Clef Skin Perfecting Tinted Physical Sunscreen SPF 30 Versus Skinmade Skin Boost Broad-Spectrum + Blue Light Sunscreen SPF 50+ PA++++
What's inside
What's inside
Key Ingredients
Benefits
Concerns
No concerns
Ingredients Side-by-side
Water
Skin ConditioningTitanium Dioxide
Cosmetic ColorantButylene Glycol
HumectantGlycerin
HumectantCaprylic/Capric Triglyceride
MaskingCyclopentasiloxane
EmollientPEG-10 Dimethicone
Skin ConditioningDimethicone
EmollientZinc Oxide
Cosmetic ColorantSilica
AbrasiveTrehalose
HumectantChamomilla Recutita Flower Water
MaskingDimethicone/Vinyl Dimethicone Crosspolymer
Skin ConditioningCetyl PEG/PPG-10/1 Dimethicone
EmulsifyingStearic Acid
CleansingPhenoxyethanol
PreservativeBifida Ferment Lysate
Skin ConditioningPhyllanthus Emblica Fruit Extract
HumectantTocopherol
Antioxidant3-O-Ethyl Ascorbic Acid
Skin ConditioningAlgae Extract
EmollientLonicera Japonica Flower Extract
Skin ConditioningCamellia Sinensis Leaf Extract
AntimicrobialEthylhexylglycerin
Skin ConditioningMica
Cosmetic ColorantCI 77492
Cosmetic ColorantCI 77491
Cosmetic ColorantWater, Titanium Dioxide, Butylene Glycol, Glycerin, Caprylic/Capric Triglyceride, Cyclopentasiloxane, PEG-10 Dimethicone, Dimethicone, Zinc Oxide, Silica, Trehalose, Chamomilla Recutita Flower Water, Dimethicone/Vinyl Dimethicone Crosspolymer, Cetyl PEG/PPG-10/1 Dimethicone, Stearic Acid, Phenoxyethanol, Bifida Ferment Lysate, Phyllanthus Emblica Fruit Extract, Tocopherol, 3-O-Ethyl Ascorbic Acid, Algae Extract, Lonicera Japonica Flower Extract, Camellia Sinensis Leaf Extract, Ethylhexylglycerin, Mica, CI 77492, CI 77491
Glycyrrhiza Glabra Root Water
AntioxidantGlycerin
HumectantCyclopentasiloxane
EmollientIsohexadecane
EmollientZinc Oxide
Cosmetic ColorantC12-15 Alkyl Benzoate
AntimicrobialDiethylamino Hydroxybenzoyl Hexyl Benzoate
UV FilterBis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Skin ConditioningEthylhexyl Triazone
UV AbsorberLauryl PEG-9 Polydimethylsiloxyethyl Dimethicone
Skin ConditioningTerephthalylidene Dicamphor Sulfonic Acid
UV AbsorberGlycyrrhiza Glabra Root Extract
BleachingOpuntia Ficus-Indica Extract
Skin ConditioningAscorbyl Glucoside
AntioxidantNiacinamide
SmoothingHdi/Trimethylol Hexyllactone Crosspolymer
Panthenol
Skin ConditioningSodium Hyaluronate
HumectantAllantoin
Skin ConditioningChlorella Vulgaris Extract
Skin ConditioningPolyglyceryl-2 Dipolyhydroxystearate
Skin ConditioningMethyl Methacrylate Crosspolymer
Magnesium Aspartate
Skin ConditioningZinc Gluconate
Skin ConditioningDisteardimonium Hectorite
StabilisingMagnesium Sulfate
Caprylyl Glycol
EmollientIron Oxides
Adenosine
Skin ConditioningEctoin
Skin ConditioningEpigallocatechin Gallate
AntioxidantXanthan Gum
EmulsifyingPhenoxyethanol
PreservativeTriethoxycaprylylsilane
Lactic Acid/Glycolic Acid Copolymer
Skin ConditioningHeptapeptide-15 Palmitate
Skin ConditioningCeramide EOP
Skin ConditioningCeramide NP
Skin ConditioningCopper Gluconate
Skin ConditioningEthylhexylglycerin
Skin ConditioningGlycyrrhiza Glabra Root Water, Glycerin, Cyclopentasiloxane, Isohexadecane, Zinc Oxide, C12-15 Alkyl Benzoate, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, Ethylhexyl Triazone, Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone, Terephthalylidene Dicamphor Sulfonic Acid, Glycyrrhiza Glabra Root Extract, Opuntia Ficus-Indica Extract, Ascorbyl Glucoside, Niacinamide, Hdi/Trimethylol Hexyllactone Crosspolymer, Panthenol, Sodium Hyaluronate, Allantoin, Chlorella Vulgaris Extract, Polyglyceryl-2 Dipolyhydroxystearate, Methyl Methacrylate Crosspolymer, Magnesium Aspartate, Zinc Gluconate, Disteardimonium Hectorite, Magnesium Sulfate, Caprylyl Glycol, Iron Oxides, Adenosine, Ectoin, Epigallocatechin Gallate, Xanthan Gum, Phenoxyethanol, Triethoxycaprylylsilane, Lactic Acid/Glycolic Acid Copolymer, Heptapeptide-15 Palmitate, Ceramide EOP, Ceramide NP, Copper Gluconate, Ethylhexylglycerin
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Cyclopentasiloxane (D5) is a lightweight silicone that mostly acts as an emollient and solvent in cosmetics. Its the reason your products feel silky, fast-spreading, and non-greasy.
Since D5 is volatile, it does its thing and then evaporates off the skin quickly.
The safety profile of this ingredient is reassuring; the US CIR Expert Panel concluded D5 is safe as used in cosmetics and Health Canada concluded that D5 is not harmful to human health or the environment as currently used in cosmetics
There's a study that people mention about D5 in a rat study showing tumors. This study is related to long-term inhalation of high D5 levels.
Regulatory bodies have judged this study to be not applicable in topical skincare since skin absorption of D5 is very low and we're not really inhaling huge amounts of D5.
The only restriction for this ingredient is environmental. The European Chemicals Agency (ECHA) restricted D5 in wash-off cosmetics at or above 0.1% due to their persistence in water.
Learn more about CyclopentasiloxaneEthylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Learn more about EthylhexylglycerinGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinPhenoxyethanol is a preservative that has germicide, antimicrobial, and aromatic properties. Studies show that phenoxyethanol can prevent microbial growth. By itself, it has a scent that is similar to that of a rose.
It's often used in formulations along with Caprylyl Glycol to preserve the shelf life of products.
Zinc Oxide (ZO) is a mineral broad-spectrum UV filter and the broadest-spectrum filter recognized by the FDA. It covers everything from UVB through to long-wave UVA.
On top of sun protection, it has skin protectant and skin-soothing properties too.
Here's a myth worth busting: mineral filters are usually described as working by "reflecting" or "bouncing" UV off your skin.
That's mostly not true: when researchers actually measured it, ZO and Titanium Dioxide reflect only about 4-5% of UV (less than SPF 2 worth of protection).
The vast majority of the work (~95%) is done by absorption, similar to chemical UV filters. ZO is a semiconductor that absorbs UV photos through its energy band gap.
So the old "physical blocker vs. chemical absorber" framing is really an oversimplification.
Zinc Oxide is one of the most effective broad-spectrum UV filters out there. It protects across UVB, UVA2, and UVA1 with a flat, even absorption curve across the whole UVA-UVB range.
That uniform UVA coverage is its standout feature; titanium dioxide skews more toward UVB as its particle size drops so ZO gives more consistent and extended UVA protection.
It's also very photostable. As an inorganic oxide, ZO doesn't break down in sunlight the way some organic filters can, so it holds up over a day of wear.
This ingredient is gentle and soothing, making it go-to for sunscreens aimed at sensitive skin, rosacea, or ecezma-prone skin, babies, and children.
It's also unlikely to cause the "eye sting" that some sunscreen ingredients are known for, and regulatory agencies broadly consider it non-toxic and safe for topical use.
Beyond sun protection, ZO is also a recognized OTC skin protectant. It forms a breathable barrier that shields skin from moisture and irritation while supporting healing. This is why you'll see it as a classic active in diaper rash creams.
The only downside to ZO is that it can leave a visible white cast, especially on deeper skin tones. This is the main reason mineral sunscreens have historically felt less cosmetically elegant than chemical or hybrid formulas.
Zinc Oxide comes in both non-nano and nano forms. The dividing line is 100nm and anything under is classified as a nanomaterial by the EU.
The nano version scatters less visible light which cuts down white case and gives a lighter, more wearable texture.
Another thing worth understanding about formulation:
Uncoated ZO has some inherent photocatalytic activity. This just means it can generate reactive oxygen species under UV. It's exactly why cosmetic-grade ZO is almost always surface-coated; this coating suppresses that reactivity and improves how the powder disperses and feels.
A well-formulated coated ZO largely sidesteps this issue.
Zinc Oxide is commonly used anywhere from 10% up to the regulatory maximum in sunscreens (25%).
Mineral-only broad-spectrum products often land in the 15-25% range to hit higher SPF and UVA values. Keep in mind SPF performance depends heavily on particle size, dispersion, and the rest of the formula, and not just the percentage.
As an OTC skin protectant like diaper creams, ZO typically runs higher at roughly 10-40%.
This ingredient is generally easy to work with and doesn't photodegrade.
The only thing to know is that uncoated ZO can be a bit reactive in a formula.
Under UV, it can break down sensitive ingredients like other actives or UV filters. This is another reason coated versions are standard. ZO can also react with very acidic ingredients or throw off stability of some creams. A good formula will get around this with the right coatings and dispersion.
The EU's Scientific Committee on Consumer Safety has concluded that ZO nanoparticles "can be considered to not pose any risk of adverse effects in humans after application on healthy, intact or sunburnt skin".
You might hear that ZO is "toxic"; this is because an in-vitro (test tube) study suggested micronized ZO had potential phototoxicity. In vivo (human) investigations have disputed this and the results have come back reassuring.
So does ZO penetrate skin? The short answer is no, not in any way that matters.
The most relevant evidence comes from real-world human studies: in one, volunteers applied ZO nanoparticle sunscreen hourly for six hours and daily for five days. The advanced imaging showed the particles stayed on the surface and never reached the living epidermis, and no cellular toxicity was found.
Other in-vivo and ex-vivo work agree; ZO nanoparticles don't cross the stratum corneum, even on flexed, massaged, or barrier-impaired skin.
A small amount of solubilized zinc ions can dissolve off the particles and enter the upper skin. But the quantities are tiny compared to the zinc already naturally present in your body, and studies haven't found this to cause local toxicity.
The sunscreen bans you've heard of (like Hawaii's) are aimed at two chemical filters, Oxybenzone and Octinoxate. ZO itself it not banned and is often recommended instead.
So far, there's no solid evidence that any form of ZO harms reefs. It is an ongoing and active area of study, and worth keeping an eye on.
If you're traveling somewhere with these rules, a non-nano mineral sunscreen is the safe bet.
Learn more about Zinc Oxide