What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
4-Methylbenzylidene Camphor
UV Absorber
Ethylhexyl Triazone
UV Absorber
Butyl Methoxydibenzoylmethane
UV Absorber
Octocrylene
UV Absorber
Caprylyl Glycol
Emollient
Caprylic Acid
CleansingWater
Skin ConditioningC12-15 Alkyl Benzoate
AntimicrobialCera Alba
Emollient
Silica
Abrasive
PEG-15 Cocamine
EmulsifyingAmmonium Acryloyldimethyltaurate/Vp Copolymer
PEG-40 Stearate
Emulsifying
Saccharide Isomerate
Humectant
CI 77491
Cosmetic ColorantCaprylhydroxamic Acid
Glycerin
Humectant
CI 77492
Cosmetic ColorantHydroxyethylcellulose
Emulsion StabilisingPanthenol
Skin Conditioning
Citric Acid
Buffering
Sodium Citrate
BufferingCI 77499
Cosmetic ColorantAloe Barbadensis Leaf Juice
Skin Conditioning
Tocopheryl Acetate
Antioxidant
4-Methylbenzylidene Camphor, Ethylhexyl Triazone, Butyl Methoxydibenzoylmethane, Octocrylene, Caprylyl Glycol, Caprylic Acid, Water, C12-15 Alkyl Benzoate, Cera Alba, Silica, PEG-15 Cocamine, Ammonium Acryloyldimethyltaurate/Vp Copolymer, PEG-40 Stearate, Saccharide Isomerate, CI 77491, Caprylhydroxamic Acid, Glycerin, CI 77492, Hydroxyethylcellulose, Panthenol, Citric Acid, Sodium Citrate, CI 77499, Aloe Barbadensis Leaf Juice, Tocopheryl Acetate
Butane
Water
Skin ConditioningHomosalate
Skin Conditioning
Octocrylene
UV Absorber
Glycerin
Humectant
Dimethicone
Emollient
Ethylhexyl Salicylate
UV Absorber
Dicaprylyl Carbonate
EmollientNylon-12
Diisopropyl Sebacate
EmollientButyl Methoxydibenzoylmethane
UV Absorber
Styrene/Acrylates Copolymer
P-Anisic Acid
Masking
Cyclohexasiloxane
Emollient
Tocopherol
Antioxidant
Sodium Chloride
MaskingSodium Hyaluronate
Humectant
Phenoxyethanol
Preservative
Thermus Thermophillus Ferment
Skin ConditioningPEG-32
HumectantPEG-8 Laurate
Emulsifying
Ethylhexyl Triazone
UV Absorber
Triethanolamine
BufferingPolyglyceryl-6 Polyricinoleate
Emulsifying
Poly C10-30 Alkyl Acrylate
Emulsion StabilisingPentylene Glycol
Skin Conditioning
Drometrizole Trisiloxane
UV Absorber
Caprylyl Glycol
Emollient
Disodium EDTA
Methyl Methacrylate Crosspolymer
Potassium Sorbate
Preservative
Scutellaria Baicalensis Extract
AntimicrobialScutellaria Baicalensis Root Extract
Astringent
Parfum
Masking
Butane, Water, Homosalate, Octocrylene, Glycerin, Dimethicone, Ethylhexyl Salicylate, Dicaprylyl Carbonate, Nylon-12, Diisopropyl Sebacate, Butyl Methoxydibenzoylmethane, Styrene/Acrylates Copolymer, P-Anisic Acid, Cyclohexasiloxane, Tocopherol, Sodium Chloride, Sodium Hyaluronate, Phenoxyethanol, Thermus Thermophillus Ferment, PEG-32, PEG-8 Laurate, Ethylhexyl Triazone, Triethanolamine, Polyglyceryl-6 Polyricinoleate, Poly C10-30 Alkyl Acrylate, Pentylene Glycol, Drometrizole Trisiloxane, Caprylyl Glycol, Disodium EDTA, Methyl Methacrylate Crosspolymer, Potassium Sorbate, Scutellaria Baicalensis Extract, Scutellaria Baicalensis Root Extract, Parfum
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Also known as Avobenzone, this ingredient is an oil-soluble used to absorb the full spectrum of UVA rays (peak 357 nm).
It's one of the most effective UVA filters available but has a major caveat of photostability: avobenzone is susceptible to photodegradation.
This means it can lose efficacy when exposed to sunlight without the help of a stabilizing agent.
Studies show antioxidants (like vitamin E or vitamin C) and some UV filters (like octocrylene and Tinosorb S) can meaningfully improve its stability in a formulation.
The maximum allowable concentration according to regulation is 3% in the US + Canada, and 5% in the EU, Australia, China, Korea, and ASEAN countries.
It has a well-support safety profile: a comprehensive 2025 review found minimal toxicity with no evidence of carcinogenicity.
Overall, avobenzone is a safe and regulated ingredient used in sunscreen for over 40 years.
Learn more about Butyl MethoxydibenzoylmethaneCaprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.
Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.
Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).
Learn more about Caprylyl GlycolEthylhexyl Triazone (aka Octyl Triazone) is an oil-soluble organic UVB filter. It has peak absorption around 314 nm, right in the middle of the UVB range.
This ingredient is described as one of the most effective UVB filters available and small concentrations are enough to deliver a high SPF thanks to its strong UV absorbing power.
Formulators love it for its stability; its ability to filter UV stays practically unchanged even under intense radiation and it can also help boost the photostability of less stable filters like avobenzone.
It's also a great pick for water resistant products because it's insoluble in water and has a good affinity for keratin.
Because it's a big, heavy molecule, the European Scientific Committee has found to to have very low dermal penetration and negative results for allergenicity.
In vitro testing also showed a low absorption rate and clean results on irritation.
Typical use levels are 1-5% with 5% being the maximum in the EU, Japan, and other markets that allow it. However, this ingredient is not approved yet in the US or Canada.
Learn more about Ethylhexyl TriazoneGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinOctocrylene is an oil-soluble organic UV filter that mainly absorbs UVB and short wave UVA II light.
Its real superpower is teamwork: octocrylene is remarkably photostable and is most famous for stabilizing avobenzone (the workhorse UVA filter).
This ingredient is commonly used to enhance both UVB and UVA protection due to its unique property in stabilizing avobenzone. It also pulls double duty by boosting water resistance and giving formulas a smooth, spreadable feel.
The EU's Scientific Committee on Consumer Safety (SCCS) has deemed octocrylene to be safe as a UV-filter at concentrations up to 10% (capped at 9% in propellant sprays). The US also permits it up to 10%.
Two things worth knowing:
You'll usually see this ingredient used in concentrations between 2-10% (higher amounts when used as a stabilizer for avobenzone).
Learn more about OctocryleneWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water
