Flower Knows Swan Ballet Six-Color Makeup Palette Ingredients Explained

Silica is a mineral naturally found in our skin. It helps to thicken and smooth the texture of a product. It also acts as an agent for other ingredients by increasing the absorption of other ingredients into the skin.

Silica is often used for absorption and can help reduce shine when products are applied. Silica occurs in naturally in materials like clay and sandstone, and it can also be produced synthetically.

Dimethicone is a silicone used for making products smooth and silky. It also has the added benefit of sealing in hydration. The amount of dimethicone found in beauty products is considered safe and non-comedogenic, meaning it won't clog pores.

Dimethicone has been found increase absorption in skin, boosting the benefits of other ingredients. While there is concern for the safety of dimethicone, the levels used in skincare are safe for use.

Polymethylsilsesquioxane is a silicone used as a film forming agent.

When applied to the skin, this ingredient creates an invisible film on the surface. This film still allows oxygen to pass through, but prevents moisture from escaping. This can help condition and hydrate the skin. It also leaves a silky feel when applied.

We don't have a description for Magnesium Myristate.

Synthetic Wax is created from fossil fuels such as natural gas. It is used to enhance texture, adjust pH, and as an occlusive.

It may also be used as an abrasive ingredient to exfoliate the skin.

Ci 77492 is also hydrated iron III oxide. It's sole purpose is to give a yellow hue to products.

Iron III oxides are classified as inorganic chemicals for coloring.

Nylon-12 is a polymer. It is derived from 12-aminododecanoic acid, an omega-amino fatty acid

According to a manufacturer, it is a talc substitute. Like talc, nylon-12 gives products a satin feel. The manufacturer also claims this ingredients does not block pores and has moderate oil absorption.

This silicone is an emollient. Emollients create a thin film on the skin to prevent moisture from escaping.

It is not soluble in water and helps increase water-resistance in products.

Caprylic/Capric Triglyceride is an emollient, solvent, and texture enhancer. It is considered a skin-softener by helping the skin prevent moisture loss.

Within a product, Caprylic Triglyceride can thicken the product and make spreadability easier by dissolving clumping compounds. An added benefit of Caprylic Triglyceride is its antioxidant properties.

We don't have a description for Polypropylene.

Phenoxyethanol is a preservative that has germicide, antimicrobial, and aromatic properties. Studies show that phenoxyethanol can prevent microbial growth. By itself, it has a scent that is similar to that of a rose.

It's often used in formulations along with Caprylyl Glycol to preserve the shelf life of products.

Triethoxycaprylylsilane is a silicone used to bind and stabilize ingredients.

As an emulsifier, it helps prevent ingredients from separating. This can help elongate the shelf life of products.

Caprylyl Glycol is a humectant and emollient, meaning it attracts and preserves moisture.

It is a common ingredient in many products, especially those designed to hydrate skin. The primary benefits are retaining moisture, skin softening, and promoting a healthy skin barrier.

Aluminum Hydroxide is a form of aluminum. It can be naturally found in nature as the mineral gibbsite. In cosmetics, Aluminum Hydroxide is used as a colorant, pH adjuster, and absorbent.

As a colorant, Aluminum Hydroxide may add opacity, or reduce the transparency. Aluminum hydroxide is contains both basic and acidic properties.

Ci 73360 is a synthetic red-pink dye.

Tocopheryl Acetate is AKA Vitamin E. It is an antioxidant and protects your skin from free radicals. Free radicals damage the skin by breaking down collagen.

One study found using Tocopheryl Acetate with Vitamin C decreased the number of sunburned cells.

Ethylhexylglycerin (we can't pronounce this either) is commonly used as a preservative and skin softener. It is derived from glyceryl.

You might see Ethylhexylglycerin often paired with other preservatives such as phenoxyethanol. Ethylhexylglycerin has been found to increase the effectiveness of these other preservatives.

Ci 77499 is also hydrated iron III oxide. It is created from mixing red and black iron oxides. This helps give shades of darkness to a product.

Iron III oxides are classified as inorganic chemicals for coloring.

Mica refers to a group of silicate minerals. Mica crystals are easily split to give products a shimmer. These crystals are able to reflect light to temporarily give your skin a glowy look.

Mica is found to be safe. Trace amounts of heavy metals may be found in mica, but these metals are not harmful in our personal products.

Ci 77491 is also hydrated iron III oxide. It's sole purpose is to give a red/pink hue to products.

Iron III oxides are classified as inorganic chemicals for coloring.

This pigment is called Ultramarine blue lazurite. It gives a saturated blue color, but can be used to create other colors as well.

According to the manufacturer, it is usually made from kaolin, sodium sulfate, sodium carbonate, sulfur, and charcoal.

Kaolin is a clay. It is used for oil control and to help minimize pores. Like other clays, kaolin has the ability to absorb excess sebum or oil. This can help clean out pores and mattify the skin.

Some types of kaolin may have exfoliating properties. When water is added to kaolin, it becomes a paste with small abrasive particles.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

Calcium Aluminum Borosilicate is made up of calcium, aluminum, and silicates. It is a glass-like material. In cosmetics, it comes in the form of flakes or microspheres.

Calcium aluminum borosilicate is a bulking agent, meaning it helps thicken a product.

Octyldodecanol is a fatty alcohol. It is primarily used to enhance the texture of products.

As an emulsifier, Octyldodecanol helps prevent the oils and waters from separating. It also prevents ingredients from creating foam when shaken.

We don't have a description for Calcium Sodium Borosilicate.

Synthetic Fluorphlogopite is the synthethic version of mica. It consists of fluorine, aluminum and silicate.

Synthetic Fluorphlogopite is used to add volume to products.

Squalane is an emollient that helps the skin hold onto moisture. It's an oily liquid that occurs naturally in certain types of fish and plant oils.

Because squalane boosts hydration in the skin, it also comes with plenty of benefits: it is an antioxidant and can help fight free radicals and skin damage. Squalane is also found to have a detoxifying effect when applied.

We don't have a description for Hdi/Trimethylol Hexyllactone Crosspolymer.

Polysorbate 60 is used to help stabilize products. It is a surfactant and emulsifier. These properties help keep ingredients together in a product. Surfactants help reduce surface tension between ingredients with different states, such as liquids and solids. Emulsifiers help prevent oils and waters from separating.

Polysorbate 60 is sorbitol-based and created from the ethoxylation of sorbitan. Ethoxylation is a chemical reaction used to add ethylene oxide. Sorbitan is a the dehydrated version of sorbitol, a sugar found in fruits.

We don't have a description for Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer.

Potassium Chloride can be bad for oily skin and be bad for acne prone skin.

Chlorphenesin is a synthetic preservative. It helps protect a product against bacteria in order to extend shelf life. In most cases, Chlorphenesin is paired with other preservatives such as phenoxyethanol and caprylyl glycol.

Chlorphenesin is a biocide. This means it is able to help fight the microorganisms on our skin. It is also able to fight odor-releasing bacteria.

Tin Oxide is an inorganic oxide used to add opacity and volume to a product. In nature, it is already found in mineral form. The main ore of tin is an opaque and shiny mineral called casseterite.

Tin Oxide helps remove translucency in a product, or make it more opaque. Besides adding opacity, tin oxide is used for bulking to add volume.

We don't have a description for Ethylcellulose.

Gellan Gum is a high-molecular weight heteropolysaccharide gum. It is created by the process of pure-culture fermentation with the bacterium Pseudomonas elodea.

Gellan Gum is used to stabilize products. This helps improve the texture, consistency, and shelf life.