Selsun Blue Pro-X Anti-Dandruff Shampoo Extra Strength With Menthol Versus Selsun Blue Pro Anti-Dandruff Shampoo 2-In-1 With Conditioner
What's inside
What's inside
Key Ingredients
No key ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Skin ConditioningAmmonium Laureth Sulfate
CleansingAmmonium Lauryl Sulfate
CleansingCocamidopropyl Betaine
CleansingDisodium Laureth Sulfosuccinate
CleansingAcrylates Copolymer
Decyl Glucoside
CleansingDimethiconol
EmollientLaureth-4
EmulsifyingLaureth-23
CleansingPEG-55 Stearate
CleansingGlycerin
HumectantPPG-10 Methyl Glucose Ether
Skin ConditioningSelenium Sulfide
Cocamide Mea
EmulsifyingCetyl Alcohol
EmollientTea-Dodecylbenzenesulfonate
CleansingHydroxypropyltrimonium Honey
Citric Acid
BufferingParfum
MaskingGuar Hydroxypropyltrimonium Chloride
Skin ConditioningPolyquaternium-10
Amodimethicone
Ceteareth-25
CleansingMethylisothiazolinone
PreservativeIodopropynyl Butylcarbamate
PreservativeSodium Chloride
MaskingCI 42090
Cosmetic ColorantArginine
MaskingWater, Ammonium Laureth Sulfate, Ammonium Lauryl Sulfate, Cocamidopropyl Betaine, Disodium Laureth Sulfosuccinate, Acrylates Copolymer, Decyl Glucoside, Dimethiconol, Laureth-4, Laureth-23, PEG-55 Stearate, Glycerin, PPG-10 Methyl Glucose Ether, Selenium Sulfide, Cocamide Mea, Cetyl Alcohol, Tea-Dodecylbenzenesulfonate, Hydroxypropyltrimonium Honey, Citric Acid, Parfum, Guar Hydroxypropyltrimonium Chloride, Polyquaternium-10, Amodimethicone, Ceteareth-25, Methylisothiazolinone, Iodopropynyl Butylcarbamate, Sodium Chloride, CI 42090, Arginine
Water
Skin ConditioningAmmonium Laureth Sulfate
CleansingAmmonium Lauryl Sulfate
CleansingDistearyl Phthalic Acid Amide
EmollientGlycerin
HumectantDimethiconol
EmollientLaureth-4
EmulsifyingLaureth-23
CleansingPEG-55 Stearate
CleansingSelenium Sulfide
Polyester-11
Skin ConditioningCocamide Mea
EmulsifyingParfum
MaskingSodium Chloride
MaskingHydroxypropyl Methylcellulose
Emulsion StabilisingLanolin
EmollientCetearyl Alcohol
EmollientCitric Acid
BufferingHydroxypropyltrimonium Honey
Methylisothiazolinone
PreservativeIodopropynyl Butylcarbamate
PreservativeCellulose
AbsorbentSodium Citrate
BufferingPanthenol
Skin ConditioningSodium Hyaluronate
HumectantWater, Ammonium Laureth Sulfate, Ammonium Lauryl Sulfate, Distearyl Phthalic Acid Amide, Glycerin, Dimethiconol, Laureth-4, Laureth-23, PEG-55 Stearate, Selenium Sulfide, Polyester-11, Cocamide Mea, Parfum, Sodium Chloride, Hydroxypropyl Methylcellulose, Lanolin, Cetearyl Alcohol, Citric Acid, Hydroxypropyltrimonium Honey, Methylisothiazolinone, Iodopropynyl Butylcarbamate, Cellulose, Sodium Citrate, Panthenol, Sodium Hyaluronate
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Ammonium Laureth Sulfate is a type of sulfate.
Ammonium Lauryl Sulfate is a type of sulfate. It can be bad for dry skin, cause irritation, and worsen rosacea.
Citric Acid is an alpha hydroxy acid (AHA) naturally found in citrus fruits like oranges, lemons, and limes.
Like other AHAs, citric acid can exfoliate skin by breaking down the bonds that hold dead skin cells together. This helps reveal smoother and brighter skin underneath.
However, this exfoliating effect only happens at high concentrations (20%) which can be hard to find in cosmetic products.
Due to this, citric acid is usually included in small amounts as a pH adjuster. This helps keep products slightly more acidic and compatible with skin's natural pH.
In skincare formulas, citric acid can:
While it can provide some skin benefits, research shows lactic acid and glycolic acid are generally more effective and less irritating exfoliants.
Most citric acid used in skincare today is made by fermenting sugars (usually from molasses). This synthetic version is identical to the natural citrus form but easier to stabilize and use in formulations.
Read more about some other popular AHA's here:
Learn more about Citric AcidThis ingredient is made by combining the fatty acids from coconut oil with monoethanolamine. It is an emulsifier that helps boost foam, thicken texture, and help keep ingredients together in a formula.
Dimethiconol is a silicone that resembles the popular dimethicone. Like other silicones, it is an emollient. Emollients create a thin film on skin to prevent moisture from escaping.
This ingredient helps to create a silky texture and improve spreadability. Due to its high molecular weight and thickness, it is often combined with cyclopentasiloxane.
Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinWe don't have a description for Hydroxypropyltrimonium Honey yet.
Iodopropynyl Butylcarbamate (IPBC) is a preservative that is especially good at getting fungi and mold out of your cosmetics.
IPBC works by leveraging the antimicrobial properties of its iodine containing structure. Iodine has been used as a germicide since the late 1800s and IPBC is a more refined and stable derivative of it.
It is typically used at very low levels in cosmetics, with most formulations using 0.0125% or less (well below its approved maximum).
In the EU, IPBC concentration limits are set at 0.02% in rinse-off products and 0.01% in leave-on products.
Though IPBC is a relatively uncommon contact allergen, patch testing studies show positive reaction rates ranging from 0.3%-0.9% of patients tested. This is still quite low compared to preservatives like methylisothiazolinone which sits at around 4-5%.
Researchers note that existing iodine sensitives or rubber allergies may be the cause of this as IPBC shares a structure with both thiuram (used in rubber) and iodine.
Be sure to patch test if you are unsure and speak with a medical professional about using this ingredient.
Learn more about Iodopropynyl ButylcarbamateLaureth-23 is created by reacting ethylene oxide with Lauryl Alcohol.
It is a cleansing ingredient. This means it helps lift oils and dirt so they may be rinsed away with water.
The 23 refers to the number of repeating ethylene oxides in the molecule.
Learn more about Laureth-23Laureth-4 is created by reacting ethylene oxide with Lauryl Alcohol. It is a surfactant and emulsifier.
Surfactants reduce the surface tension of ingredients so they can mix better. Emulsifiers prevent ingredients such as oil and water from separating.
MI is a preservative and known skin irritant. In the past, MI was used for its ability to prevent bacteria, yeast, and fungi growth in low doses.
Nowadays, you'll most likely see MI combined with Methylchloroisothiazolinone (MCI).
Since then, numerous studies have shown this ingredient to cause contact dermatitis, or skin irritation.
The use of this ingredient varies around the world:
Learn more about MethylisothiazolinoneParfum is a catch-all term for an ingredient or more that is used to give a scent to products.
Also called "fragrance", this ingredient can be a blend of hundreds of chemicals or plant oils. This means every product with "fragrance" or "parfum" in the ingredients list is a different mixture.
For instance, Habanolide is a proprietary trade name for a specific aroma chemical. When used as a fragrance ingredient in cosmetics, most aroma chemicals fall under the broad labeling category of “FRAGRANCE” or “PARFUM” according to EU and US regulations.
The term 'parfum' or 'fragrance' is not regulated in many countries. In many cases, it is up to the brand to define this term.
For instance, many brands choose to label themselves as "fragrance-free" because they are not using synthetic fragrances. However, their products may still contain ingredients such as essential oils that are considered a fragrance by INCI standards.
One example is Calendula flower extract. Calendula is an essential oil that still imparts a scent or 'fragrance'.
Depending on the blend, the ingredients in the mixture can cause allergies and sensitivities on the skin. Some ingredients that are known EU allergens include linalool and citronellol.
Parfum can also be used to mask or cover an unpleasant scent.
The bottom line is: not all fragrances/parfum/ingredients are created equally. If you are worried about fragrances, we recommend taking a closer look at an ingredient. And of course, we always recommend speaking with a professional.
Learn more about ParfumWe don't have a description for PEG-55 Stearate yet.
Selenium sulfide is used to treat fungal or yeast infections.
Chances are, you eat sodium chloride every day. Sodium Chloride is also known as table salt. This ingredient has many purposes in skincare: thickener, emulsifier, and exfoliator.
You'll most likely find this ingredient in cleansers where it is used to create a gel-like texture. As an emulsifier, it also prevents ingredients from separating.
You might see people debate whether Sodium Chloride is comedogenic, but there actually haven't been any comedogenic tests done on it. Either way, the overall formulation of a product matters a lot more than any single ingredient.
You might see this ingredient used in scrubs as a primary exfoliating ingredient.
Learn more about Sodium ChlorideWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water