What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningSilica
AbrasivePropanediol
SolventKaolin
AbrasiveGlycerin
HumectantDiatomaceous Earth
Abrasive1,2-Hexanediol
Skin ConditioningButylene Glycol
HumectantCamellia Sinensis Seed Extract
HumectantBetaine
HumectantCarbomer
Emulsion StabilisingTromethamine
BufferingHydroxyacetophenone
AntioxidantTitanium Dioxide
Cosmetic ColorantAmmonium Acryloyldimethyltaurate/Vp Copolymer
Cellulose
AbsorbentCharcoal Powder
AbrasiveCalamine
AbsorbentCellulose Gum
Emulsion StabilisingXanthan Gum
EmulsifyingSilica Dimethyl Silylate
EmollientDisodium EDTA
Ethylhexylglycerin
Skin ConditioningEthylcellulose
Gardenia Florida Fruit Extract
Skin ConditioningDextrin
AbsorbentLauric Acid
CleansingZea Mays Starch
AbsorbentAluminum Hydroxide
EmollientMannitol
HumectantHyaluronic Acid
HumectantHydrolyzed Hyaluronic Acid
HumectantSodium Hyaluronate
HumectantPolyglyceryl-10 Stearate
Skin ConditioningSalicylic Acid
MaskingWater, Silica, Propanediol, Kaolin, Glycerin, Diatomaceous Earth, 1,2-Hexanediol, Butylene Glycol, Camellia Sinensis Seed Extract, Betaine, Carbomer, Tromethamine, Hydroxyacetophenone, Titanium Dioxide, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Cellulose, Charcoal Powder, Calamine, Cellulose Gum, Xanthan Gum, Silica Dimethyl Silylate, Disodium EDTA, Ethylhexylglycerin, Ethylcellulose, Gardenia Florida Fruit Extract, Dextrin, Lauric Acid, Zea Mays Starch, Aluminum Hydroxide, Mannitol, Hyaluronic Acid, Hydrolyzed Hyaluronic Acid, Sodium Hyaluronate, Polyglyceryl-10 Stearate, Salicylic Acid
Kaolin
AbrasiveStearic Acid
CleansingBentonite
AbsorbentCetearyl Alcohol
EmollientCetyl Ethylhexanoate
EmollientGlycerin
HumectantCaprylic/Capric Triglyceride
MaskingGlyceryl Stearate
EmollientPolysorbate 20
EmulsifyingRice Ferment Filtrate
Skin ConditioningPEG-100 Stearate
SurfactantHydroxyacetophenone
AntioxidantCellulose Gum
Emulsion StabilisingXanthan Gum
EmulsifyingAllantoin
Skin ConditioningEthylhexylglycerin
Skin ConditioningMonarda Didyma Leaf Extract
Skin ConditioningDipropylene Glycol
HumectantDisodium EDTA
Ocimum Basilicum Leaf Extract
Skin ConditioningPentylene Glycol
Skin ConditioningSalvia Officinalis Leaf Extract
CleansingButylene Glycol
Humectant10-Hydroxydecanoic Acid
Skin ConditioningSebacic Acid
Buffering1,10-Decanediol
SolventKaolin, Stearic Acid, Bentonite, Cetearyl Alcohol, Cetyl Ethylhexanoate, Glycerin, Caprylic/Capric Triglyceride, Glyceryl Stearate, Polysorbate 20, Rice Ferment Filtrate, PEG-100 Stearate, Hydroxyacetophenone, Cellulose Gum, Xanthan Gum, Allantoin, Ethylhexylglycerin, Monarda Didyma Leaf Extract, Dipropylene Glycol, Disodium EDTA, Ocimum Basilicum Leaf Extract, Pentylene Glycol, Salvia Officinalis Leaf Extract, Butylene Glycol, 10-Hydroxydecanoic Acid, Sebacic Acid, 1,10-Decanediol
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:
Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
Learn more about Butylene GlycolCellulose Gum is a water-soluble polymer that comes from cellulose. It is used to change the texture of a product and to help stabilize emulsions.
As an emulsifier, cellulose gum specifically thicken the texture of water-based products.
This ingredient is considered hypoallergenic and non-toxic. Cellulose Gum can be found in cosmetics, food, and other household goods such as paper products.
Learn more about Cellulose GumDisodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.
This ingredient mainly works behind the scenes and helps with:
On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.
One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).
Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.
You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.
Learn more about Disodium EDTAEthylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Learn more about EthylhexylglycerinGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinHydroxyacetophenone is a small phenolic molecule that earns its place in a formulas as an antioxidant and preservative booster.
As a phenol, it is able to neutralize free radicals to protect both the product and the skin from oxidative stress.
Though it can't kill microbes on its own, it works as a good supporting agent when combined with other preservatives like Phenoxyethanol or 1,2-Hexanediol.
This ingredient naturally occurs as piceol in Norwegian spruce needles (~0.4-1.1% dry weight and in cloudberries). Though the cosmetic-grade material is synthesized for purity and consistency.
You'll usually see it used at low levels and suppliers recommend up to 1% added to a water phase.
Safety testing was done at concentrations like 0.05% in SPF products and 0.5% in a Human Repeated Insult Patch Test. The safety evidence is assuring; this ingredient is safe for cosmetics in current use and also holds safety status as a food flavoring as well.
An honest caveat: the "soothing" and "anti-inflammatory" claims come mostly from supplier marketing rather than published clinical trials. The Cosmetic Ingredient Review's own literature search found no useful efficacy studies on this ingredient.
So the antioxidant and preservative-boosting roles are the well supported ones while the calming benefit is plausible but thinly evidenced.
Overall, this is a well-tolerated, low-irritation multitasker that quietly helps a formula stay fresh and stable.
Learn more about HydroxyacetophenoneKaolin is a clay. It is used for oil control and to help minimize pores. Like other clays, kaolin has the ability to absorb excess sebum or oil. This can help clean out pores and mattify the skin.
Some types of kaolin may have exfoliating properties. When water is added to kaolin, it becomes a paste with small abrasive particles.
Most kaolin is a white color, but may be pink/orange/red depending on where it comes from.
The name 'kaolin' comes from a Chinese village named 'Gaoling'. Kaolin clay comes from rocks rich in kaolinite. Kaolinite, the mineral, has a silicate layered structure. Kaolinite is formed from chemical weathering of aluminum siilicate minerals.
Besides skincare, kaolin is commonly used to make glossy paper, in ceramics, toothpaste, and as medicine to soothe stomach issues.
Learn more about KaolinXanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.
On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.
Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.
Learn more about Xanthan Gum