What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Ethylhexyl Salicylate 4.5%
UV AbsorberOctocrylene 5%
UV AbsorberTitanium Dioxide 0.84%
Cosmetic ColorantZinc Oxide 3.04%
Cosmetic ColorantWater
Skin ConditioningDicaprylyl Ether
EmollientCaprylic/Capric Triglyceride
MaskingPolyglyceryl-3 Polyricinoleate
EmulsifyingTribehenin
EmollientGlycerin
HumectantSilica
AbrasiveMagnesium Stearate
Cosmetic ColorantSodium Potassium Aluminum Silicate
Butylene Glycol
HumectantMagnesium Sulfate
Sorbitan Isostearate
EmulsifyingSodium Chloride
MaskingPhenoxyethanol
PreservativeZinc Stearate
Cosmetic ColorantStearalkonium Bentonite
Gel FormingPolyglyceryl-3 Diisostearate
EmulsifyingEthylhexylglycerin
Skin ConditioningPotassium Sorbate
PreservativeMica
Cosmetic ColorantTocopherol
AntioxidantAscorbyl Palmitate
AntioxidantSodium Hyaluronate
HumectantAlpha-Glucan Oligosaccharide
CleansingPolymnia Sonchifolia Root Juice
Skin ConditioningMaltodextrin
AbsorbentRubus Idaeus Leaf Extract
Skin ConditioningRosa Hybrid Flower Extract
Skin ConditioningVitis Vinifera Fruit Extract
Skin ConditioningLactobacillus
Skin ConditioningCI 77891
Cosmetic ColorantIron Oxides
CI 77491
Cosmetic ColorantCI 77492
Cosmetic ColorantCI 77499
Cosmetic ColorantEthylhexyl Salicylate 4.5%, Octocrylene 5%, Titanium Dioxide 0.84%, Zinc Oxide 3.04%, Water, Dicaprylyl Ether, Caprylic/Capric Triglyceride, Polyglyceryl-3 Polyricinoleate, Tribehenin, Glycerin, Silica, Magnesium Stearate, Sodium Potassium Aluminum Silicate, Butylene Glycol, Magnesium Sulfate, Sorbitan Isostearate, Sodium Chloride, Phenoxyethanol, Zinc Stearate, Stearalkonium Bentonite, Polyglyceryl-3 Diisostearate, Ethylhexylglycerin, Potassium Sorbate, Mica, Tocopherol, Ascorbyl Palmitate, Sodium Hyaluronate, Alpha-Glucan Oligosaccharide, Polymnia Sonchifolia Root Juice, Maltodextrin, Rubus Idaeus Leaf Extract, Rosa Hybrid Flower Extract, Vitis Vinifera Fruit Extract, Lactobacillus, CI 77891, Iron Oxides, CI 77491, CI 77492, CI 77499
Water
Skin ConditioningCyclopentasiloxane
EmollientAlcohol Denat.
AntimicrobialPhenyl Trimethicone
Skin ConditioningGlycerin
HumectantPEG-10 Dimethicone
Skin ConditioningBis-PEG/PPG-14/14 Dimethicone
EmollientDimethicone
EmollientMagnesium Sulfate
Ethylhexyl Hydroxystearate
EmollientTalc
AbrasiveSilica
AbrasivePEG/PPG/Polybutylene Glycol-8/5/3 Glycerin
HumectantDisodium Stearoyl Glutamate
CleansingDimethicone/Polyglycerin-3 Crosspolymer
CleansingPolymethyl Methacrylate
Tocopheryl Acetate
AntioxidantAluminum Hydroxide
EmollientMagnesium Stearate
Cosmetic ColorantSilica Silylate
EmollientDipropylene Glycol
HumectantAlumina
AbrasiveBHT
AntioxidantSodium Citrate
BufferingTocopherol
AntioxidantIsopropyl Alcohol
SolventTitanium Dioxide
Cosmetic ColorantIron Oxides
CI 77163
Cosmetic ColorantWater, Cyclopentasiloxane, Alcohol Denat., Phenyl Trimethicone, Glycerin, PEG-10 Dimethicone, Bis-PEG/PPG-14/14 Dimethicone, Dimethicone, Magnesium Sulfate, Ethylhexyl Hydroxystearate, Talc, Silica, PEG/PPG/Polybutylene Glycol-8/5/3 Glycerin, Disodium Stearoyl Glutamate, Dimethicone/Polyglycerin-3 Crosspolymer, Polymethyl Methacrylate, Tocopheryl Acetate, Aluminum Hydroxide, Magnesium Stearate, Silica Silylate, Dipropylene Glycol, Alumina, BHT, Sodium Citrate, Tocopherol, Isopropyl Alcohol, Titanium Dioxide, Iron Oxides, CI 77163
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinMagnesium Stearate is a salt that is 2 parts stearic acid and 1 part magnesium.
It is a white powder that can be used to add bulk and color to products by binding to oil ingredients.
Magnesium Sulfate is a salt. More specifically, it is an epsom salt, or the bath salt used to help relieve muscle aches.
Despite having āsulfateā in the name, it isnāt a surfactant or cleansing agent like sodium lauryl sulfate. Unlike those sulfates, magnesium sulfate doesnāt have the same cleansing or foaming properties (it's simply a type of salt).
In cosmetics, Magnesium Sulfate is used to thicken a product or help dilute other solids. It is a non-reactive and non-irritating ingredient.
One study shows magnesium deficiency may lead to inflammation of the skin. Applying magnesium topically may help reduce inflammation.
You can find this ingredient in sea water or mineral deposits.
Learn more about Magnesium SulfateSilica, also known as silicon dioxide, is a naturally occurring mineral. It is used as a fine, spherical, and porous powder in cosmetics.
Though it has exfoliant properties, the function of silica varies depending on the product.
The unique structure of silica enhances the spreadability and adds smoothness, making it a great texture enhancer.
It is also used as an active carrier, emulsifier, and mattifier due to its ability to absorb excess oil.
In some products, tiny microneedles called spicules are made from silica or hydrolyzed sponge. When you rub them in, they lightly polish away dead skin layers and enhance the penetration of active ingredients.
Learn more about SilicaTitanium dioxide is a mineral UV filter widely used in sunscreens and cosmetics.
It is one of only two UV filters officially classified as āmineralā by regulatory agencies, the other being zinc oxide.
Titanium dioxide provides broad-spectrum protection mostly in the UVB and UVAII range, with some protection in the UVAI range.
While its UVA protection isnāt as strong as zinc oxideās, the difference is minor.
A common myth is that mineral UV filters reflect UV light. However, modern research shows titanium dioxide absorbs UV radiation like chemical filters (~95% absorption & 5% reflection).
Thanks to its non-irritating nature, titanium dioxide is suitable for sensitive, acne-prone, or redness-prone skin. It is unlikely to cause "eye sting" like other sunscreen ingredients.
A major drawback of this ingredient is its white cast and thick texture. This is why mineral sunscreens often leave a white cast and are less cosmetically elegant than chemical/hybrid sunscreens.
To improve white cast and spreadability, micronized or nano-sized titanium dioxide is often used.
There are ongoing concerns surrounding nano-titanium oxide's impact on marine ecosystems.
There is no conclusive evidence that any form of titanium oxide (or any other sunscreen ingredients) will cause harm to marine ecosystems or coral reefs. The science is still developing but many consumers are keeping a close eye on this issue.
Please note, many destinations have reef-safety sunscreen rules. For instance, the U.S. Virgin Islands advises all visitors to use non-nano mineral sunscreens.
Nano mineral sunscreens once raised safety concerns about absorption into skin.
Extensive research has shown that they do not penetrate healthy or damaged skin; they remain safely on the surface and the top layer of dead skin (stratum corneum).
You'll likely find titanium dioxide bundled with alumina, silica, or dimethicone. These ingredients help make titanium dioxide highly photostable; this prevents it from interacting with other formula components under UV light.
Learn more about Titanium DioxideTocopherol is a fat-soluble antioxidant known as Vitamin E.
You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.
Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.
It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.
This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.
This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.
In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.
Concentrations usually range from 0.1-1% in most leave-on products.
Learn more about TocopherolWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about WaterThis ingredient is a combination of red, black, and yellow iron oxide pigments. This combination of colors is usually found in foundation, because it results in a "skin" color.
The EU typically uses CI numbers for colorants when applicable, such as CI 77489. In the US, iron oxides are regulated as color additives and "iron oxides" is the most commonly used name in US cosmetic practice.
A 2021 paper looked at skincare formulations containing iron oxides and found that they reduced transmission of blue light when measured optically. In simple terms, the pigment particles helped block or scatter part of the visible light spectrum in lab testing and the authors suggest this could translate into better protection against blue-light-related skin effects.
There is also clinical and experimental research showing that tinted products containing iron oxides can reduce visible light-induced pigmentation:
Please note, whether a product reduces visible or blue light depends on things like:
In the EU's CosIng database, iron oxides are only listed as a colorant. CosIng groups ingredients by their main cosmetic role, such as colorant, preservative, or UV filter.
Though studies say iron oxides can "attenuate blue light", they're describing an optical property and not an officially recognized cosmetic function.
So CosIng isnāt contradicting the research. Itās just classifying iron oxides by what they officially are: pigments that add color.
Learn more about Iron Oxides