Garnier Ambre Solaire Kids Sensitive Advanced Sun Cream Spray SPF 50+ Versus Cosmed Sun Essential Fluid SPF 50 PA++++
What's inside
What's inside
Key Ingredients
Benefits
Concerns
No concerns
Ingredients Side-by-side
Water
Skin ConditioningDiethylamino Hydroxybenzoyl Hexyl Benzoate
UV Filter
Alcohol Denat.
Antimicrobial
Homosalate
Skin Conditioning
Ethylhexyl Salicylate
UV Absorber
Butyl Methoxydibenzoylmethane
UV Absorber
Octocrylene
UV Absorber
Glycerin
Humectant
Propanediol
Solvent
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Skin Conditioning
C12-22 Alkyl Acrylate/Hydroxyethylacrylate Copolymer
StabilisingDiisopropyl Adipate
EmollientDiisopropyl Sebacate
EmollientDicaprylyl Ether
Emollient
Ethylhexyl Triazone
UV Absorber
Tocopherol
Antioxidant
Hydroxyacetophenone
Antioxidant
Sodium Polyacrylate
Absorbent
Trisodium Ethylenediamine Disuccinate
Triethanolamine
BufferingDrometrizole Trisiloxane
UV Absorber
Aloe Barbadensis Leaf Juice Powder
Skin Conditioning
Caprylyl Glycol
Emollient
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Emulsion StabilisingWater, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Alcohol Denat., Homosalate, Ethylhexyl Salicylate, Butyl Methoxydibenzoylmethane, Octocrylene, Glycerin, Propanediol, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, C12-22 Alkyl Acrylate/Hydroxyethylacrylate Copolymer, Diisopropyl Adipate, Diisopropyl Sebacate, Dicaprylyl Ether, Ethylhexyl Triazone, Tocopherol, Hydroxyacetophenone, Sodium Polyacrylate, Trisodium Ethylenediamine Disuccinate, Triethanolamine, Drometrizole Trisiloxane, Aloe Barbadensis Leaf Juice Powder, Caprylyl Glycol, Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Water
Skin ConditioningMethylene Bis-Benzotriazolyl Tetramethylbutylphenol
UV Filter
Pentylene Glycol
Skin Conditioning
C12-15 Alkyl Benzoate
AntimicrobialCaprylyl Methicone
Skin Conditioning
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Skin Conditioning
C12-16 Alcohols
EmollientHydrogenated Polyisobutene
EmollientPolysilicone-15
UV Filter
Dimethicone
Emollient
Ethylhexyl Triazone
UV Absorber
Potassium Cetyl Phosphate
EmulsifyingZinc Oxide
Cosmetic Colorant
Palm Acid
Cleansing
Hydrogenated Lecithin
Emulsifying
Caprylyl Glycol
Emollient
Ectoin
Skin Conditioning
Cannabis Sativa Seed Oil
Emollient
Squalane
Emollient
Sodium Polyacrylate
Absorbent
Bisabolol
Antioxidant
Helianthus Annuus Seed
Skin Conditioning
Silica
Abrasive
Glycine Soja Lipids
Skin ConditioningAcrylates/C10-30 Alkyl Acrylate Crosspolymer
Emulsion StabilisingAcacia Senegal Gum
MaskingHippophae Rhamnoides Acid
EmollientRosmarinus Officinalis Leaf Extract
AntimicrobialTocopherol
Antioxidant
Crocus Chrysanthus Bulb Extract
Skin ConditioningWater, Methylene Bis-Benzotriazolyl Tetramethylbutylphenol, Pentylene Glycol, C12-15 Alkyl Benzoate, Caprylyl Methicone, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, C12-16 Alcohols, Hydrogenated Polyisobutene, Polysilicone-15, Dimethicone, Ethylhexyl Triazone, Potassium Cetyl Phosphate, Zinc Oxide, Palm Acid, Hydrogenated Lecithin, Caprylyl Glycol, Ectoin, Cannabis Sativa Seed Oil, Squalane, Sodium Polyacrylate, Bisabolol, Helianthus Annuus Seed, Silica, Glycine Soja Lipids, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Acacia Senegal Gum, Hippophae Rhamnoides Acid, Rosmarinus Officinalis Leaf Extract, Tocopherol, Crocus Chrysanthus Bulb Extract
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic polymer. It is used to thicken, emulsify, and improve the texture of products.
As an emulsifier, it helps stabilize oil-in-water emulsions to give products an elegant feel when applied.
It can also form a thin protective film on skin. One study found that a formula using this polymer helped slow down how quickly other ingredients (like DEET) were absorbed through skin.
A 2024 study of over 1,300 patients confirmed that sensitization to this ingredient is rare. It is also non-mutagenic and has a clean track record.
Learn more about Acrylates/C10-30 Alkyl Acrylate CrosspolymerYou might know this ingredient as Tinosorb S or Bemotrizinol. It is a UV filter that covers both UVA and UVB rays.
This ingredient has two peak UV absorption peaks ( 310 and 340 nm) and is able to absorb both UV-A and UV-B rays. This ingredient works by preventing UV rays from reaching and damaging your skin.
On top of that - it is highly photostable and helps prevent the photodegration of other sunscreen ingredients such as avobenzone.
Tinosorb S is allowed in the EU, Australia, and Asia. It is close to being approved by the FDA and we'll hopefully get this ingredient in the U.S. by late 2026.
Fun fact: Tinosorb S is the most effective UV absorber at maximum concentration (measured by SPF) permitted in the EU.
This ingredient is oil-soluble, so your oil-cleansers will take this right off at night.
Learn more about Bis-Ethylhexyloxyphenol Methoxyphenyl TriazineCaprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.
Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.
Because it is not a free-fatty acid or alcohol, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).
Learn more about Caprylyl GlycolEthylhexyl Triazone is a modern chemical sunscreen that protects from UV-B radiation.
It is the most effective of existing UV-B filters, as it provides the highest level of photo-stable absorption. It protects from the entire UV-B range (280 to 320nm), with it's highest level of protection at 314nm.
Ethylhexyl Triazone is oil soluble, oderless and colorless, which mean it is able to be incorporated into a variety of different formulations.
It is not currently available within the United States due to slow changing FDA regulations. Outside of the US, it is used in formulations at concentrations up to 5%.
Learn more about Ethylhexyl TriazoneSodium Polyacrylate is the sodium salt of polyacrylic acid. It is used as an absorber, emollient, and stabilizer.
This ingredient is a super-absorbent polymer - meaning it can absorb 100 to 1000 times its mass in water. As an emollient, Sodium Polyacrylate helps soften and soothe skin. Emollients work by creating a barrier to trap moisture in. This helps keep your skin hydrated.
Tocopherol is a fat-soluble antioxidant known as Vitamin E.
You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.
Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.
It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.
This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.
This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.
In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.
Concentrations usually range from 0.1-1% in most leave-on products.
Learn more about TocopherolWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water
