What's inside
What's inside
Key Ingredients
No key ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningGlycerin
HumectantPotassium Cocoyl Glycinate
SurfactantGlycol Distearate
EmollientCocamidopropyl Betaine
CleansingHydroxypropyl Starch Phosphate
Sodium Cocoyl Glycinate
CleansingLauryl Glucoside
CleansingPotassium Cocoate
EmulsifyingSodium PCA
HumectantSnail Secretion Filtrate
Skin ConditioningCeramide NP
Skin ConditioningCeramide AP
Skin ConditioningCeramide EOP
Skin ConditioningAcrylates/Steareth-20 Methacrylate Crosspolymer
Phenoxyethanol
PreservativeSodium Chloride
MaskingCitric Acid
BufferingParfum
MaskingDisodium EDTA
Polyquaternium-7
Triethylene Glycol
MaskingSodium Benzoate
MaskingButylene Glycol
HumectantSodium Lauroyl Lactylate
EmulsifyingEthyl Hexanediol
SolventCholesterol
EmollientPhytosphingosine
Skin ConditioningXanthan Gum
EmulsifyingCarbomer
Emulsion StabilisingWater, Glycerin, Potassium Cocoyl Glycinate, Glycol Distearate, Cocamidopropyl Betaine, Hydroxypropyl Starch Phosphate, Sodium Cocoyl Glycinate, Lauryl Glucoside, Potassium Cocoate, Sodium PCA, Snail Secretion Filtrate, Ceramide NP, Ceramide AP, Ceramide EOP, Acrylates/Steareth-20 Methacrylate Crosspolymer, Phenoxyethanol, Sodium Chloride, Citric Acid, Parfum, Disodium EDTA, Polyquaternium-7, Triethylene Glycol, Sodium Benzoate, Butylene Glycol, Sodium Lauroyl Lactylate, Ethyl Hexanediol, Cholesterol, Phytosphingosine, Xanthan Gum, Carbomer
Water
Skin ConditioningPotassium Cocoyl Glycinate
SurfactantGlycerin
HumectantPotassium Cocoate
EmulsifyingAcrylates/Steareth-20 Methacrylate Crosspolymer
Hydrogenated Starch Hydrolysate
HumectantCaprylyl/Capryl Glucoside
CleansingPanthenol
Skin ConditioningCentella Asiatica Extract
CleansingArginine
MaskingLauryl Hydroxysultaine
CleansingDisodium Cocoamphodiacetate
CleansingSodium Lauryl Glycol Carboxylate
CleansingCaprylyl Glycol
EmollientSodium PCA
HumectantSodium Chloride
MaskingDisodium EDTA
Potassium Hydroxide
BufferingGlycosyl Trehalose
Emulsion StabilisingPhenoxyethanol
PreservativeSodium Sulfite
PreservativeAroma
Water, Potassium Cocoyl Glycinate, Glycerin, Potassium Cocoate, Acrylates/Steareth-20 Methacrylate Crosspolymer, Hydrogenated Starch Hydrolysate, Caprylyl/Capryl Glucoside, Panthenol, Centella Asiatica Extract, Arginine, Lauryl Hydroxysultaine, Disodium Cocoamphodiacetate, Sodium Lauryl Glycol Carboxylate, Caprylyl Glycol, Sodium PCA, Sodium Chloride, Disodium EDTA, Potassium Hydroxide, Glycosyl Trehalose, Phenoxyethanol, Sodium Sulfite, Aroma
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
We don't have a description for Acrylates/Steareth-20 Methacrylate Crosspolymer yet.
Disodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.
This ingredient mainly works behind the scenes and helps with:
On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.
One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).
Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.
You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.
Learn more about Disodium EDTAGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinPhenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).
It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.
On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.
Another perk of this ingredient is that it stays functional across a wide pH range (3-10).
You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.
Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.
Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.
Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.
Learn more about PhenoxyethanolPotassium Cocoate is basically a liquid coconut soap that's made by cooking coconut oil with potassium hydroxide.
It's a cleanser, foaming, and emulsifying agent that mostly shows up in soaps and "natural" cleansers.
Rinse-off concentrations typically range from 2-25%.
The finished product sits at a fairly high pH (~9-11) because it's a true soap. This just means it can feel drying or slightly stripping if a formula isn't balance with emollients.
Allergy and irritation risk is low as this ingredient was found to be an irritant in less than 1% of subjects (2 of these subjects had active psoriasis and 3 had active eczema).
Fungal acne: The Malassezia yeast feeds on fatty acids in the ~C12-24 range, and Potassium Cocoate is made of exactly those (Lauric C12, Myristic C14, Palmitic C16, Oleic C18:1). Lab studies have shown the yeast can take up Lauric Acid and grows readily on Palmitic Acid. Therefore, this ingredient may not be fungal acne safe.
Learn more about Potassium CocoatePotassium Cocoyl Glycinate is an amino acid-based surfactant and cleaning agent. This ingredient can be derived from animals or plants. It may also be synthetically created from fatty acids of the coconut and glycine.
Potassium Cocoyl Glycinate is a gentle surfactant. Surfactants help gather the dirt, oil, and other pollutants from your skin to be rinsed away. It is a mild cleanser and naturally produces foam.
Chances are, you eat sodium chloride every day. Sodium Chloride is also known as table salt. This ingredient has many purposes in skincare: thickener, emulsifier, and exfoliator.
You'll most likely find this ingredient in cleansers where it is used to create a gel-like texture. As an emulsifier, it also prevents ingredients from separating.
You might see people debate whether Sodium Chloride is comedogenic, but there actually haven't been any comedogenic tests done on it. Either way, the overall formulation of a product matters a lot more than any single ingredient.
You might see this ingredient used in scrubs as a primary exfoliating ingredient.
Learn more about Sodium ChlorideSodium PCA (the salt of PCA) is one of the most well-established humectants in skincare.
Why is it so special? Your skin already makes it naturally; it's a natural component of your skin's Natural Moisturizing Factor (NMF), or the mix of water-binding compounds inside your skin cells that keeps things soft and hydrated.
As a cosmetic ingredient, it grabs water and holds it in the upper layers of skin to smooth roughness and ease dehydration.
There's some clinical support for the NMF approach with a study showing that a cream built to mimic the skin's NMF significantly boosted hydration.
Safety-wise, this ingredient non-irritating, non-comedogenic, and non-phototoxic in testing, with minimal skin absorption.
It also works really well with other hydrators like glycerin or hyaluronic acid, and typical usage is somewhere between 0.2-4%.
Learn more about Sodium PCAWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water