Emina Bright Stuff Prebiotic Tranexamic Acid Brightening Facial Cleanser Versus Facerinna Salicylic Acid Acne Gel Cleanser
This salicylic acid foaming cleanser is formulated around Salicylic Acid to clear breakouts and unclog pores.
This salicylic acid gel cleanser is formulated around Salicylic Acid to clear breakouts and unclog pores.
What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Glycerin
HumectantWater
Skin ConditioningMyristic Acid
CleansingStearic Acid
CleansingPotassium Hydroxide
BufferingPropylene Glycol
HumectantLauric Acid
CleansingGlyceryl Stearate
EmollientOlive Oil PEG-7 Esters
EmollientXylitol
HumectantPEG-8
HumectantSodium PCA
HumectantPotassium Cocoyl Glycinate
SurfactantPanthenol
Skin ConditioningPhenoxyethanol
PreservativePotassium Cocoate
EmulsifyingAllantoin
Skin ConditioningParfum
MaskingEthylhexylglycerin
Skin ConditioningNiacinamide
SmoothingSalicylic Acid
MaskingPolyquaternium-7
Hydroxypropyl Methylcellulose
Emulsion StabilisingGlycyrrhiza Glabra Root Extract
BleachingDisodium EDTA
Xylitylglucoside
HumectantAnhydroxylitol
HumectantPropanediol
SolventGlucose
HumectantSodium Benzoate
MaskingTranexamic Acid
AstringentRhamnose
HumectantGlucuronic Acid
BufferingGlycerin, Water, Myristic Acid, Stearic Acid, Potassium Hydroxide, Propylene Glycol, Lauric Acid, Glyceryl Stearate, Olive Oil PEG-7 Esters, Xylitol, PEG-8, Sodium PCA, Potassium Cocoyl Glycinate, Panthenol, Phenoxyethanol, Potassium Cocoate, Allantoin, Parfum, Ethylhexylglycerin, Niacinamide, Salicylic Acid, Polyquaternium-7, Hydroxypropyl Methylcellulose, Glycyrrhiza Glabra Root Extract, Disodium EDTA, Xylitylglucoside, Anhydroxylitol, Propanediol, Glucose, Sodium Benzoate, Tranexamic Acid, Rhamnose, Glucuronic Acid
Water
Skin ConditioningPotassium Cocoyl Glycinate
SurfactantAcrylates/Steareth-20 Methacrylate Crosspolymer
Potassium Cocoate
EmulsifyingHydrogenated Starch Hydrolysate
HumectantSodium Lauroamphoacetate
CleansingLauryl Hydroxysultaine
CleansingPhenoxyethanol
PreservativeSalicylic Acid
MaskingCaprylyl Glycol
EmollientPotassium Hydroxide
BufferingSodium Chloride
MaskingDisodium EDTA
Madecassoside
AntioxidantCentella Asiatica Extract
CleansingGlycosyl Trehalose
Emulsion StabilisingAsiaticoside
AntioxidantGlycerin
HumectantButylene Glycol
HumectantHydrogenated Lecithin
EmulsifyingVaccinium Angustifolium Fruit Extract
Skin ProtectingCeramide NP
Skin ConditioningCeramide As
Skin ConditioningCeramide Ns
Skin ConditioningCeramide AP
Skin ConditioningCeramide EOP
Skin ConditioningWater, Potassium Cocoyl Glycinate, Acrylates/Steareth-20 Methacrylate Crosspolymer, Potassium Cocoate, Hydrogenated Starch Hydrolysate, Sodium Lauroamphoacetate, Lauryl Hydroxysultaine, Phenoxyethanol, Salicylic Acid, Caprylyl Glycol, Potassium Hydroxide, Sodium Chloride, Disodium EDTA, Madecassoside, Centella Asiatica Extract, Glycosyl Trehalose, Asiaticoside, Glycerin, Butylene Glycol, Hydrogenated Lecithin, Vaccinium Angustifolium Fruit Extract, Ceramide NP, Ceramide As, Ceramide Ns, Ceramide AP, Ceramide EOP
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Disodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.
This ingredient mainly works behind the scenes and helps with:
On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.
One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).
Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.
You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.
Learn more about Disodium EDTAGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinPhenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).
It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.
On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.
Another perk of this ingredient is that it stays functional across a wide pH range (3-10).
You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.
Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.
Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.
Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.
Learn more about PhenoxyethanolPotassium Cocoate is basically a liquid coconut soap that's made by cooking coconut oil with potassium hydroxide.
It's a cleanser, foaming, and emulsifying agent that mostly shows up in soaps and "natural" cleansers.
Rinse-off concentrations typically range from 2-25%.
The finished product sits at a fairly high pH (~9-11) because it's a true soap. This just means it can feel drying or slightly stripping if a formula isn't balance with emollients.
Allergy and irritation risk is low as this ingredient was found to be an irritant in less than 1% of subjects (2 of these subjects had active psoriasis and 3 had active eczema).
Fungal acne: The Malassezia yeast feeds on fatty acids in the ~C12-24 range, and Potassium Cocoate is made of exactly those (Lauric C12, Myristic C14, Palmitic C16, Oleic C18:1). Lab studies have shown the yeast can take up Lauric Acid and grows readily on Palmitic Acid. Therefore, this ingredient may not be fungal acne safe.
Learn more about Potassium CocoatePotassium Cocoyl Glycinate is an amino acid-based surfactant and cleaning agent. This ingredient can be derived from animals or plants. It may also be synthetically created from fatty acids of the coconut and glycine.
Potassium Cocoyl Glycinate is a gentle surfactant. Surfactants help gather the dirt, oil, and other pollutants from your skin to be rinsed away. It is a mild cleanser and naturally produces foam.
Potassium Hydroxide (also known as potash) is a strong alkaline ingredient that does one job: it nudges a product's pH up so the whole formula lands in a skin-friendly range.
It's also the base that turns oils into liquid soap during the soap making process.
An expert safety panel reviewed it and found it safe when formulations are made to be non-irritating.
As a pH adjuster, it's typically used well under 1% though regulatory caps go much higher: 5% in nail cuticle removers and 2-4.5% in hair straighteners.
Though there is some concern for irritation from raw or high pH material, a well-balanced formula will be a non-issue for the vast majority of people.
Learn more about Potassium HydroxideSalicylic Acid (also known as beta hydroxy acid or BHA) is a well-known ingredient for treating skin that struggles with acne and clogged pores. It exfoliates both the skin's surface and deep within the pores to help clear out buildup, control oil, and reduce inflammation.
Unlike AHAs (alpha hydroxy acids), salicylic acid is oil-soluble. This allows it to penetrate into pores which makes it especially effective for treating blackheads and preventing future breakouts.
Salicylic acid is also known for its soothing properties. It has a similar structure to aspirin and can calm inflamed or irritated skin, making it a good option for acne-prone skin that is also sensitive.
Concentrations of 0.5-2% are recognized by the U.S. FDA as an over-the-counter topical acne product.
It can cause irritation and/or dryness if one's skin already has a compromised moisture barrier, so it's best to focus on repairing that before introducing this ingredient into your routine.
While salicylic acid does not increase sun sensitivity, it’s still important to wear sunscreen daily to protect your skin.
If you are looking for the ingredient called BHA or Butylated Hydroxyanisole, click here.
Learn more about Salicylic AcidWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water