What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Titanium Dioxide 4.5%
Cosmetic ColorantZinc Oxide 17.2%
Cosmetic ColorantDimethicone
EmollientWater
Skin ConditioningDiisopropyl Sebacate
EmollientDiphenylsiloxy Phenyl Trimethicone
Skin ConditioningDipropylene Glycol
HumectantGlycerin
HumectantSorbitan Sesquiisostearate
EmulsifyingPolyhydroxystearic Acid
EmulsifyingLauryl PEG-9 Polydimethylsiloxyethyl Dimethicone
Skin ConditioningSilica
AbrasiveAminoethanesulfinic Acid
AntioxidantThiotaurine
AntioxidantScutellaria Baicalensis Root Extract
AstringentPaeonia Albiflora Root Extract
Skin ConditioningSodium Hyaluronate
HumectantDipotassium Glycyrrhizate
HumectantGinkgo Biloba Leaf Extract
Skin ConditioningPEG/PPG-14/7 Dimethyl Ether
Skin ConditioningOnonis Spinosa Root Extract
AntiseborrhoeicCamellia Japonica Flower Extract
EmollientGarcinia Mangostana Bark Extract
Skin ConditioningTrehalose
HumectantSpirulina Platensis Extract
Skin ProtectingSoluble Collagen
HumectantAluminum Hydroxide
EmollientTriethoxycaprylylsilane
Stearic Acid
CleansingDisteardimonium Hectorite
StabilisingButylene Glycol
HumectantTrisodium EDTA
Isostearic Acid
CleansingSodium Citrate
BufferingCitric Acid
BufferingSodium Metabisulfite
AntioxidantPrunus Yedoensis Leaf Extract
Skin ConditioningSyzygium Jambos Leaf Extract
Skin ConditioningTocopherol
AntioxidantMica
Cosmetic ColorantDisodium Phosphate
BufferingRiboflavin
Cosmetic ColorantErgothioneine
AntioxidantSodium Phosphate
BufferingPhenoxyethanol
PreservativeBenzoic Acid
MaskingTitanium Dioxide 4.5%, Zinc Oxide 17.2%, Dimethicone, Water, Diisopropyl Sebacate, Diphenylsiloxy Phenyl Trimethicone, Dipropylene Glycol, Glycerin, Sorbitan Sesquiisostearate, Polyhydroxystearic Acid, Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone, Silica, Aminoethanesulfinic Acid, Thiotaurine, Scutellaria Baicalensis Root Extract, Paeonia Albiflora Root Extract, Sodium Hyaluronate, Dipotassium Glycyrrhizate, Ginkgo Biloba Leaf Extract, PEG/PPG-14/7 Dimethyl Ether, Ononis Spinosa Root Extract, Camellia Japonica Flower Extract, Garcinia Mangostana Bark Extract, Trehalose, Spirulina Platensis Extract, Soluble Collagen, Aluminum Hydroxide, Triethoxycaprylylsilane, Stearic Acid, Disteardimonium Hectorite, Butylene Glycol, Trisodium EDTA, Isostearic Acid, Sodium Citrate, Citric Acid, Sodium Metabisulfite, Prunus Yedoensis Leaf Extract, Syzygium Jambos Leaf Extract, Tocopherol, Mica, Disodium Phosphate, Riboflavin, Ergothioneine, Sodium Phosphate, Phenoxyethanol, Benzoic Acid
Zinc Oxide 22.75%
Cosmetic ColorantAdansonia Digitata Seed Extract
Skin ConditioningCaprylic/Capric Triglyceride
MaskingCetearyl Alcohol
EmollientCetearyl Glucoside
EmulsifyingCitrullus Lanatus Seed Oil
EmollientCoco-Caprylate/Caprate
EmollientDisodium EDTA
Ethylhexylglycerin
Skin ConditioningGluconolactone
Skin ConditioningGlycerin
HumectantHydrolyzed Soy Protein
HumectantIron Oxides
Isostearic Acid
CleansingOctyldodecanol
EmollientPEG-30 Dipolyhydroxystearate
EmulsifyingPhenoxyethanol
PreservativePolyglyceryl-3 Polyricinoleate
EmulsifyingProline
Skin ConditioningWater
Skin ConditioningRice Amino Acids
Skin ConditioningSodium Benzoate
MaskingSodium Chloride
MaskingXanthan Gum
EmulsifyingZinc Oxide 22.75%, Adansonia Digitata Seed Extract, Caprylic/Capric Triglyceride, Cetearyl Alcohol, Cetearyl Glucoside, Citrullus Lanatus Seed Oil, Coco-Caprylate/Caprate, Disodium EDTA, Ethylhexylglycerin, Gluconolactone, Glycerin, Hydrolyzed Soy Protein, Iron Oxides, Isostearic Acid, Octyldodecanol, PEG-30 Dipolyhydroxystearate, Phenoxyethanol, Polyglyceryl-3 Polyricinoleate, Proline, Water, Rice Amino Acids, Sodium Benzoate, Sodium Chloride, Xanthan Gum
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinIsostearic Acid is a fatty acid and a structural cousin of stearic acid. It is an emulsifier.
The branched structure of this ingredient enhances fluidity and gives it a lighter, less greasy feel compared to other fatty acids. It helps improve texture and consistency because it prevents oil and water phases from separating.
This ingredient is sourced from plant-based oils like soybean or rapeseed.
Clinical studies found no signs of irritation from this ingredient.
Since Isostearic Acid is an 18-carbon fatty acid, it is in the range that Malassezia can feed on. This ingredient may not be fungal acne safe.
You might have seen sources that this ingredient is comedogenic. The original comedogenic testing on rabbit ear actually tested the ester, Isopropyl Isostearate and not Isostearic acid itself. There has been no comedogenic testing done on this ingredient, but it may be worth patch testing if you have acne-prone skin.
Learn more about Isostearic AcidPhenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).
It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.
On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.
Another perk of this ingredient is that it stays functional across a wide pH range (3-10).
You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.
Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.
Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.
Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.
Learn more about PhenoxyethanolWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about WaterZinc Oxide (ZO) is a mineral broad-spectrum UV filter and the broadest-spectrum filter recognized by the FDA. It covers everything from UVB through to long-wave UVA.
On top of sun protection, it has skin protectant and skin-soothing properties too.
Here's a myth worth busting: mineral filters are usually described as working by "reflecting" or "bouncing" UV off your skin.
That's mostly not true: when researchers actually measured it, ZO and Titanium Dioxide reflect only about 4-5% of UV (less than SPF 2 worth of protection).
The vast majority of the work (~95%) is done by absorption, similar to chemical UV filters. ZO is a semiconductor that absorbs UV photos through its energy band gap.
So the old "physical blocker vs. chemical absorber" framing is really an oversimplification.
Zinc Oxide is one of the most effective broad-spectrum UV filters out there. It protects across UVB, UVA2, and UVA1 with a flat, even absorption curve across the whole UVA-UVB range.
That uniform UVA coverage is its standout feature; titanium dioxide skews more toward UVB as its particle size drops so ZO gives more consistent and extended UVA protection.
It's also very photostable. As an inorganic oxide, ZO doesn't break down in sunlight the way some organic filters can, so it holds up over a day of wear.
This ingredient is gentle and soothing, making it go-to for sunscreens aimed at sensitive skin, rosacea, or ecezma-prone skin, babies, and children.
It's also unlikely to cause the "eye sting" that some sunscreen ingredients are known for, and regulatory agencies broadly consider it non-toxic and safe for topical use.
Beyond sun protection, ZO is also a recognized OTC skin protectant. It forms a breathable barrier that shields skin from moisture and irritation while supporting healing. This is why you'll see it as a classic active in diaper rash creams.
The only downside to ZO is that it can leave a visible white cast, especially on deeper skin tones. This is the main reason mineral sunscreens have historically felt less cosmetically elegant than chemical or hybrid formulas.
Zinc Oxide comes in both non-nano and nano forms. The dividing line is 100nm and anything under is classified as a nanomaterial by the EU.
The nano version scatters less visible light which cuts down white case and gives a lighter, more wearable texture.
Another thing worth understanding about formulation:
Uncoated ZO has some inherent photocatalytic activity. This just means it can generate reactive oxygen species under UV. It's exactly why cosmetic-grade ZO is almost always surface-coated; this coating suppresses that reactivity and improves how the powder disperses and feels.
A well-formulated coated ZO largely sidesteps this issue.
Zinc Oxide is commonly used anywhere from 10% up to the regulatory maximum in sunscreens (25%).
Mineral-only broad-spectrum products often land in the 15-25% range to hit higher SPF and UVA values. Keep in mind SPF performance depends heavily on particle size, dispersion, and the rest of the formula, and not just the percentage.
As an OTC skin protectant like diaper creams, ZO typically runs higher at roughly 10-40%.
This ingredient is generally easy to work with and doesn't photodegrade.
The only thing to know is that uncoated ZO can be a bit reactive in a formula.
Under UV, it can break down sensitive ingredients like other actives or UV filters. This is another reason coated versions are standard. ZO can also react with very acidic ingredients or throw off stability of some creams. A good formula will get around this with the right coatings and dispersion.
The EU's Scientific Committee on Consumer Safety has concluded that ZO nanoparticles "can be considered to not pose any risk of adverse effects in humans after application on healthy, intact or sunburnt skin".
You might hear that ZO is "toxic"; this is because an in-vitro (test tube) study suggested micronized ZO had potential phototoxicity. In vivo (human) investigations have disputed this and the results have come back reassuring.
So does ZO penetrate skin? The short answer is no, not in any way that matters.
The most relevant evidence comes from real-world human studies: in one, volunteers applied ZO nanoparticle sunscreen hourly for six hours and daily for five days. The advanced imaging showed the particles stayed on the surface and never reached the living epidermis, and no cellular toxicity was found.
Other in-vivo and ex-vivo work agree; ZO nanoparticles don't cross the stratum corneum, even on flexed, massaged, or barrier-impaired skin.
A small amount of solubilized zinc ions can dissolve off the particles and enter the upper skin. But the quantities are tiny compared to the zinc already naturally present in your body, and studies haven't found this to cause local toxicity.
The sunscreen bans you've heard of (like Hawaii's) are aimed at two chemical filters, Oxybenzone and Octinoxate. ZO itself it not banned and is often recommended instead.
So far, there's no solid evidence that any form of ZO harms reefs. It is an ongoing and active area of study, and worth keeping an eye on.
If you're traveling somewhere with these rules, a non-nano mineral sunscreen is the safe bet.
Learn more about Zinc Oxide