What's inside
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Lactobacillus Ferment Lysate
Skin ConditioningWater
Skin ConditioningPropanediol
SolventGlycerin
HumectantNiacinamide
SmoothingButylene Glycol
HumectantCaffeine
Skin ConditioningDipropylene Glycol
Humectant1,2-Hexanediol
Skin ConditioningDiethoxyethyl Succinate
SolventGlyceryl Polymethacrylate
Polyacrylate Crosspolymer-6
Emulsion StabilisingMannitol
HumectantEthylhexylglycerin
Skin ConditioningAdenosine
Skin ConditioningSodium Citrate
BufferingDextrin
AbsorbentTheobroma Cacao Extract
Skin ConditioningCitric Acid
BufferingDisodium EDTA
T-Butyl Alcohol
PerfumingArginine
MaskingCyclodextrin
AbsorbentHydroxypropyl Cyclodextrin
MaskingMaltodextrin
AbsorbentXanthan Gum
EmulsifyingBeta-Glucan
Skin ConditioningAcetyl Tetrapeptide-11
Skin ConditioningTocopherol
AntioxidantLactobacillus Ferment Lysate, Water, Propanediol, Glycerin, Niacinamide, Butylene Glycol, Caffeine, Dipropylene Glycol, 1,2-Hexanediol, Diethoxyethyl Succinate, Glyceryl Polymethacrylate, Polyacrylate Crosspolymer-6, Mannitol, Ethylhexylglycerin, Adenosine, Sodium Citrate, Dextrin, Theobroma Cacao Extract, Citric Acid, Disodium EDTA, T-Butyl Alcohol, Arginine, Cyclodextrin, Hydroxypropyl Cyclodextrin, Maltodextrin, Xanthan Gum, Beta-Glucan, Acetyl Tetrapeptide-11, Tocopherol
Water
Skin ConditioningPropanediol
SolventGlycerin
HumectantPolyglycerin-3
HumectantGlyceryl Polymethacrylate
1,2-Hexanediol
Skin ConditioningPEG-8
HumectantPEG-7 Glyceryl Cocoate
EmulsifyingPolysorbate 20
EmulsifyingAcrylates/C10-30 Alkyl Acrylate Crosspolymer
Emulsion StabilisingHydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Emulsion StabilisingTromethamine
BufferingGlyceryl Caprylate
EmollientMannitol
HumectantHydrolyzed Collagen
EmollientParfum
MaskingEthylhexylglycerin
Skin ConditioningAdenosine
Skin ConditioningButylene Glycol
HumectantDisodium EDTA
Sorbitan Isostearate
EmulsifyingMethyl Methacrylate/Acrylonitrile Copolymer
CI 77480
Cosmetic ColorantAureobasidium Pullulans Ferment
Skin ConditioningResveratrol
AntioxidantMagnesium Sulfate
Calcium Chloride
AstringentAcetyl Tetrapeptide-11
Skin ConditioningManganese Sulfate
Skin ConditioningTocopherol
AntioxidantChenopodium Quinoa Seed Extract
Skin ConditioningZinc Sulfate
AntimicrobialAscorbyl Glucoside
AntioxidantWater, Propanediol, Glycerin, Polyglycerin-3, Glyceryl Polymethacrylate, 1,2-Hexanediol, PEG-8, PEG-7 Glyceryl Cocoate, Polysorbate 20, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Tromethamine, Glyceryl Caprylate, Mannitol, Hydrolyzed Collagen, Parfum, Ethylhexylglycerin, Adenosine, Butylene Glycol, Disodium EDTA, Sorbitan Isostearate, Methyl Methacrylate/Acrylonitrile Copolymer, CI 77480, Aureobasidium Pullulans Ferment, Resveratrol, Magnesium Sulfate, Calcium Chloride, Acetyl Tetrapeptide-11, Manganese Sulfate, Tocopherol, Chenopodium Quinoa Seed Extract, Zinc Sulfate, Ascorbyl Glucoside
Reviews
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.Â
It is a:
- Humectant, drawing moisture into the skin
- Emollient, helping to soften skin
- Solvent, dispersing and stabilizing formulas
- Preservative booster, enhancing the antimicrobial activity of other preservativesÂ
This synthetic peptide is a signal peptide, meaning it tells your skin to create more collagen and elastin.
According to a manufacturer, Acetyl Tetrapeptide-11 helps improve skin elasticity and firmness.
Adenosine is in every living organism. It is one of four components in nucleic acids that helps store our DNA.
Adenosine has many benefits when used. These benefits include hydrating the skin, smoothing skin, and reducing wrinkles. Once applied, adenosine increases collagen production. It also helps with improving firmness and tissue repair.
Studies have found adenosine may also help with wound healing.
In skincare products, Adenosine is usually derived from yeast.
Learn more about AdenosineButylene Glycol (or BG) is used within cosmetic products for a few different reasons:
Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
Learn more about Butylene GlycolDisodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.
This ingredient mainly works behind the scenes and helps with:
On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.
One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).
Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.
You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.
Learn more about Disodium EDTAEthylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Learn more about EthylhexylglycerinGlycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Learn more about GlycerinThis is a synthetic polymer made by combining glycerin with polymethacrylic acid.
It is a non-drying, non-greasy moisturizer that helps enhance the feel and slip of formulations, helps stabilize emulsions, creates a film, and controls viscosity.
As a film former, it creates a light and flexible layer on the skin's surface. This helps lock in moisture without feeling heavy.
It's typically used at concentrations up to 1.9% in leave-on products. CIR has concluded that these ingredients are safe in cosmetics at current use levels.
Due to its large molecule size, it doesn't readily penetrate into skin and mostly just sits on the surface. A large UK-based patch test study of over 1,300 patients found that sensitization to related acrylate copolymers is rare.
Learn more about Glyceryl PolymethacrylateMannitol is a sugar alcohol. It is a humectant and moisturizes the skin. In vitro (not tested on a living organism), mannitol displays antioxidant properties.
When found in aqueous solutions, mannitol tends to become acidic. This is because it loses a hydrogen ion. This is why mannitol can often be found with pH adjusting ingredients, such as sodium bicarbonate.
Fun fact: Mannitol can be found in foods as a sweetener. It can be naturally found in mushrooms, algae, fruits, and veggies.
Learn more about MannitolPropanediol is an all-star ingredient. It softens, hydrates, and smooths the skin.Â
It’s often used to:
Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.
Learn more about PropanediolTocopherol is a fat-soluble antioxidant known as Vitamin E.
You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.
Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.
It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.
This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.
This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.
In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.
Concentrations usually range from 0.1-1% in most leave-on products.
Learn more about TocopherolWater. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Learn more about Water