What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningCyclopentasiloxane
EmollientEthylhexyl Methoxycinnamate
UV AbsorberTitanium Dioxide
Cosmetic ColorantZinc Oxide
Cosmetic ColorantCaprylic/Capric Triglyceride
MaskingGlycerin
HumectantCetyl PEG/PPG-10/1 Dimethicone
EmulsifyingSorbitan Sesquioleate
EmulsifyingArbutin
AntioxidantDimethicone
EmollientCI 77492
Cosmetic ColorantSodium Chloride
MaskingAdenosine
Skin ConditioningCeramide NP
Skin ConditioningRosmarinus Officinalis Extract
AntimicrobialAnthemis Nobilis Flower Extract
MaskingSodium Hyaluronate
HumectantPhenoxyethanol
PreservativeDimethicone/Vinyl Dimethicone Crosspolymer
Skin ConditioningPEG-10 Dimethicone Crosspolymer
StabilisingOzokerite
Emulsion StabilisingBeeswax
Emulsion StabilisingButylene Glycol
HumectantParfum
MaskingStearalkonium Hectorite
Gel FormingMagnesium Aluminum Silicate
AbsorbentQuartz
AbrasiveIron Oxides
Water, Cyclopentasiloxane, Ethylhexyl Methoxycinnamate, Titanium Dioxide, Zinc Oxide, Caprylic/Capric Triglyceride, Glycerin, Cetyl PEG/PPG-10/1 Dimethicone, Sorbitan Sesquioleate, Arbutin, Dimethicone, CI 77492, Sodium Chloride, Adenosine, Ceramide NP, Rosmarinus Officinalis Extract, Anthemis Nobilis Flower Extract, Sodium Hyaluronate, Phenoxyethanol, Dimethicone/Vinyl Dimethicone Crosspolymer, PEG-10 Dimethicone Crosspolymer, Ozokerite, Beeswax, Butylene Glycol, Parfum, Stearalkonium Hectorite, Magnesium Aluminum Silicate, Quartz, Iron Oxides
Water
Skin ConditioningDibutyl Adipate
EmollientDimethicone
EmollientC9-12 Alkane
SolventC13-15 Alkane
SolventDiisopropyl Sebacate
EmollientGlycerin
HumectantLauryl PEG-10 Tris(Trimethylsiloxy)Silylethyl Dimethicone
EmulsifyingOctyldodecanol
EmollientEthylhexyl Triazone
UV AbsorberMagnesium Sulfate
Phenylbenzimidazole Sulfonic Acid
UV AbsorberDiethylamino Hydroxybenzoyl Hexyl Benzoate
UV FilterPolyglyceryl-4 Isostearate
EmulsifyingCetyl PEG/PPG-10/1 Dimethicone
EmulsifyingHexyl Laurate
EmollientMica
Cosmetic ColorantCetearyl Dimethicone Crosspolymer
Butylene Glycol
HumectantVaccinium Vitis-Idaea Seed Oil
AntioxidantPhenoxyethanol
PreservativeTromethamine
BufferingSaccharomyces Ferment
Skin ConditioningDisteardimonium Hectorite
StabilisingHydroxyacetophenone
AntioxidantSilica
AbrasiveTriethyl Citrate
MaskingAluminum Hydroxide
EmollientEthylhexylglycerin
Skin ConditioningDisodium EDTA
Hydrolyzed Hyaluronic Acid
HumectantPentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate
AntioxidantSodium Lauroyl Glutamate
Lauroyl Lysine
Skin ConditioningLysine
Skin ConditioningMagnesium Chloride
Helianthus Annuus Seed Oil
EmollientRosmarinus Officinalis Leaf Extract
AntimicrobialTetramethyl Acetyloctahydronaphthalenes
MaskingParfum
MaskingIron Oxides
CI 77891
Cosmetic ColorantWater, Dibutyl Adipate, Dimethicone, C9-12 Alkane, C13-15 Alkane, Diisopropyl Sebacate, Glycerin, Lauryl PEG-10 Tris(Trimethylsiloxy)Silylethyl Dimethicone, Octyldodecanol, Ethylhexyl Triazone, Magnesium Sulfate, Phenylbenzimidazole Sulfonic Acid, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Polyglyceryl-4 Isostearate, Cetyl PEG/PPG-10/1 Dimethicone, Hexyl Laurate, Mica, Cetearyl Dimethicone Crosspolymer, Butylene Glycol, Vaccinium Vitis-Idaea Seed Oil, Phenoxyethanol, Tromethamine, Saccharomyces Ferment, Disteardimonium Hectorite, Hydroxyacetophenone, Silica, Triethyl Citrate, Aluminum Hydroxide, Ethylhexylglycerin, Disodium EDTA, Hydrolyzed Hyaluronic Acid, Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate, Sodium Lauroyl Glutamate, Lauroyl Lysine, Lysine, Magnesium Chloride, Helianthus Annuus Seed Oil, Rosmarinus Officinalis Leaf Extract, Tetramethyl Acetyloctahydronaphthalenes, Parfum, Iron Oxides, CI 77891
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:
Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
Learn more about Butylene GlycolThis ingredient is a silicone-based emulsifer that helps the water and oil phases play nicely together. It's so effective because one end of the molecule loves oil and the other one loves water.
Besides holding formulas together, it also leaves a silky and lightweight feel on skin without the greasiness. A manufacturer also claims it can help with the controlled release of active ingredients.
The CIR Expert Panel found this ingredient to not be sensitizing in concentrations up to 15% in human maximazation testing and dimethicone-based compounds were not comedogenic.
It has a high molecular weight well above 1,000 g/mol which means it limits meaningful skin penetration.
A 2019 study specifically tested this ingredient and found no observable Malassezia growth in its presence.
Learn more about Cetyl PEG/PPG-10/1 DimethiconeDimethicone is a type of synthetic silicone created from natural materials such as quartz. It is also known as polydimethylsiloxane.
What it does:
Dimethicone comes in different viscosities:
Depending on the viscosity, dimethicone has different properties.
Ingredients lists don't always show which type is used, so we recommend reaching out to the brand if you have questions about the viscosity.
This ingredient is unlikely to cause irritation because it does not get absorbed into skin. However, people with silicone allergies should be careful about using this ingredient.
Note: Dimethicone may contribute to pilling. This is because it is not oil or water soluble, so pilling may occur when layered with products. When mixed with heavy oils in a formula, the outcome is also quite greasy.
Learn more about DimethiconeGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinParfum is a catch-all term for an ingredient or more that is used to give a scent to products.
Also called "fragrance", this ingredient can be a blend of hundreds of chemicals or plant oils. This means every product with "fragrance" or "parfum" in the ingredients list is a different mixture.
For instance, Habanolide is a proprietary trade name for a specific aroma chemical. When used as a fragrance ingredient in cosmetics, most aroma chemicals fall under the broad labeling category of āFRAGRANCEā or āPARFUMā according to EU and US regulations.
The term 'parfum' or 'fragrance' is not regulated in many countries. In many cases, it is up to the brand to define this term.
For instance, many brands choose to label themselves as "fragrance-free" because they are not using synthetic fragrances. However, their products may still contain ingredients such as essential oils that are considered a fragrance by INCI standards.
One example is Calendula flower extract. Calendula is an essential oil that still imparts a scent or 'fragrance'.
Depending on the blend, the ingredients in the mixture can cause allergies and sensitivities on the skin. Some ingredients that are known EU allergens include linalool and citronellol.
Parfum can also be used to mask or cover an unpleasant scent.
The bottom line is: not all fragrances/parfum/ingredients are created equally. If you are worried about fragrances, we recommend taking a closer look at an ingredient. And of course, we always recommend speaking with a professional.
Learn more about ParfumPhenoxyethanol is a preservative that has germicide, antimicrobial, and aromatic properties. Studies show that phenoxyethanol can prevent microbial growth. By itself, it has a scent that is similar to that of a rose.
It's often used in formulations along with Caprylyl Glycol to preserve the shelf life of products.
Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about WaterThis ingredient is a combination of red, black, and yellow iron oxide pigments. This combination of colors is usually found in foundation, because it results in a "skin" color.
The EU typically uses CI numbers for colorants when applicable, such as CI 77489. In the US, iron oxides are regulated as color additives and "iron oxides" is the most commonly used name in US cosmetic practice.
A 2021 paper looked at skincare formulations containing iron oxides and found that they reduced transmission of blue light when measured optically. In simple terms, the pigment particles helped block or scatter part of the visible light spectrum in lab testing and the authors suggest this could translate into better protection against blue-light-related skin effects.
There is also clinical and experimental research showing that tinted products containing iron oxides can reduce visible light-induced pigmentation:
Please note, whether a product reduces visible or blue light depends on things like:
In the EU's CosIng database, iron oxides are only listed as a colorant. CosIng groups ingredients by their main cosmetic role, such as colorant, preservative, or UV filter.
Though studies say iron oxides can "attenuate blue light", they're describing an optical property and not an officially recognized cosmetic function.
So CosIng isnāt contradicting the research. Itās just classifying iron oxides by what they officially are: pigments that add color.
Learn more about Iron Oxides