Sunscreen
Sunscreen
Korean South Korea
Korean South Korea

What's inside

What's inside

Key Ingredients

Benefits

Concerns

No concerns

Ingredients Side-by-side

Show highlights for:

Water

Skin Conditioning

Dibutyl Adipate

Emollient

Alcohol Denat.

Antimicrobial
Alcohol IconCan worsen Dry Skin IconMay worsen Eczema IconMay cause irritation IconMay worsen Rosacea Icon

Butyloctyl Salicylate

Skin Conditioning
Non-Reef-Safe Icon

Silica

Abrasive
Exfoliant IconGood for Oily Skin IconGood for Minimizing Pores Icon

Dipropylene Glycol

Humectant

Ethylhexyl Triazone

UV Absorber
UV Protection IconChemical UV Filter Icon

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

Skin Conditioning
UV Protection IconChemical UV Filter Icon

Octocrylene

UV Absorber
UV Protection IconChemical UV Filter IconMay worsen Eczema IconMay cause irritation IconNon-Reef-Safe Icon

Propanediol

Solvent
Helps hydrate Dry Skin IconGood for Barrier Repair Icon

Niacinamide

Smoothing
Niacinamide IconHelps fight Acne IconHelps with Anti-Aging IconHelps brighten skin IconHelps reduce irritation IconGood for Oily Skin IconGood for Minimizing Pores IconHelps reduce Skin Redness IconGood for Scar Healing IconGood for Dark Spots IconGood for Skin Texture IconGood for Barrier Repair Icon

Erythritol

Humectant
Helps hydrate Dry Skin Icon

Terephthalylidene Dicamphor Sulfonic Acid

UV Absorber
UV Protection IconChemical UV Filter Icon

Pentylene Glycol

Skin Conditioning
Good for Barrier Repair Icon

Methylpropanediol

Solvent

Tromethamine

Buffering

Sphingomonas Ferment Extract

Skin Conditioning
Helps reduce Skin Redness IconNot safe for Fungal Acne Icon

Saccharomyces Ferment Filtrate

Humectant
Helps hydrate Dry Skin IconHelps reduce Skin Redness IconGood for Barrier Repair IconNot safe for Fungal Acne Icon

Rosmarinus Officinalis Leaf Water

Masking

Centella Asiatica Extract

Cleansing
Helps with Anti-Aging IconHelps reduce irritation IconHelps reduce Skin Redness IconGood for Scar Healing IconGood for Skin Texture IconGood for Barrier Repair Icon

Tremella Fuciformis Extract

Humectant
Helps hydrate Dry Skin IconHelps reduce Skin Redness IconGood for Barrier Repair Icon

Camellia Sinensis Leaf Extract

Antimicrobial
Antioxidant IconHelps with Anti-Aging IconHelps hydrate Dry Skin IconHelps brighten skin IconHelps reduce irritation IconGood for Oily Skin IconGood for Minimizing Pores IconHelps reduce Skin Redness Icon

Mentha Rotundifolia Leaf Extract

Tonic

Thymus Vulgaris Leaf Extract

Skin Protecting

Sodium Hyaluronate

Humectant
0 / 0 Hyaluronic Acid IconHelps with Anti-Aging IconHelps hydrate Dry Skin IconHelps reduce Skin Redness IconGood for Barrier Repair Icon

Polymethylsilsesquioxane

Silicon Icon

1,2-Hexanediol

Skin Conditioning
Helps hydrate Dry Skin Icon

Butylene Glycol

Humectant
1 / 0 Helps hydrate Dry Skin IconGood for Barrier Repair Icon

Hydroxyethyl Urea

Humectant
Helps hydrate Dry Skin Icon

Polyglyceryl-3 Methylglucose Distearate

Emulsifying
Not safe for Fungal Acne Icon

Stearyl Heptanoate

Emollient
4 / 0 Bad for Acne Prone Skin IconMay worsen Oily Skin Icon

Dimethiconol

Emollient
Silicon Icon

Poly C10-30 Alkyl Acrylate

Emulsion Stabilising

Microcrystalline Cellulose

Absorbent

Polyether-1

Ethylhexylglycerin

Skin Conditioning

Adenosine

Skin Conditioning
Helps with Anti-Aging IconHelps reduce irritation IconGood for Scar Healing Icon

Sodium Stearoyl Glutamate

Cleansing

Methyl Diisopropyl Propionamide

Masking

Cellulose Gum

Emulsion Stabilising
0 / 0

Albatrellus Confluens Extract

Humectant
Helps reduce irritation Icon

Tocopherol

Antioxidant
0-3 / 0-3 Vitamin E IconAntioxidant IconHelps with Anti-Aging IconHelps hydrate Dry Skin IconHelps brighten skin IconHelps reduce Skin Redness IconGood for Dark Spots IconGood for Barrier Repair Icon

Glycerin

Humectant
0 / 0 Helps hydrate Dry Skin IconGood for Scar Healing IconGood for Barrier Repair Icon

Sodium Chloride

Masking

Sodium Bicarbonate

Abrasive
Exfoliant Icon

Calcium Chloride

Astringent

Potassium Chloride

Glycine

Buffering
Helps hydrate Dry Skin Icon

Arginine

Masking
Helps hydrate Dry Skin IconGood for Scar Healing Icon

Glutamic Acid

Humectant
Helps reduce irritation Icon

Behenyl Alcohol

Emollient
Fatty Alcohol Icon

Carbomer

Emulsion Stabilising
1 / 0

Parfum

Masking
Synthetic Fragrance IconFragrance IconMay worsen Eczema IconMay worsen Rosacea Icon

Reviews

No reviews yet

Be the first to review

Write the first review
3.68
Overall rating
5
4
3
2
1
What people say
Light 80% Absorbs Well 68% Great Value 42%

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Skin Conditioning, Solvent

1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse. 

It is a:

  • Humectant, drawing moisture into the skin
  • Emollient, helping to soften skin
  • Solvent, dispersing and stabilizing formulas
  • Preservative booster, enhancing the antimicrobial activity of other preservatives 
Skin Conditioning, UV Absorber, UV Filter

This ingredient is better known as bemotrizinol or Tinosorb S and is one of the best broad-spectrum UV filters in modern sunscreen.

It works by absorbing UV light across a whole range (280-400 nm) with peaks around 310 nm (UVB) and 340-345 nm (UVA). This means it covers UVB plus the deeper UVA wavelengths that drive photoaging and pigmentation.

Another pro?

It's exceptionally photostable, barely degrades in sunlight, and acts as a "bodyguard" for less stable filters.

That's why you'll see it paired with avobenzone or octinoxate; this team up ensures they keep working through sun exposure.

Safety reviews have been reassuring across the board. This ingredient shows low absorption through the skin, rarely irritates, and lab studies found it doesn't act like a hormone in the body (a concern that's been raised about some older sunscreen filters).

On maximum concentrations:

In 2026, the US F.D.A finally added it as an OTC sunscreen ingredient at concentrations up to 6% for adults / children 6 months and older

Learn more about Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Humectant, Masking, Skin Conditioning

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Learn more about Butylene Glycol
Emollient, Skin Conditioning, Solvent

Dibutyl Adipate is a lightweight, oil-soluble ester that acts as an emollient and solvent. It helps products spread more easily and leaves a soft, silky, dry-touch finish without being greasy.

You'll likely see this ingredient in sunscreens because it does a nice job dissolving UV filters and keeping them evenly distributed.

This ingredient has been found to be safe as used in cosmetics, wasn't a skin or eye irritant in clinical patch testing, and wasn't phototoxic.

In a clinical comedogenicity test, this ingredient tested negative so it isn't likely to clog pores.

Typical use levels are about 5-8% for sunscreens + nail products, but can range from 0.005%-8% depending on the product.

Learn more about Dibutyl Adipate
UV Absorber, UV Filter

Ethylhexyl Triazone (aka Octyl Triazone) is an oil-soluble organic UVB filter. It has peak absorption around 314 nm, right in the middle of the UVB range.

This ingredient is described as one of the most effective UVB filters available and small concentrations are enough to deliver a high SPF thanks to its strong UV absorbing power.

Formulators love it for its stability; its ability to filter UV stays practically unchanged even under intense radiation and it can also help boost the photostability of less stable filters like avobenzone.

It's also a great pick for water resistant products because it's insoluble in water and has a good affinity for keratin.

Because it's a big, heavy molecule, the European Scientific Committee has found to to have very low dermal penetration and negative results for allergenicity.

In vitro testing also showed a low absorption rate and clean results on irritation.

Typical use levels are 1-5% with 5% being the maximum in the EU, Japan, and other markets that allow it. However, this ingredient is not approved yet in the US or Canada.

Learn more about Ethylhexyl Triazone
Skin Conditioning

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Learn more about Ethylhexylglycerin

Methylpropanediol is a synthetic solvent and humectant.

As a solvent, it helps dissolve other ingredients, helping to evenly distribute ingredients throughout the product. This ingredient has also been shown to have antimicrobial properties which makes it a preservative booster.

Methylpropanediol is able to add a bit of moisture to the skin. It also helps other ingredients be better absorbed into the skin, such as salicylic acid.

Learn more about Methylpropanediol
Skin Conditioning, Solvent

Pentylene glycol is typically used within a product to thicken it. It also adds a smooth, soft, and moisturizing feel to the product. It is naturally found in plants such as sugar beets.

The hydrophilic trait of Pentylene Glycol makes it a humectant. As a humectant, Pentylene Glycol helps draw moisture from the air to your skin. This can help keep your skin hydrated.

This property also makes Pentylene Glycol a great texture enhancer. It can also help thicken or stabilize a product.

Pentylene Glycol also acts as a mild preservative and helps to keep a product microbe-free.

Some people may experience mild eye and skin irritation from Pentylene Glycol. We always recommend speaking with a professional about using this ingredient in your routine.

Pentylene Glycol has a low molecular weight and is part of the 1,2-glycol family.

Learn more about Pentylene Glycol

We don't have a description for Polyether-1 yet.

Abrasive, Absorbent

Silica, also known as silicon dioxide, is a naturally occurring mineral. It is used as a fine, spherical, and porous powder in cosmetics.

Though it has exfoliant properties, the function of silica varies depending on the product.

The unique structure of silica enhances the spreadability and adds smoothness, making it a great texture enhancer.

It is also used as an active carrier, emulsifier, and mattifier due to its ability to absorb excess oil.

In some products, tiny microneedles called spicules are made from silica or hydrolyzed sponge. When you rub them in, they lightly polish away dead skin layers and enhance the penetration of active ingredients.

Learn more about Silica

Terephthalylidene Dicamphor Sulfonic Acid (aka ecamsule or Mexoryl SX) is a water-soluble organic UV filter developed and patented by L'Oreal back in 1982.

It's one of the better UVA protectors out there and shields skin across a broad UVA range (~290-390 nm) with peak absorption right around 345 nm.

This peak absorption happens to be the exact type of UVA light that sinks deepest into skin and does the most to cause aging and dark spots.

Ecamsule works by soaking up UV rays and turning them into a tiny bit of harmless heat. The molecule basically flips, releases that energy as heat, then snaps back to its original shape and does it all over again. This is also why it's so stable in sunlight and doesn't break down or wear out the way some filters do.

The clinical backing for this ingredient is solid as well:

A large 2008 review by Fourtanier & colleagues (2008) pulled together human trials showing ecamsule-containing sunscreens prevented UV-induced pigmentation, DNA damage, and signs of aging.

That built on earlier work by Seite et al. (1998) that found it protected skin from repeated low-level UVA exposure. And a controlled study by DeLeo et al. (2009) showed that even an SPF 40 cream with ecamsule helped prevent sun-triggered rash even under the real sun.

On concentrations:

Because this ingredient is an acid, it has to be neutralized so it doesn't tank the product's pH.

Safety-wise, it's pretty well tolerated. There are some rare cases of mild irritation mostly in people with sensitivities towards camphor derivatives.

A 2019 FDA study found that volunteers who slathered on sunscreen heavily for several days had tiny amounts of ecamsule show up in their blood. This was slightly above the level at which the FDA asks for extra safety testing; this just means the FDA wants more safety studies done and not evidence that anything harmful actually happens. No problems were found and dermatologists still recommend using sunscreen.

Learn more about Terephthalylidene Dicamphor Sulfonic Acid
Buffering, Masking

Tromethamine helps balance the pH and improve the texture of a product. It is synthetically created.

As an emulsifier, Tromethamine prevents oil and water ingredients from separating. This helps stabilize the product and elongate a product's shelf life. Tromethamine also makes a product thicker.

Tromethamine helps balance the pH level of a product. Normal pH level of skin is slightly acidic (~4.75-5.5). The acidity of our skin is maintained by our glands and skin biome. Being slightly acidic allows our skin to create an "acid mantle". This acid mantle is a thin barrier that protects our skin from bacteria and contaminants.

Oral Tromethanmine is an anti-inflammatory drug but plays the role of masking, adding fragrance, and/or balancing pH in skincare.

1,3-Propanediol, 2-amino-2-(hydroxymethyl)-

Learn more about Tromethamine
Skin Conditioning, Solvent

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Learn more about Water

Similar Comparisons