What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningGlycerin
HumectantButylene Glycol
HumectantBetaine
HumectantCetearyl Ethylhexanoate
EmollientCetearyl Alcohol
EmollientPolyglycerin-3
HumectantDimethicone
EmollientCamellia Oleifera Seed Oil
Skin ConditioningPentaerythrityl Tetrabehenate
EmollientMangifera Indica Seed Butter
Skin ConditioningBoron Nitride
AbsorbentCetyl Palmitate
EmollientZea Mays Starch
AbsorbentLilium Candidum Bulb Extract
Skin ConditioningJasminum Officinale Flower Extract
MaskingAdenosine
Skin ConditioningSodium Hyaluronate
HumectantSodium Tocopheryl Phosphate
AntioxidantPalmaria Palmata Extract
Skin ProtectingPhytosteryl/Octyldodecyl Lauroyl Glutamate
Skin ConditioningPolyglycerin-6
HumectantCetearyl Glucoside
EmulsifyingHydrogenated Coco-Glycerides
EmollientCaprylyl Glycol
EmollientXylitol
HumectantChlorphenesin
AntimicrobialTapioca Starch
Pullulan
Parfum
MaskingCeramide NP
Skin ConditioningSodium Surfactin
CleansingCI 77891
Cosmetic ColorantCitric Acid
BufferingSodium Hydroxide
BufferingHydroxyacetophenone
AntioxidantTocopherol
AntioxidantPentylene Glycol
Skin ConditioningAcetyl Dipeptide-1 Cetyl Ester
Skin ConditioningTropaeolum Majus Flower/Leaf/Stem Extract
Skin ConditioningSodium Benzoate
MaskingCI 77492
Cosmetic ColorantSilica
AbrasiveSteareth-21
CleansingDimethicone Crosspolymer
Emulsion StabilisingCarbomer
Emulsion StabilisingSodium Hyaluronate Crosspolymer
HumectantWater, Glycerin, Butylene Glycol, Betaine, Cetearyl Ethylhexanoate, Cetearyl Alcohol, Polyglycerin-3, Dimethicone, Camellia Oleifera Seed Oil, Pentaerythrityl Tetrabehenate, Mangifera Indica Seed Butter, Boron Nitride, Cetyl Palmitate, Zea Mays Starch, Lilium Candidum Bulb Extract, Jasminum Officinale Flower Extract, Adenosine, Sodium Hyaluronate, Sodium Tocopheryl Phosphate, Palmaria Palmata Extract, Phytosteryl/Octyldodecyl Lauroyl Glutamate, Polyglycerin-6, Cetearyl Glucoside, Hydrogenated Coco-Glycerides, Caprylyl Glycol, Xylitol, Chlorphenesin, Tapioca Starch, Pullulan, Parfum, Ceramide NP, Sodium Surfactin, CI 77891, Citric Acid, Sodium Hydroxide, Hydroxyacetophenone, Tocopherol, Pentylene Glycol, Acetyl Dipeptide-1 Cetyl Ester, Tropaeolum Majus Flower/Leaf/Stem Extract, Sodium Benzoate, CI 77492, Silica, Steareth-21, Dimethicone Crosspolymer, Carbomer, Sodium Hyaluronate Crosspolymer
Water
Skin ConditioningGlycerin
HumectantPropylene Glycol
HumectantButyrospermum Parkii Butter
Skin ConditioningDimethicone
EmollientOryza Sativa Bran Oil
EmollientSilica
AbrasiveCI 14700
Cosmetic ColorantZea Mays Oil
EmulsifyingLecithin
EmollientTocopherol
AntioxidantSodium Hyaluronate
HumectantSodium Hydroxide
BufferingHydroxypalmitoyl Sphinganine
Skin ConditioningPhenoxyethanol
PreservativeStearalkonium Hectorite
Gel FormingPaeonia Suffruticosa Extract
Skin ConditioningEugenol
PerfumingTriticum Vulgare Germ Oil
EmollientTriticum Vulgare Germ Extract
Skin ConditioningChlorphenesin
AntimicrobialPolysorbate 80
EmulsifyingPolycaprolactone
StabilisingPoloxamer 188
EmulsifyingDimethiconol
EmollientAmmonium Polyacryloyldimethyl Taurate
Emulsion StabilisingLimonene
PerfumingBenzylalcohol Dha
Isohexadecane
EmollientPropylene Carbonate
Solvent2-Oleamido-1,3-Octadecanediol
Skin ConditioningAlpha-Isomethyl Ionone
PerfumingAcrylamide
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Emulsion StabilisingCeramide NP
Skin ConditioningMoringa Oleifera Seed Extract
Skin ConditioningSesamum Indicum Oil Unsaponifiables
EmollientDisodium EDTA
Rosa Gallica Callus Extract
AntioxidantOctyldodecanol
EmollientButylene Glycol
HumectantCitronellol
PerfumingParfum
MaskingWater, Glycerin, Propylene Glycol, Butyrospermum Parkii Butter, Dimethicone, Oryza Sativa Bran Oil, Silica, CI 14700, Zea Mays Oil, Lecithin, Tocopherol, Sodium Hyaluronate, Sodium Hydroxide, Hydroxypalmitoyl Sphinganine, Phenoxyethanol, Stearalkonium Hectorite, Paeonia Suffruticosa Extract, Eugenol, Triticum Vulgare Germ Oil, Triticum Vulgare Germ Extract, Chlorphenesin, Polysorbate 80, Polycaprolactone, Poloxamer 188, Dimethiconol, Ammonium Polyacryloyldimethyl Taurate, Limonene, Benzylalcohol Dha, Isohexadecane, Propylene Carbonate, 2-Oleamido-1,3-Octadecanediol, Alpha-Isomethyl Ionone, Acrylamide, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Ceramide NP, Moringa Oleifera Seed Extract, Sesamum Indicum Oil Unsaponifiables, Disodium EDTA, Rosa Gallica Callus Extract, Octyldodecanol, Butylene Glycol, Citronellol, Parfum
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:
Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
Learn more about Butylene GlycolCeramide NP (formerly known as Ceramide 3) is one of the skin's naturally occurring lipids.
Since ceramides are the major lipid components of the skin, they are crucial for maintaining skin barrier and hydration. Ceramide NP most closely mirrors the dominant kind in human skin amongst ceramide subtypes.
This ceramide works by slotting into gaps within the stratum corneum's lipid matrix to limit trans-epidermal water loss (TEWL) and shield the skin against external irritants.
A study with 312 patients found that using a ceramide-containing routine for 4 weeks reduced the severity of atopic dermatitis by over 61%.
Another clinical study in subjects aged 60 and older found that a ceramide body wash and moisturizer improved skin dryness and itchy skin in 15 days.
Overall, ceramides are considered non-irritating and safety tests have found little to no observable adverse effects from using this ingredient.
Ceramide NP is usually sourced from plants (like soybean or rice bran), or produced synthetically.
Learn more about Ceramide NPChlorphenesin is a synthetic preservative. It helps protect a product against bacteria in order to extend shelf life. In most cases, Chlorphenesin is paired with other preservatives such as phenoxyethanol and caprylyl glycol.
Chlorphenesin is a biocide. This means it is able to help fight the microorganisms on our skin. It is also able to fight odor-releasing bacteria.
Chlorphenesin is soluble in both water and glycerin.
Studies show Chlorphenesin is easily absorbed by our skin. You should speak with a skincare professional if you have concerns about using Chlorphenesin.
Learn more about ChlorphenesinDimethicone is a type of synthetic silicone created from natural materials such as quartz. It is also known as polydimethylsiloxane.
What it does:
Dimethicone comes in different viscosities:
Depending on the viscosity, dimethicone has different properties.
Ingredients lists don't always show which type is used, so we recommend reaching out to the brand if you have questions about the viscosity.
This ingredient is unlikely to cause irritation because it does not get absorbed into skin. However, people with silicone allergies should be careful about using this ingredient.
Note: Dimethicone may contribute to pilling. This is because it is not oil or water soluble, so pilling may occur when layered with products. When mixed with heavy oils in a formula, the outcome is also quite greasy.
Learn more about DimethiconeGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinParfum is a catch-all term for an ingredient or more that is used to give a scent to products.
Also called "fragrance", this ingredient can be a blend of hundreds of chemicals or plant oils. This means every product with "fragrance" or "parfum" in the ingredients list is a different mixture.
For instance, Habanolide is a proprietary trade name for a specific aroma chemical. When used as a fragrance ingredient in cosmetics, most aroma chemicals fall under the broad labeling category of “FRAGRANCE” or “PARFUM” according to EU and US regulations.
The term 'parfum' or 'fragrance' is not regulated in many countries. In many cases, it is up to the brand to define this term.
For instance, many brands choose to label themselves as "fragrance-free" because they are not using synthetic fragrances. However, their products may still contain ingredients such as essential oils that are considered a fragrance by INCI standards.
One example is Calendula flower extract. Calendula is an essential oil that still imparts a scent or 'fragrance'.
Depending on the blend, the ingredients in the mixture can cause allergies and sensitivities on the skin. Some ingredients that are known EU allergens include linalool and citronellol.
Parfum can also be used to mask or cover an unpleasant scent.
The bottom line is: not all fragrances/parfum/ingredients are created equally. If you are worried about fragrances, we recommend taking a closer look at an ingredient. And of course, we always recommend speaking with a professional.
Learn more about ParfumSilica, also known as silicon dioxide, is a naturally occurring mineral. It is used as a fine, spherical, and porous powder in cosmetics.
Though it has exfoliant properties, the function of silica varies depending on the product.
The unique structure of silica enhances the spreadability and adds smoothness, making it a great texture enhancer.
It is also used as an active carrier, emulsifier, and mattifier due to its ability to absorb excess oil.
In some products, tiny microneedles called spicules are made from silica or hydrolyzed sponge. When you rub them in, they lightly polish away dead skin layers and enhance the penetration of active ingredients.
Learn more about SilicaSodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.
In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.
Interestingly, the size of the molecule affects its behavior:
Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.
Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.
You'll typically see concentrations between 0.1-2% for this ingredient.
Learn more about Sodium HyaluronateSodium Hydroxide is also known as lye or caustic soda. It is used to adjust the pH of products; many ingredients require a specific pH to be effective.
In small amounts, sodium hydroxide is considered safe to use. However, large amounts may cause chemical burns due to its high alkaline.
Your skin has a natural pH and acid mantle. This acid mantle helps prevent harmful bacteria from breaking through. The acid mantle also helps keep your skin hydrated.
"Alkaline" refers to a high pH level. A low pH level would be considered acidic.
Learn more about Sodium HydroxideTocopherol is a fat-soluble antioxidant known as Vitamin E.
You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.
Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.
It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.
This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.
This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.
In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.
Concentrations usually range from 0.1-1% in most leave-on products.
Learn more about TocopherolWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water