButyl Methoxydibenzoylmethane
UV AbsorberSilica
AbrasiveEthylhexyl Salicylate
UV AbsorberButylene Glycol
HumectantCyclopentasiloxane
EmollientDibutyl Adipate
EmollientPhenylbenzimidazole Sulfonic Acid
UV AbsorberMethylene Bis-Benzotriazolyl Tetramethylbutylphenol
UV FilterTitanium Dioxide
Cosmetic ColorantBis-Ethylhexyloxyphenol Methoxyphenyl Triazine
UV AbsorberCistus Monspeliensis Extract
MaskingHydrolyzed Pea Protein
EmollientErgothioneine
AntioxidantEctoin
Skin ConditioningNephelium Lappaceum Peel Extract
Skin ConditioningStearalkonium Hectorite
Gel FormingTricholoma Matsutake Extract
Skin ConditioningOryza Sativa Bran Extract
Skin ConditioningMaltodextrin
AbsorbentTocopheryl Acetate
AntioxidantTocopherol
AntioxidantGlucose
HumectantGlycerin
HumectantDicaprylyl Carbonate
EmollientCetearyl Alcohol
EmollientPotassium Phosphate
BufferingGlyceryl Stearate
EmollientPEG-100 Stearate
SurfactantPolyacrylate Crosspolymer-6
Emulsion StabilisingAcrylates Copolymer
Carbomer
Emulsion StabilisingSodium Hydroxide
BufferingPhenoxyethanol
PreservativeDisodium EDTA
Decyl Glucoside
CleansingDimethicone Crosspolymer
Emulsion StabilisingPropylene Glycol
HumectantXanthan Gum
EmulsifyingSodium Stearoyl Glutamate
CleansingPropylene Carbonate
SolventPentylene Glycol
Skin ConditioningEthylhexylglycerin
Skin ConditioningSodium Chloride
MaskingSodium Succinate
BufferingWater, Octocrylene, Homosalate, Dimethicone, Isohexadecane, Butyl Methoxydibenzoylmethane, Silica, Ethylhexyl Salicylate, Butylene Glycol, Cyclopentasiloxane, Dibutyl Adipate, Phenylbenzimidazole Sulfonic Acid, Methylene Bis-Benzotriazolyl Tetramethylbutylphenol, Titanium Dioxide, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, Cistus Monspeliensis Extract, Hydrolyzed Pea Protein, Ergothioneine, Ectoin, Nephelium Lappaceum Peel Extract, Stearalkonium Hectorite, Tricholoma Matsutake Extract, Oryza Sativa Bran Extract, Maltodextrin, Tocopheryl Acetate, Tocopherol, Glucose, Glycerin, Dicaprylyl Carbonate, Cetearyl Alcohol, Potassium Phosphate, Glyceryl Stearate, PEG-100 Stearate, Polyacrylate Crosspolymer-6, Acrylates Copolymer, Carbomer, Sodium Hydroxide, Phenoxyethanol, Disodium EDTA, Decyl Glucoside, Dimethicone Crosspolymer, Propylene Glycol, Xanthan Gum, Sodium Stearoyl Glutamate, Propylene Carbonate, Pentylene Glycol, Ethylhexylglycerin, Sodium Chloride, Sodium Succinate
Water
Skin ConditioningEthylhexyl Methoxycinnamate
UV AbsorberAlcohol Denat.
AntimicrobialPropylene Glycol
HumectantDimethicone
EmollientEthylhexyl Triazone
UV AbsorberDiethylamino Hydroxybenzoyl Hexyl Benzoate
UV FilterButylene Glycol
HumectantLysine Lauroyl Glutamate
CleansingPyrus Cydonia Seed Extract
MaskingGeranium Robertianum Extract
AstringentPhellodendron Amurense Bark Extract
Skin ConditioningSodium Hyaluronate
HumectantAcrylates/C10-30 Alkyl Acrylate Crosspolymer
Emulsion StabilisingCarbomer
Emulsion StabilisingTocopheryl Acetate
AntioxidantSodium Hydroxide
BufferingBHT
AntioxidantMethylparaben
PreservativeWater, Ethylhexyl Methoxycinnamate, Alcohol Denat., Propylene Glycol, Dimethicone, Ethylhexyl Triazone, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Butylene Glycol, Lysine Lauroyl Glutamate, Pyrus Cydonia Seed Extract, Geranium Robertianum Extract, Phellodendron Amurense Bark Extract, Sodium Hyaluronate, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Carbomer, Tocopheryl Acetate, Sodium Hydroxide, BHT, Methylparaben
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:
Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
Learn more about Butylene GlycolCarbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.
Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.
It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.
Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.
A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.
Learn more about CarbomerDimethicone is a type of synthetic silicone created from natural materials such as quartz. It is also known as polydimethylsiloxane.
What it does:
Dimethicone comes in different viscosities:
Depending on the viscosity, dimethicone has different properties.
Ingredients lists don't always show which type is used, so we recommend reaching out to the brand if you have questions about the viscosity.
This ingredient is unlikely to cause irritation because it does not get absorbed into skin. However, people with silicone allergies should be careful about using this ingredient.
Note: Dimethicone may contribute to pilling. This is because it is not oil or water soluble, so pilling may occur when layered with products. When mixed with heavy oils in a formula, the outcome is also quite greasy.
Learn more about DimethiconePropylene Glycol is a synthetic, colorless, odorless liquid that has been a staple in cosmetics for decades. It is a skin conditioning agent, humectant, and solvent.
As a humectant, it draw water to the skin to reduce flaking and restore suppleness. It's also a solvent that helps dissolve other actives and keeps formulas stable across temperature changes.
The CIR Expert Panel has confirmed this ingredient to be nontoxic and clinical studies show no sensitization at cosmetic use concentrations.
True allergic reactions are quite rare: a 15-year retrospective study of 6,751 patients found only 0.31% had a positive reaction (and less than half were considered clinically relevant).
It seemed that when sensitization does occur, it's most commonly linked to topical medication (like corticosteroids) and not cosmetics. Allergic contact dermatitis also appears largely limited to individuals with underlying skin conditions.
Overall, propylene glycol is a well-studied ingredient that most people can tolerate without issue.
Learn more about Propylene GlycolSodium Hydroxide is also known as lye or caustic soda. It is used to adjust the pH of products; many ingredients require a specific pH to be effective.
In small amounts, sodium hydroxide is considered safe to use. However, large amounts may cause chemical burns due to its high alkaline.
Your skin has a natural pH and acid mantle. This acid mantle helps prevent harmful bacteria from breaking through. The acid mantle also helps keep your skin hydrated.
"Alkaline" refers to a high pH level. A low pH level would be considered acidic.
Learn more about Sodium HydroxideTocopheryl Acetate is a stable, shelf-friendly form of vitamin E.
Formulators love it because plain vitamin E oxidizes quickly once it hits air. This acetate version stays stable and resists going off, helping to extend a product's shelf life.
It's actually inactive on its own and works like a slow-release "storage" form; the enzymes in your skin called esterases gradually convert it into active vitamin E over time.
One in vivo study showed 5% of the acetate in the living layer of the epidermis converted to vitamin E after 5 days of application. This study also found the skin gained protection against UV damage even though the conversion was slow and small.
Once converted, vitamin E acts as a skin's main fat-soluble antioxidant that fights free radicals to protect skin from damage.
Topical vitamin E generally boosts the skin's photoprotection, and it reduced UV-damage in animal models.
This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.
Overall, it has a pretty solid safety profile and has been found to be non-irritating and non-comedogenic. Allergic reactions may happen but stay rare due to how widely the ingredient gets used.
The concentration will vary depending on the formula; industry data shows 0.1% in baby lotions, 3% in lipsticks, and 5% in foot powders. You can also find this ingredient at 100% in a pure vitamin E oil.
Most leave-on skincare keeps it at the lower end, often between 0.5-1%.
Learn more about Tocopheryl AcetateWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water